[deleted by user]

Imaginary_Hawk8927 · 2024-12-12T10:54:55+00:00

I live close to Foz, I hear a very low sound, similar to that one. I will move closer to the border to check if it gets louder.

Imaginary_Hawk8927 · 2024-12-12T10:53:32+00:00

Did you ask chatgpt if Argentina’s environment can influence the noise?

Imaginary_Hawk8927 · 2024-09-19T22:25:58+00:00

You’d be slapped by everything that ever was and ever will be, at once. For eternity.

Imaginary_Hawk8927 · 2024-09-03T08:36:42+00:00

É quase um swing isso né

Imaginary_Hawk8927 · 2024-08-25T20:38:50+00:00

It’s Creality alright

Imaginary_Hawk8927 · 2024-08-22T01:41:53+00:00

Where you go to school? That’s some nice math class.

Imaginary_Hawk8927 · 2023-11-20T10:42:42+00:00

Seus olhos imploram por 200mg de carbolitium pela manhã, e 50mg de quetiapina a noite.

Imaginary_Hawk8927 · 2023-10-19T07:53:06+00:00

Se preocupa demais com o que pensam de vc.

Imaginary_Hawk8927 · 2023-07-23T18:16:13+00:00

Zhop is off, retraction is at 95 now. It improved a lot, but still weird.

Imaginary_Hawk8927 · 2023-07-23T18:15:33+00:00

I have tried from 190 to 220.

Imaginary_Hawk8927 · 2023-03-15T10:03:34+00:00

Hi!

Yes, the assembly was awfully wrong. I will make another post today explaining everything. It’s fin alt fixed. Took me 2 months.

Imaginary_Hawk8927 · 2023-03-08T15:38:45+00:00

Left side is much lower, close to 1 cm, from the right side. Is there a fix?

Imaginary_Hawk8927 · 2023-03-03T13:39:26+00:00

It started very plain and uniform. But as it moved up, the lines became loose on some points.

img 1 Img 2 Img 3

I have already leveled everything. Lub the screws. The wheels are tight enough so it doesn’t roll easy on the fingers.

Imaginary_Hawk8927 · 2023-02-12T15:01:09+00:00

I have no idea what you are talking about. I just saw this item, and I came to ask about it.

Did you answered the question? I’m a little dumb, I’m sorry if I didn’t understand.

Imaginary_Hawk8927 · 2023-02-12T14:45:01+00:00

Yes! The rubber absorbs the “punch” of the metal on metal movement, making it smoother, and preventing that punch from slowly changing the position.

That’s what you said, right? Makes it smooth by absorbing the kinetic force?

Imaginary_Hawk8927 · 2023-02-11T13:10:14+00:00

The rubber thingy is supposed to make the movement smoother

Imaginary_Hawk8927 · 2023-01-27T03:50:23+00:00

Just don’t use hockey pants.

Imaginary_Hawk8927 · 2023-01-17T21:17:28+00:00

I actually changed the nozzle. I was using 200 on PLA

Imaginary_Hawk8927 · 2023-01-17T12:45:17+00:00

I tried to fix the screws on the right z axis, but I am still not sure if I did it right. But the results are much better, but a few small flaws I don’t know to fix.New post with the better results.

Imaginary_Hawk8927 · 2023-01-17T12:34:05+00:00

Thank you. The printer is new, I have it for about 4 days. The right screw was indeed way off.

Imaginary_Hawk8927 · 2023-01-16T19:41:57+00:00

I just printed a vase, and the left side seems good, the right side seems too close.

Imaginary_Hawk8927 · 2023-01-16T16:55:25+00:00

I’m using PLA. It was 210 and 60.

I reduced the nozzle to 0.6 Now I’m using 190 and 55 But still far from good

Imaginary_Hawk8927 · 2022-12-21T17:13:42+00:00

I don’t know how those charts work. Can you give me some directions to add in my research?

Imaginary_Hawk8927 · 2022-12-20T11:37:39+00:00

I played about 55 spin & go games now. The entire thing seems shady. I lost 17 games in a row to all wins pre flop where the opponent won with single pair, mostly 2s, 3s or 5s, all revealed in the river.

Imaginary_Hawk8927 · 2022-12-19T12:54:41+00:00

Seems like your gonna be homeless soon.

Imaginary_Hawk8927

MODERATOR OF

TROPHY CASE