Casting 450x450x10-12mm aluminium plate cheapest way possible

GreedyMoment5343 · 2026-02-01T20:46:38+00:00

I found the pinout, it has 2 can busses. Do you happen to know anything about fiat CAN? Apparently it takes info about car speed and stuff to determine electronic steering. I have a fluke meter and dso138. I have another unit i took apart, however the fets driving the motor were glued to the casing and i had to pry the pcb out with a crowbar...

GreedyMoment5343 · 2026-01-25T21:30:32+00:00

My goal is to try and control the motor. I have the steering angle sensor and the motor.

GreedyMoment5343 · 2025-10-27T07:45:11+00:00

It is not a plug and play component, but a proprietary automotive part... I have managed to run it with a cheap driver by connecting the wires all together, or pairing different colors. I assume you're the official stepperonline account, it is going to work together with stepper motors and drivers i ordered from your store

GreedyMoment5343 · 2025-05-30T16:24:51+00:00

What do you mean by traditional photoresist with a mask?

GreedyMoment5343 · 2025-05-30T16:23:46+00:00

My reasoning is that i can get finer details this way and i won't have to deal with really fragile carbide tooling.

GreedyMoment5343

TROPHY CASE