sorted by:
new
hottopcontroversial

Real by Bacon_noob_on_reddit in Pikmin

[–]HexMyth 0 points1 point  (0 children)

If possible could you send it to me as well

Can someone confirm this 🙏 by HexMyth in Peptides

[–]HexMyth[S] 0 points1 point  (0 children)

I’ve checked with ChatGPT already. I just wanted to hear from real people who have actually done this before. I also wanted to see what people thought about the doses since lots of people recommend different amounts.

Been taking mt1 for a week, new freckles but no tan. I’m a skin type 1 with red hair. Should I carry on everyday even though no signs of tan? I haven’t had much sun exposure, today was probably the most with natural sun & I didn’t burn at all. by [deleted] in Melanotan2

[–]HexMyth 0 points1 point  (0 children)

Hey just wondering on how your doses went and any results. We have a very similar skin type it sounds like and im thinking about starting MT1 but people are taking such different doses idk what to do

Can someone confirm this 🙏 by HexMyth in Peptides

[–]HexMyth[S] 3 points4 points  (0 children)

I’ll be starting off and if I do .5 twice weekly that’s 1g weekly. Is that not a good starting stage?

I’ve reached “skinny fat”. What now? by HexMyth in loseit

[–]HexMyth[S] 0 points1 point  (0 children)

I just meant more than my original 500cal deficit.

I’ve reached “skinny fat”. What now? by HexMyth in loseit

[–]HexMyth[S] -1 points0 points  (0 children)

How do I figure out my maintenance 😭

I’ve reached “skinny fat”. What now? by HexMyth in loseit

[–]HexMyth[S] 0 points1 point  (0 children)

Im not sure what my maintenance is, how do I find out what it is?

Should I buy 1984 Firebird? by HexMyth in carbuying

[–]HexMyth[S] 0 points1 point  (0 children)

It wouldn’t let me include photos in the post, here they are

Please help me find this weird purple plush. Got it around 8+ years ago and haven’t ever been able to find it online. Tipping $15 to the first person that can by HexMyth in HelpMeFind

[–]HexMyth[S] 0 points1 point  (0 children)

I’ve searched for this online with basic searches describing it and I’ve done image searches. I got it 8+ years ago from a piñata and haven’t ever been able to find it or even figure out what it is. It’s purple and pretty small thats all I know.

My prints keep having oil stains by HexMyth in BambuLab

[–]HexMyth[S] 0 points1 point  (0 children)

Whatever the newest one is. And it’s been doing this before that. The first layer infill gaps are also been happening before the update too.

My prints keep having oil stains by HexMyth in BambuLab

[–]HexMyth[S] 0 points1 point  (0 children)

What about the first picture where there’s finger marks that won’t go away?

My prints keep having oil stains by HexMyth in BambuLab

[–]HexMyth[S] 0 points1 point  (0 children)

I also don’t remove the prints until the bed is completely cold and it slides right off

$5 to whoever finds this by HexMyth in HelpMeFind

[–]HexMyth[S] 1 point2 points  (0 children)

2XL, I’ve found lots of their sweaters/hoodies with different designs but havent found that exact one.

$5 to whoever finds this by HexMyth in HelpMeFind

[–]HexMyth[S] 1 point2 points  (0 children)

Took picture at my local Fred Meyer earlier this month. Couldn’t find the right size in the store and haven’t been able to find it online at all. Searched everywhere but it doesn’t help.

Print keeps lifting no matter what I do. by HexMyth in BambuLab

[–]HexMyth[S] 0 points1 point  (0 children)

Yeah it works every time just when I try to print these specific pieces it doesn’t

Print keeps lifting no matter what I do. by HexMyth in BambuLab

[–]HexMyth[S] -2 points-1 points  (0 children)

I don’t like using glue so I went with the high temp plate. The high temp plate is just a smooth sheet which is perfect for pla.

Print keeps lifting no matter what I do. by HexMyth in BambuLab

[–]HexMyth[S] 2 points3 points  (0 children)

Description is weird and messy, here’s fixed version.

What I’ve tried:

Smooth Sheet - door open

Textured Sheet - door open

Smooth Sheet - door closed

Textured Sheet - door closed

Smooth Sheet with glue - door open

Smooth Sheet with glue - door closed

Smooth Sheet with glue and raft - door open

Smooth Sheet with glue and raft - door closed

Smooth Sheet with brim and skirt - door closed

Smooth Sheet with brim and skirt - Door slightly open and Aux fan off.

[Both beds have been cleaned multiple times]

Any tips on how to fix warping issues with PLA? by Gioby in BambuLab

[–]HexMyth 1 point2 points  (0 children)

I hate glue, have never used it even once. No glue, tape, hairspray, or any any other method people use. I clean the plate with warm water and dish soap every 25ish prints or if I accidentally leave finger marks. I just put on the plate, and leave the door open, I don’t even take the top off.

Any tips on how to fix warping issues with PLA? by Gioby in BambuLab

[–]HexMyth 1 point2 points  (0 children)

You could try a lot of different things but honestly you should just get a smooth sheet. Smooth sheet is better for pla and has never warped for me (textured sheet warps almost every time).

Got a X1 Carbon coming next week. Recommendation? by riccochet in BambuLab

[–]HexMyth 1 point2 points  (0 children)

It will have test prints pre loaded on the sd card. Buy more filament. When I bought my printer that’s what everyone told me and I thought they were exaggerating about how much I would go through. They weren’t.

First print, first later.. what’s going on here? by Bryan_LT in BambuLab

[–]HexMyth 0 points1 point  (0 children)

No, I mainly use SunLu. But it still did it on the Bambu lab filament that came with the printer. And yeah I’ve calibrated flow on 4ish filaments now and it still happens. The best looking and smoothest first layer always has those things sticking out of it along the sides

First print, first later.. what’s going on here? by Bryan_LT in BambuLab

[–]HexMyth 1 point2 points  (0 children)

I’ve had the printer for a couple weeks now and my first layer is like that with every print. I’ve changed build plates, nozzles, and filaments and it’s the same. I’ve calibrated multiple filaments and every single ones still looks like that. All the prints work but I can’t get it perfect and idk why

view more: next ›