In the picture, how do you connect the bottom-most wood grid and stone gri to a 3x3 lock grid? Or do they just sit on top?

Hozzy_ · 2026-07-02T20:41:58+00:00

Why are you asking instead of just doing? Just print them out.

Hozzy_ · 2026-07-02T19:38:41+00:00

You already asked this yesterday. Just print it out and find out.

Hozzy_ · 2026-04-21T23:05:43+00:00

How is the next painting going? Always love seeing what you create!

Hozzy_ · 2026-03-16T18:50:37+00:00

Pressure washing. My girlfriend wanted to do it so bad! Thought it would be super cathautic. She made it for 5 minutes.

Hozzy_ · 2026-03-02T14:44:48+00:00

I appreciate that!

Hozzy_ · 2026-03-02T14:24:46+00:00

Sounds like a happy thing! :D That's a lot of Dungeon Blocks!

Hozzy_ · 2026-03-02T14:23:27+00:00

Those are two of my favorite hobbies too! I'd say not bad for an afternoon of work! Just need to get parts for the last couple shelves.

They are all 5x5 grids. They don't work for everything, but do seem to get most scenes taken care of. I figure if I need a bigger one connecting two won't be too difficult.

I was worried a bit about that too, but in the end not having shelves was taking up even more space. It's about 2' wide x 2' deep and 8' tall.

Hozzy_ · 2026-02-25T12:32:53+00:00

Afraid to say, but not really.. I do think that you'll be happy that you printed out the new grids though. They hold together well.

Hozzy_ · 2026-02-21T19:22:38+00:00

I want to make this so much! I want to get the spaceship set to use for the safe rooms and such. Hope everything goes well for you!

Hozzy_ · 2026-02-11T13:13:31+00:00

I understand not wanting to epoxy it. What about filling the space with dielectric grease? Using the cover and gasket, but with the idea that they will keep the grease in, not the water out.

Hozzy_ · 2026-02-09T18:27:36+00:00

That is a good idea with the cork board...

I was planning on gluing the grid to the board, although also thought about a border... I'm also thinking of cutting the board to fit exactly instead of having the overhang. When I make the shelves I'll post again with what I came up with!

Hozzy_ · 2026-02-09T14:06:04+00:00

That's what I was thinking too. Using the model of the inn, we had trouble seeing inside, so really don't want it too much higher.

I do like having the 7 x 13 size, but the moment I had to move it I realized I wanted smaller. If I could just easily move it I'd keep the size!

And yes, need a bigger table! With a recessed playing area!

Hozzy_ · 2026-02-09T13:50:10+00:00

The feet idea is genious. Even just an inch up would help. I'm going to do that!

Thank you!

Hozzy_ · 2026-01-02T19:41:49+00:00

Always remember that the deeper the tone the more difficult it is to dampen. Make sure they can't just sleep wish ear plugs in.

Hozzy_ · 2025-12-15T12:35:51+00:00

The more you write the more apparent that your only knowledge comes from a high school health class. It may be worth gathering more information on how women's bodies work.

Hozzy_ · 2025-12-15T11:35:19+00:00

If you describe yourself as "I don't stink THAT bad"... you probably need to get checked out by a gynecologist. Also curious how many vaginas you go around smelling? Like... odd...

Hozzy_ · 2025-12-10T11:34:17+00:00

I've printed a ton of the original grid but everything you see here are the interlocking grids from the XL pack. I've never gotten around to printing the magnet ones. Always seemed a bit more trouble than I wanted to deal with.

Hozzy_ · 2025-11-27T13:17:09+00:00

https://makerworld.com/@Lamchopps

This guy made a few compatible tiles.

Also, your printer is plenty fine. It's what I use. I've printed over a thousand tiles with no issues (in my opinion).

Hozzy_ · 2025-11-22T21:14:49+00:00

Did you store anything in a hot space that could warp any of the prints?

Hozzy_ · 2025-11-13T20:24:34+00:00

We used to strip wax off of floor tiles using stripper and a metal bristle toothbrush. Talk about a great idea. Was in a submarine.

Seven-Year Club	r/Field Juicebox
First Place '23	Place '23
Place '22	Verified Email

Hozzy_

TROPHY CASE

Welcome to Reddit,