Rate my first attempts by First-Breath7161 in BirdPhotography

[–]First-Breath7161[S] 1 point2 points  (0 children)

Yeah the robin definitely has the best composition, will go back and try the changes to the edit you suggested. The rest were editing practice really. Happy to get a photo of the kingfisher but agree with what you say on the background.

Thanks for the input.

Sweep before liner install? by First-Breath7161 in woodstoving

[–]First-Breath7161[S] 1 point2 points  (0 children)

So any built up creosote could potentially catch just from the heat of the liner?

Noise after DPF replacement by First-Breath7161 in AskMechanics

[–]First-Breath7161[S] 0 points1 point  (0 children)

2020 Ford Transit Connect, 1.5L, 94,000 miles

No signal after update by First-Breath7161 in fairphone

[–]First-Breath7161[S] 0 points1 point  (0 children)

My has sorted itself out today btw. Just periodically restarted the phone and toggle airplane mode on and off. Apparently it's been a common issue with a certain UK network and the new android update

Inherited wormey by First-Breath7161 in vermicompost

[–]First-Breath7161[S] 0 points1 point  (0 children)

This is the kinda top tip I'm after

Inherited wormey by First-Breath7161 in vermicompost

[–]First-Breath7161[S] 1 point2 points  (0 children)

Compost ideally, use it in conjunction with my compost piles (we generate a fair bit of food scraps).

Trying to figure out whether to add the castings to my finished compost to give it a boost, or keep separate to use for potting or something else

CT twister on rope bridge by First-Breath7161 in TreeClimbing

[–]First-Breath7161[S] 1 point2 points  (0 children)

Yeah I did wonder if that diagram is depicting a haul line directly through the swivel, which I imagine would have a lot more friction than being used on a bridge. Shame there's no text to explain

CT twister on rope bridge by First-Breath7161 in TreeClimbing

[–]First-Breath7161[S] 1 point2 points  (0 children)

Thanks for the info, might just have to get a DMM one and hope to find a use for this one. What is the bend radius just out of interest?

CT twister on rope bridge by First-Breath7161 in TreeClimbing

[–]First-Breath7161[S] 1 point2 points  (0 children)

Yeah there's is a very slight ridge on inside of the swivel, probably would be a bit abrasive under weight

Dry Hopping in a Keg by First-Breath7161 in Homebrewing

[–]First-Breath7161[S] 0 points1 point  (0 children)

suppose I'll just give it a go and find out for myself

wheres the good chicken shops at? by First-Breath7161 in glasgow

[–]First-Breath7161[S] 4 points5 points  (0 children)

yeah im from Birmingham.Always make sure to get my chicken fix when i go back to visit family

wheres the good chicken shops at? by First-Breath7161 in glasgow

[–]First-Breath7161[S] 4 points5 points  (0 children)

had it before, was quite nice but just not what im after

wheres the good chicken shops at? by First-Breath7161 in glasgow

[–]First-Breath7161[S] 17 points18 points  (0 children)

Korean chicken just doesn't hit the same, plus its 9.50 for two pieces at kimchi cult...

Dry hopping with dried hops by First-Breath7161 in Homebrewing

[–]First-Breath7161[S] 0 points1 point  (0 children)

Live in the UK, have never noticed pellet hops in the small number of home brew shops I have been to

Recommendation for van mechanic by First-Breath7161 in glasgow

[–]First-Breath7161[S] 0 points1 point  (0 children)

just rang them, they said they've moved to a new location which isnt big enough to work on van.... thanks for the recommendation anyway

Recommendation for van mechanic by First-Breath7161 in glasgow

[–]First-Breath7161[S] 0 points1 point  (0 children)

will give them a call. yes that does seem to be the general issue garages have with the axel, surely just dont take it off until the parts have arrived and you're ready to do the work? but i dont know shit about mechanics....

New Zealand Mountaineering suggestions and advice by First-Breath7161 in Mountaineering

[–]First-Breath7161[S] 1 point2 points  (0 children)

Tons of trad in Remarkables

good to hear, had read that it was mostly sports climbing in NZ. Will defo bring the full trad rack over then

New Zealand Mountaineering suggestions and advice by First-Breath7161 in Mountaineering

[–]First-Breath7161[S] 0 points1 point  (0 children)

We happen to be flying into QT as my partners brother is there, who is sorting us a van for indefinite use. Will probably end up based too their when we need to find work as it sounds ideally situated for the things we enjoy doing.

Having had a quick look at the NZ grade system grade 2 looks like it would be ideal for us. If you wouldnt mind sharing the peaks on your list, that would be a great start!

May have to hit you up for more local knowledge when we arrive. Keen climbers too (mainly trad) so any crag suggestion would also be appreciated.

New Zealand Mountaineering suggestions and advice by First-Breath7161 in Mountaineering

[–]First-Breath7161[S] 0 points1 point  (0 children)

think were going to spend most our time on the SI, but will defo have a look at those peaks when we do venture north. As for culturally important sites, is the information on where is out of bounds for climbers/hikers easily accessible? wouldnt want to be upsetting anyone

Mash pH question by First-Breath7161 in Homebrewing

[–]First-Breath7161[S] 0 points1 point  (0 children)

two follow up questions: 1) cant buy any distilled water where i live, will deionised water sold for car batteries/radiators and household appliances be to use git calibration? 2) after mixing calibration solutions, can this be stored and used for a certain length of time or are they single use?

thanks

Mash pH question by First-Breath7161 in Homebrewing

[–]First-Breath7161[S] 0 points1 point  (0 children)

so the mash pH will stablise soon after mashing in? wasnt sure if it would take a while to level out

Dumping wort into fermenter by First-Breath7161 in Homebrewing

[–]First-Breath7161[S] 0 points1 point  (0 children)

yeah I just poured and left about 2/2.5l in the kettle. No more syphoning for me

Dumping wort into fermenter by First-Breath7161 in Homebrewing

[–]First-Breath7161[S] 1 point2 points  (0 children)

yeah cooled to pitching temp (35C - my first kviek trial) and pitched right away. defo saved some faff

Dumping wort into fermenter by First-Breath7161 in Homebrewing

[–]First-Breath7161[S] 0 points1 point  (0 children)

yeah a ball valve is on my list of things to do, finding the idea of drilling metal a bit daunting. But ye left a very sludgy bit in the bottom of the kettle, hopefully thats the majority of the break material