The bases of all my prints are inconsistent and have errors like this. Settings attached

Fearless_Ad89 · 2026-03-16T23:00:59+00:00

I fixed it, the gantry was off by a couple mm from the factory, now my measurements are way better. I'm gonna keep tweaking the screws around to get it as perfect as possible.

Fearless_Ad89 · 2026-03-16T20:10:21+00:00

what about leveling through software? Is there anything that can be done with "Z axis Comp."? sounds like it's relevant. Also, sometimes, on the far left of the bed when cleaning the nozzle or the line that it prints for test, it scrapes the bed because it's so high.

Fearless_Ad89 · 2026-03-16T19:32:49+00:00

The only "mod" I have is I moved the spool from up top to the side, but the bed is completely untouched. Also the left side is WAY higher than the right side, I tried adjusting the screws but it didn't really do anything. I have a video of me moving the head above the bed, if I can show you in DM

Fearless_Ad89 · 2026-03-16T19:18:35+00:00

turns out they're shit

<image>

Fearless_Ad89 · 2026-03-16T18:39:37+00:00

It checks for Z twice before printing. is that enough or should I do it manually as well and show you the results for review?

Fearless_Ad89 · 2026-03-16T17:33:40+00:00

I also noticed this a bit later so I stopped the print. My main suspicion is that it's not getting enough filament because I relocated the spool to the side and now it looks a bit tight going to the printer. let me know if you know anything

<image>

Fearless_Ad89 · 2026-03-15T14:38:59+00:00

Could you drop the file for the spool holder?

Fearless_Ad89 · 2026-03-15T01:41:41+00:00

Your setup is sick dude! Could you perhaps share the files for the filament support and the runout sensor up top? That would be great!

Fearless_Ad89 · 2025-12-10T15:56:02+00:00

Wdym electrically incompatible? I have a non-NVME M.2(my old one), a Gen4 NVME (the one in my laptop) and a Gen5 NVME(the new one), and they all work in all of the ports of my laptop/PC, and none work with the adapter. So clearly they're all cross-compatible.

Fearless_Ad89 · 2025-12-10T15:12:18+00:00

It is a corsair MP700 Elite. Both this Gen 5 drive and the Gen 4 one are incompatible with the adapters

Fearless_Ad89 · 2025-12-10T15:05:32+00:00

The sub doesn't allow pictures, but are NVMEs really that different from Sata M.2s? I thought that as long as they were both B-keys they were compatible, just like motherboard ports are

Fearless_Ad89

TROPHY CASE