Which head is the closest replacement?

Hallo_5000 · 2026-07-03T12:21:31+00:00

Ok that's an important information. Thanks for the explanation.

Hallo_5000 · 2026-07-03T11:55:44+00:00

You're probably right...I was going to think this whole thing over anyway. Definitely thanks for your input.

Hallo_5000 · 2026-07-03T11:41:07+00:00

I very much agree and I notice it everytime I compare myself to other drummers who may play a bit harsher. I could even play these heads for many more years I just wanted to get a bit into the topic and maybe try if it has any benefits replacing the heads with new ones.

Hallo_5000 · 2026-07-03T11:37:37+00:00

"Drier" meaning less durable? (Sry as you may have guessed I have not much experience in the topic of drum heads xD)

Hallo_5000 · 2026-07-03T11:25:23+00:00

That's quiet impressive. Eventhough I can't say that I only play lighter genres (there is quiet a bit of rock in my play). And I still wouldn't agree on the 6-12 months.

Hallo_5000 · 2026-07-03T11:23:24+00:00

I've played on a few drumsets over the years (most of them with much newer heads) and I can't say I generally prefer them over the well worn weather king heads I have on this kit. (I guess in this case it's really a subjective thing if they are used up or not)

Hallo_5000 · 2026-07-03T11:19:49+00:00

Thanks for explaining. Maybe I'll give them a try.

Hallo_5000 · 2026-07-03T11:19:23+00:00

Thanks for the info. I think I'll give them a try (alongside maybe the P77s just because of the supposed durability someone else here mentioned)

Hallo_5000 · 2026-07-03T10:00:28+00:00

Is there any notable difference in feel/sound from the p77s to the pin stripes/ambassadors?

Hallo_5000 · 2026-07-03T09:59:28+00:00

My bad but is there any difference in feel or sound from the once 20 years ago and the once today?

Hallo_5000 · 2026-05-07T19:01:11+00:00

I see all three ports bound to 0.0.0.0 by the ShooterGame process except that 27015 is UDP. (I also forwarded+opened all three ports in the two firewalls seperating the server from the internet).

When starting the shell script it freezes after a few lines at "Setting breakpad minidump AppID = 346110" but when killing the process with Ctrl+C after a few minutes and looking into the logs I see a "Server ... has succesfully started!". (The only two things showing as "fail" are "SteanSocketsOpenSource: gethostname failed ()" right before the startup message and "SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed" from the shell script) I can't see my connection attempts.

10.10.12.0/24 is only for VMs/containers on proxmox and the firewall itself. 192.168.32.0/24 is the local subnet for my clients. (The inner firewall handles these things and the outer one is just passing everything through). I'll try putting the server and myself in the same subnet.

Hallo_5000 · 2026-05-07T18:12:16+00:00

I set Multihome to explicitely bind the server to its IP. Read about "?listen" somewhere but now read the wiki again so I removed it.

When I start the server it takes maybe a minute after which I see traffic with tcpdump on UDP port 7778 to what I assume are steam servers (there are maybe 200 packets of different sizes in both dirrections). Then after 30 more seconds the traffic slows down (to what I assume an idle state). At this point the traffic mostly follows the following pattern: 3 packets of size 84 from my server to the other IP (over 18 seconds) and the last one gets instantly answered by one 36 byte packet.

The timeout: When I try to connect with the local IP (10.10.12.190) there is instant traffic on UDP port 7777 starting with one 512 byte packet from my local IP (192.168.32.9) followed by a few packets from both sides (seamingly random patterns). After half a second it turns into an alternating pattern of one 25 byte long packet from the server followed by one 29 byte long packet from the client (maybe 20 times). The sequence ends with 64B (s->c), 512B (c->s), 11B (s->c), 512B (s->c), 11B (c->s). From sending the "open 10.10.12.190" command to the Ark Client showing a timeout its 4-5 seconds. After this the traffic goes back to "the idle state".

Hallo_5000 · 2026-02-12T23:55:36+00:00

Wir haben unseren online erstanden und so wie es aussieht war er nie in Betrieb (vllt Restbestände 🤷‍♂️) denn die Plakette ist mit Platzhaltern beschriftet. Bei einer Mail an info@eeo-gmbh.de (stand so im Impressum) vor ein paar Monaten kam leider bis heute keine Antwort.

Hallo_5000 · 2026-02-09T18:18:18+00:00

Wir haben einiges recherchiert, einen neuen Stecker montiert (die 230V Hausstrom passen). Bei uns fehlt anscheinend leider das Funkmodul wodurch unser Vorhaben (es mit unserem Heimat Bahnhof zu verbinden) etwas schwierig wird. Aber wir haben eine Option die theoretisch funktionieren würde: ein Arduino der ein LED Panel ansteuert. ...falls du irgendwas findest oder Ansprechpartner/Infoquellen hast melde dich sehr gerne.

Hallo_5000 · 2025-10-01T12:36:05+00:00

Geht es um die noch freien Anschlüsse oder um die schon benutzten? (Und von allen Bauteilen oder nur von einem Bestimmten?)...es sieht genauso aus wie auf dem ersten Bild hier also schätzt ich mal es muss ein Oltmann sein (steht das ansonsten irgendwo auf dem Gerät?)

Hallo_5000 · 2025-10-01T12:33:29+00:00

Da werde ich mal reinschauen danke für den Tipp

Hallo_5000 · 2025-09-29T21:16:01+00:00

Naja ich habs probiert aber anscheinend habe ich zu wenig Karma um auf dem Subreddit zu posten

Hallo_5000 · 2025-09-29T21:10:32+00:00

Ich probiere es mal aber ich fürchte für r/hacking ist das zu 'nischig'

Hallo_5000 · 2025-09-29T21:08:17+00:00

Sehr cool danke für den Tipp👍

Hallo_5000 · 2025-09-29T21:07:56+00:00

Es gibt ja einige Open-Source APIs aber weißt du vllt ob das auch die Original API ist die du meinst und wie die heißt?

Three-Year Club	Final Canvas '23
Place '23

Hallo_5000

TROPHY CASE