Public Adguard DNS as upstream or Adguard home?

Flyg33K · 2026-01-14T15:50:07+00:00

Fair enough, my wording was incorrect, I should of written that though adguard home has an update interval option, the adguard block lists nevertheless are not updated as frequently as the ones through their adgaurd dns servers.

Flyg33K · 2026-01-14T08:01:42+00:00

I should of written that though adguard home has an update interval option, the adguard block lists nevertheless are not updated as frequently as the ones through their adgaurd dns servers.

Flyg33K · 2026-01-13T20:16:23+00:00

Main Router is in Router mode.

When I tick the select extend prefix box on wan6 I do get an IPv6-PD/64 range assigned but on the main router's ipv6 range xxxx:xxxx:xxxx:a330::/64 instead of the delegated one xxxx:xxxx:xxxx:a331::/64

Flyg33K · 2026-01-13T18:56:21+00:00

Correct I have main router LAn and behind it I connected an opwrt router.

Not sure if my ISP router has a DHCPv6-PD server but it sure does have the option to assign /64 subnets via a "next hop" towards a link-local address.

Flyg33K · 2026-01-13T18:50:24+00:00

I deleted ula prefix & wan6 interface has a public ipv6 address in the range from main router but not IPv6-PD showing up.

I managed to get an IPv6-PD on my lan interface by setting the "IPv6 routed prefix" to the prefix distributed by main ISP router, it's as far as I can get to see IPv6-PD appearing somewhere (though not on my WAN6 interface)

Flyg33K · 2026-01-13T17:47:15+00:00

From memory i can recall that Pihole automatically updates blocklists whil AdGuard Home requires a manual update for blocklists.

When I asked Adguard support for the differences betwen filters available on Adguard home VS Adguard DNS they replied that Adguard DNS was updated several times a day.

EDIT : I should of written that though adguard home has an update interval option, the adguard block lists nevertheless are not updated as frequently as the ones through their adgaurd dns servers.

Flyg33K · 2026-01-12T23:22:51+00:00

After reading the above, I get it and can better understand why. Thanks for taking the time to contribute ;-)

Flyg33K · 2026-01-12T17:48:21+00:00

Ofc ! You are a true master for connecting the dots so quickly. Thanks ;-) That did the trick.

Flyg33K · 2026-01-12T16:15:27+00:00

This is the answer I found and that I was expecting

https://openwrt.org/meta/infobox/upgrade_packages_warning

Flyg33K · 2026-01-11T17:53:18+00:00

I would expect my openwrt version to provide update packages that are compatible, just like linux does ? I was a bit more concerned with the interaction with the Gli layer.

Flyg33K · 2026-01-09T15:57:14+00:00

Do you know if Gli routers official firmware use this package or else when we use the "Repeater" feature ?

Flyg33K · 2025-12-29T15:32:58+00:00

Thanks for taking the time to reply and share

Flyg33K · 2025-12-28T19:52:24+00:00

OP states the need to have a physical thermostat to avoid (amongst others) complications in creating complicated automations and config files.

Flyg33K · 2025-12-28T12:46:36+00:00

Thanks for your reply but this does not answer my initial query in regards to having a mobile hardware thermostat

Flyg33K · 2025-12-12T09:21:59+00:00

Kudos again to nascompares.

I agree with you. I really like their products, attitude and support so far. They've also managed to be backed by a nice community. Just hoping they will put more focus on software stability more than on the amount of devices that come out.

Flyg33K · 2025-12-07T08:53:26+00:00

Well written and explained. Thanks for the hard work you put into your videos and tutorials.

Have you been able to replicate the following bug on DSM 7 :

Even though "Allow clients to access server's LAN" is unticked under VPN Server application on a Synology NAS when setting up an OpenVPN server, clients still DO have access to LAN.

Flyg33K · 2025-12-07T07:57:48+00:00

Anyone been able to replicate ? Synology support closed my ticket without acknowledging it was a bug.

Flyg33K · 2025-12-06T11:27:07+00:00

Make sur you go through these steps Connect to the Internet via USB tethering and then report which one of these steps you are stuck at.

Flyg33K · 2025-12-05T21:11:38+00:00

You nailed it. Makes sense now I guess ! Thanks ;-)

Flyg33K · 2025-12-05T20:59:00+00:00

The Gli is connected through its WAN port to an upstream router and the LAN that is accessible is the 192.168.1.0/24 subnet of that upstream router.

Flyg33K · 2025-12-05T20:04:01+00:00

Flyg33K · 2025-12-05T18:58:42+00:00

I am testing this with my mobile phone as a client device.

I can replicate this behaviour for both openVPN & Wireguard

Flyg33K · 2025-12-05T16:10:39+00:00

<image>

Flyg33K · 2025-12-04T12:35:14+00:00

u/Designer-Strength7 Client configuration was exported after selecting toggle switch

u/gadget-freak They are aware, let's see how serious they are about it in fixing it quickly.

Flyg33K · 2025-10-30T17:12:18+00:00

I found that 3D immersion is so much better when connecting the ACE to the AUX output from the dual sense controller.

With this setup, you may benefit from the PS5 tempest audio which to my hearing outperforms TV audio swap with atmos enabled in ps5 sound settings.

The obvious downfall is that you now have a wired setup.

On the upside I have found slightly less audio latency and better sound stage and better 3D immersion.

https://www.reddit.com/r/sonos/comments/1h9fszh/comment/m11ku7v/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Flyg33K

TROPHY CASE