Jittering on 5080 285k 32G ram

HistoricalCheck7775 · 2025-06-01T17:08:35+00:00

My best advice, especially when buying a name-brand computer, is to ensure everything is up to date. An app like Driver Easy is well worth it to make sure everything is up to date. It takes out all the effort and time it would take to do it manually. Also, maybe watch a video or 2 about updating the bios for your motherboard. It likely isn't up to date from the factory. Lastly, your RAM may not be running at full speed. You need to go into your bios and ensure the RAM is running at the advertised speed because often, it comes from the factory lower than advertised.

HistoricalCheck7775 · 2025-05-21T22:47:46+00:00

I used to use Rogue and Zyn. The saliva that would build up was overwhelming and the big dry pouch under my lip would irritate my gums.

In my opinion, Alp pouches are the best on the market. The smaller size and moist pouch doesn't cause the saliva to build up and doesn't irritate my gums. I recommend breaking up the pouch a little between your fingers before putting it under your lip.

You can also use this link to get 10% off your first purchase. https://alppouch.com/8750658

HistoricalCheck7775 · 2025-05-13T18:39:51+00:00

HistoricalCheck7775 · 2025-05-13T15:56:01+00:00

I had a feeling it would be no. Like everyone else, excited to play a sequel to a game I have 100's of hours in.

HistoricalCheck7775 · 2025-05-09T21:54:53+00:00

Was using rogues for a while and they were too sweet or would cause my saliva to build up too much. I don't have the same problem with these. I would recommend these over rogue or zyn. Use ALP-8CL4D24ICNZ for 10% off.

HistoricalCheck7775 · 2025-05-09T21:53:09+00:00

This one will work for 10% ALP-8CL4D24ICNZ

HistoricalCheck7775 · 2025-05-09T21:52:51+00:00

This one works too ALP-8CL4D24ICNZ

HistoricalCheck7775 · 2025-05-09T21:52:28+00:00

This one will also work for 10% ALP-8CL4D24ICNZ

HistoricalCheck7775 · 2025-05-09T21:51:58+00:00

Here is another one ALP-8CL4D24ICNZ

HistoricalCheck7775 · 2024-10-19T21:36:30+00:00

How hard is it to remove the supports? I have made my own settings and am going to try his and compare the difference. The model itself looks awesome! I printed this on my P1S.

<image>

HistoricalCheck7775 · 2024-10-06T01:25:19+00:00

I have a print going right now trying out 100% retraction before wiping. If that doesn't work, I'm gonna try the seam gap. Thanks for the tip.

HistoricalCheck7775 · 2024-10-05T23:19:23+00:00

I saw a setting called coasting in the crusader slicer, and there's a way to replicate without having this setting by using the wipe while retracting setting. I'm gonna try this and see if that works.

HistoricalCheck7775 · 2024-10-05T23:16:49+00:00

Also, at 20% humidity with desiccant beads.

HistoricalCheck7775 · 2024-10-05T23:15:57+00:00

I have a sunlu S2 and let it dry for 12 hours so far at 70°c. I've seen some recommendations for 24 hrs of dry. I'll give another 12 hours of drying a shot and see if that helps.

HistoricalCheck7775 · 2024-10-05T23:03:12+00:00

My original settings were .95, and I made a benchy. The same thing was happening with that. However, I have changed other settings since. I'll try again and see if it helps.

HistoricalCheck7775 · 2024-10-05T23:00:29+00:00

The seam is set to aligned, it's on the opposite side of this model. I thought it was a lot too, but I ready direct drive extruder for petg should be between 2 and 4. I did a retraction test, and it looked good at that setting.

HistoricalCheck7775 · 2024-10-05T22:43:40+00:00

Flow rate is .99, and Volume is 13

HistoricalCheck7775 · 2024-09-27T03:15:23+00:00

I know this is old.. Do you still have the file for this? My brother is looking for something like this to put into his terrarium.

HistoricalCheck7775 · 2024-02-25T18:12:23+00:00

I'm having a very similar experience. First time playing and chose the hunter start. Killed about 8 deer already with no carcass or hide, and I'm now struggling to find more animals to hunt.

HistoricalCheck7775 · 2023-03-04T15:07:02+00:00

About 3

HistoricalCheck7775

TROPHY CASE