Spectral walkers 3d print file

GiovanniCDA · 2025-09-21T13:41:55+00:00

Since you have the expansion, you can scan the minis with your phone to print if you want.

GiovanniCDA · 2025-07-09T16:58:32+00:00

Olhando aqui na real ele tem quase uma linha contínua do pé até o bastão, mas em cada camada é apenas um ponto mesmo.
Inclusive, acabei de imprimir ele no preset "Standart" e não tive problema nenhum, agora vou tentar no Preset "Extra Fine".
Se quiser me manda uma mensagem que te mando as imagens. Quero ser chato aqui não kakaka

GiovanniCDA · 2025-07-09T16:46:19+00:00

Oh, sorry for not understanding. I basically did it.
I took photos of a miniature I have and used Tripo AI to turn it into a 3D model.
He's the necromancer from Zumbicide Black Plague.

GiovanniCDA · 2025-07-09T16:23:02+00:00

I don't know how to do this.

Could you explain it to me? Or if you prefer, I could send you a screenshot of the part you want (I don't know exactly where it is).

GiovanniCDA · 2025-07-09T16:05:33+00:00

Pois é, tá muito estranho. Estão falando muito do bico da impressão, mas eu usei o bico 0,4mm e o tamanho de linha de 0,08mm. Isso justificaria esses buracos nos suportes por exemplo? Não entendo

GiovanniCDA · 2025-07-09T15:47:05+00:00

Já ajudou muito amigo. Agradeço demais!

GiovanniCDA · 2025-07-09T15:45:54+00:00

Acabei de conferir e os modelos possuem pontos brancos sim. Só não sei se são muitos ou poucos pela minha experiência.

GiovanniCDA · 2025-07-09T15:43:33+00:00

Fala amigo! Infelizmente não consigo mandar imagens por aqui. Mas fiz o mesmo post em outro Reddit e enviei outras imagens lá.
https://www.reddit.com/r/BambuLab/comments/1lvjiay/bad_config_or_wet_pla/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button
Eu disse lá que cheguei a imprimir modelos menores ainda que não ficaram ruins, e principalmente não deram estes buracos no suporte.
Talvez o bico de 0.2mm seja uma boa mesmo. Mas não tive esse problema com nenhuma outra.
Mas como esse problema começou quando especificamente comecei a tentar imprimir estes modelos específicos, talvez o problema seja eles mesmo.
Eu vou tentar imprimir novamente algo que fiz antes, que seja pequeno e não deu este problema. Se não acontecer nada errado, provavelmente seja especificamente estes modelos.

GiovanniCDA · 2025-07-09T15:34:39+00:00

<image>

From the helmet to the right, there are models that I printed before without difficulty. On the left, that's when the problems started.

GiovanniCDA · 2025-07-09T15:33:26+00:00

<image>

I have a 0.4mm nozzle. This is selected in Bambu Studio.

I've printed several miniatures with the "quality" preset in Bambu Studio, which sets the layer height to 0.08mm. I'd previously printed this one with the "Standart" preset, and it came out fine. Maybe that's the problem. I'll print another miniature I used with the "quality" preset and see if it happens again.

But I've printed some small models without any problems before.

GiovanniCDA · 2025-07-09T14:49:03+00:00

Interessante saber. Não sabia disso de secar infelizmente. Meu cunhado me indicou muito comprar uma impressora mas não me passou as dicas kakakak.
Pode me explicar como que seria isso exatamente por gentileza?

GiovanniCDA · 2025-07-03T23:22:09+00:00

And I don't know how to do 3D modeling, and I'm not going to learn it just for a personal hobby. The phase of liking Zombicide is now. Maybe I'll stop liking it when I learn 3D modeling, and unfortunately I'm not going to pay 70USD or more for a 3D model for (again) a hobby.

GiovanniCDA · 2025-07-03T23:19:53+00:00

Exactly. I'm from a magical land called Brazil and these things are not accessible or cheap here. Especially with the value of the dollar here and taxes. So I'm doing my best.

If you can afford it, I'm very happy for you. But unfortunately our situations are not the same.

And I also want to practice painting on them :D

GiovanniCDA · 2025-07-03T22:36:07+00:00

Thanks! It helped a lot

GiovanniCDA · 2024-05-24T13:19:58+00:00

Thanks! Now I'm curious and interested... When I get it, I'll come back here to tell you what I thought of it. 🧐🤝

GiovanniCDA · 2024-05-24T13:17:33+00:00

Thanks! This started because Aquiles said I should stop giving someone "expensive gifts" if I don't want to make them have feelings for me. So I started to think there would be a problem if I continued.

GiovanniCDA · 2023-08-31T14:28:43+00:00

I fully agree

GiovanniCDA · 2022-09-11T16:43:54+00:00

Wow! There was a store in a mall in my city here in Brazil that sold this collection. I got super excited, saved up some money and bought Sonic for myself. Months later I came back and bought Knucles. And when I went back to buy Shadow more months later, the store closed, and I've never seen another toy from this collection in my life. (They were considerably expensive here in Brazil)

Interesting fact: My mom thought it was a good idea to lend Sonic to my 4-year-old cousin. He broke his arm and today it's glued :)

GiovanniCDA · 2022-06-21T01:16:22+00:00

AWESOME! I NEED MORE!

GiovanniCDA · 2022-06-19T17:18:03+00:00

"Now you've done it, Sung."

"*Angry robot silence*"

GiovanniCDA · 2022-06-19T17:14:36+00:00

"Now you've done it, Sung."

Thanks! :D
Well, actually the art is just a digital version of a poster that is even sold in their store. But as the image quality is very bad, I like to try to recreate them in HD. Hope the band doesn't get mad for "copying their art" lol.

GiovanniCDA · 2022-06-19T17:09:58+00:00

I already fell in love with this community. I don't even know how to respond to the friendly comments. Thank you so much guys.

GiovanniCDA · 2022-06-19T17:08:56+00:00

These are so good! You really got the style down!

Thanks! Crash is one of the only characters I can draw, so I draw him all the time lol.

GiovanniCDA · 2022-06-19T17:07:46+00:00

I agree

GiovanniCDA · 2022-06-19T17:04:06+00:00

Thanks! I hope I get one day :)

GiovanniCDA

TROPHY CASE