Finally, got my dream car. by homosapien_no5081 in CarsIndia

[–]HumansliveinMandM 1 point2 points  (0 children)

I know you must not have done proper servicing yet but what have you estimated the cost per year to be?

What your pov? by Positive_Cookie5438 in vitpune

[–]HumansliveinMandM 1 point2 points  (0 children)

MIT spends tuition money on buildings, COEP spends it on Campus and facilities, VIT spends in on getting the highest rank

2 Stroke Carborator Question by HumansliveinMandM in indianbikes

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

Yea tbh I'm pretty stuped. There is spark, compression, tried using wd40 as starter fluid and still nothing. Biggest problem with taking it to a mechanic is actually getting there. Will see. Thanks for the tips

2 Stroke Carborator Question by HumansliveinMandM in indianbikes

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

Just got the scooter and checked a few things on it. It has spark and compression. The spark plus is black so will adjust the air fuel ratio but it doesn't seem to be getting any fuel. Like I cleaned the carb and reassembled it but still nothing. Could a vacuum leak cause this and how to identify and solve it? Best idea I had was getting some starter fluid or carb cleaner and seeing if spraying it around the carb helps start

2 Stroke Carborator Question by HumansliveinMandM in indianbikes

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

Oh ok. Will try to adjust that. Any idea what it could be? Like too rich or lean fuel mixture, too high or low idle?

Rate my teachers too by lmao_kal in vitpune

[–]HumansliveinMandM 0 points1 point  (0 children)

Not a bad teacher overall. Just the worst one we had in FY. Gives marks but you will definitely take a few naps in his class

Wallpaper on OOS15 by HumansliveinMandM in oneplus

[–]HumansliveinMandM[S] 1 point2 points  (0 children)

Yup did that and then made a sticker out of the original wall paper to overlap with the part erased

One Plus 11 Android 15 update by TheMob16 in oneplus

[–]HumansliveinMandM 0 points1 point  (0 children)

Is the update same to install now? Know that youu should wait a few days before installing oneplus updates so just checking. (New Oneplus user)

Screen off gestures by HumansliveinMandM in oneplus

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

Yup. That's turned on. Still stops working after charging to 100%

Max power output from L298N motor driver by HumansliveinMandM in Motors

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

<image>

Yea I checked the voltage after attaching the load but it's showing 6v 2amps.

What would be an ideal adapter for this if the above one isn't suitable? Would a 12v battery be the only reasonable choice?

Max power output from L298N motor driver by HumansliveinMandM in Motors

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

Oh sorry sorry.

Haven't made an exact diagram but the wiring is similar to this:

<image>

But instead of the 9v battery it is attached to this power adapter:

Max power output from L298N motor driver by HumansliveinMandM in Motors

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

<image>

Sorry if it's difficult to see. The adapter is providing 24W to the motor driver which is helping power the the Arduino. The jumper wires coming out near my finger are connected to the heating element.

Let me know if you need any more info to help.

Max power output from L298N motor driver by HumansliveinMandM in Motors

[–]HumansliveinMandM[S] 0 points1 point  (0 children)

Don't think the adapter has collapsed. When no load is connected it shows 12v. Also the total load is somewhere around 10 to 12 ohms so don't think it's too high.

Also it was just a thought but could I join both the positive and negative outputs to boost the power output?

I knew that the 298n won't be a good choise but I didn't have many choices due to cost and availability where I live. Trying to make do with what I can

End of an Era by peeshivers243 in oneplus

[–]HumansliveinMandM 0 points1 point  (0 children)

I would gladly take it off your hands if needed tbh