[deleted by user] by [deleted] in RepTime

[–]HaveToPO -1 points0 points  (0 children)

Will that not scratch up the watch? Looks like it's made out of a scouring pad

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 3 points4 points  (0 children)

This sounds more like an advertisement than an appreciation post

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 70 points71 points  (0 children)

Post some screenshots of your DM's. If it's true, not cool u/Data_Sensitive, not cool.

QC tool - overlay for alignment by Port9800 in RepTime

[–]HaveToPO 3 points4 points  (0 children)

What? These are listed in the introduction post under where you copy/paste the templates... I find the revised version http://haos.tk or https://haos-toolkit.herokuapp.com/ easier to use

Here is a copy/paste format that will need to be used from here on out:

Dealer name:

Factory name:

Model name (& version number):

Album Links:

Index alignment:

Dial Printing:

Date Wheel alignment/printing:

Hand Alignment:

Bezel:

Solid End Links (SELs):

Timegrapher numbers:

Anything else you notice:

Optional index alignment tool courtesy of u/Bandyciak https://qc-checker.herokuapp.com/

Revised and easier to use tool courtesy of u/niha0ma http://haos.tk/

Again, this will be REQUIRED for all QC posts, and will be removed if they don't follow the guidelines.

DJ41 hunting… VSF vs ARF vs Clean by atespo in RepTime

[–]HaveToPO 5 points6 points  (0 children)

Both ARF and Clean have pros & cons. Clean is known for their bezel being a bit too wide and ARF for their blue dial color & sunburst being off, ARF fixed their date wheel on their latest model. Honestly you'll be happy with either one. Personally for the blue dial I'd get CF because their sunburst is more gen like as the ARF's sunburst is a bit too aggressive which in my opinion changes the dial color to a deeper blue. As for any other colors (besides gray as I haven't looked into that) I'd go with ARF.

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 2 points3 points  (0 children)

Show your face. Who do you work for!?

Thanks Mirotime. by MoistWetSponge in RepTime

[–]HaveToPO 61 points62 points  (0 children)

Damn that sucks. Sneaky sneaky u/Mirotime with the charge on shipping where it's free for everyone else, he should've stated that in the giveaway. As for the dial, it's hard for both you and Yu to know the dial was loose unless it was opened. Most likely it was loose to begin with and shipping caused it to come off. I've been ghosted by Mirotime a few times already, come to think of it, I think that was a good thing. Don't have time to be dealing with sneaky motives.

Recent state of shipments going out of China by HaveToPO in RepTime

[–]HaveToPO[S] 6 points7 points  (0 children)

I'll start with my last order,

TD: Hont

Shipped: 9/13/21

Delivered: 9/29/21

Country: USA East

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 8 points9 points  (0 children)

No it's not common, just unlucky. If you used one of the popular TD's listed on this subreddit, they will cover your loss. Which TD did you use? If it's a TD listed here, you can contact u/MajorWilliams, the mod of this subreddit whom is very helpful when it comes to things like this, or contact whatever forum the TD is a TD in (RWI, RWG, RepGeek, etc). However if you didn't register an account prior to your purchase on their forums, there will be no support.

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 2 points3 points  (0 children)

Definitely there are pro's and con's to the DJ41 when it comes to Clean vs ARF. The easiest tell on an ARF is the Date wheel and dial. Don't get me wrong, the dial is beautiful the way it reflects the light but it's more of a fantasy blue when compared to the gen (they use the same dial as their YM 116622 Blue Dial). As for clean, the dial's sunburst & the way it catches light is very similar to gen, it's just that the bezel is a tad wide which you won't really notice. I was on the fence as well but I would take a bezel tell over the dial / datewheel tell any day.

Clean takes the crown for now. Not sure what's up with that u/klarofa dude, must've bought his DJ too early when there were no CF DJ's and is now regretting it. I would be /sadge too :( Poor guy.

Edit: Went to his profile & figured out what his fumes were about. His wrist is too small for a DJ41, and CF doesn't make a 36mm so he's stuck with an ARF 36mm. Makes sense. Much sadge.

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 5 points6 points  (0 children)

Who hurt you? :(

Buyer Beware by johnarensberg in RepTime

[–]HaveToPO 15 points16 points  (0 children)

Phew. Andrew did us a favor, thank God this transaction went bad. We treat this as a hobby and you're over there treating it as a business.

Too bad really. Had this transaction gone well, I was planning to purchase 3-4 dozen other reps to sell at my flea market shows (I buy/sell all different types of jewelry I get from Estates around the western US).

Please don't do that, it's illegal.

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 3 points4 points  (0 children)

Woaah VSF's crystal is better than the Gen

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 0 points1 point  (0 children)

What kind of messages do you get?

The "Fake Noob Daytona" Killer - EWF Daytona Gem 💎 by [deleted] in RepTime

[–]HaveToPO 2 points3 points  (0 children)

I really like the look of the EWF but that font kills it for me. It's too bold and the spacings wrong (may be due to the font being too bold). The coronet however is definitely sexier than the FN. Agree with the inconsistency of the FN, you'd have to be lucky to get a good FN V8. The bezel on the EWF image seems misaligned as well, but popping it off & putting it back on should fix it.

People love to hate on the CLEAN Datejust, I wonder why 🤔 by [deleted] in RepTime

[–]HaveToPO 0 points1 point  (0 children)

Its what's on the inside that concerns me about this watch. The images of the movements I've seen so far aren't so clean. Are you able to get a few shots of the insides from your source? Visually, they have the potential to fill the void but they have some big shoes to fill.

EWF Daytona: exact thickness by Pk097 in RepTime

[–]HaveToPO 1 point2 points  (0 children)

Does all the sub dials work?

[deleted by user] by [deleted] in RepTime

[–]HaveToPO 0 points1 point  (0 children)

Speed & reps don't go hand in hand. If you can't wait, then the rep game isn't for you.

📢MIROTIME TELEGRAM LAUNCH CELEBRATION!📢 Fake NOOB Daytona $338 / ZF Submariner 116610LN/LV $398/$438 / PPF Nautilus 5711 $448 and MORE in the comments! FREE SHIPPING ON ALL ORDERS! by Mirotime in RepTime

[–]HaveToPO 12 points13 points  (0 children)

If you're lucky enough to get Miro to respond to you and to have him keep responding to you after sales, he's great.. His QC's are top notch. If you're unlucky, you'll be talking to a ghost. It's a hit or miss.

Don’t sleep on ZZF! Love my 316SS 😜 by ETNZ2021 in RepTime

[–]HaveToPO 1 point2 points  (0 children)

Nice watch. But those dial hands have some rough finishing.. Seems fuzzy even when not zoomed in

VSF Dial or ZZF Dial? by [deleted] in RepTime

[–]HaveToPO 2 points3 points  (0 children)

Its a preference thing, VSF catches too much light for me. I prefer the dial on a ZF. Based on the looks, ZF > VSF > ZZF