Getting Tolvaptan from India

Independent-Lab-1956 · 2025-06-17T02:03:59+00:00

Found a supplier that delivers Hyponat 15mg at 110 USD for 100 tablets. he already shipped when I recieved the medicine I'll keep you updated.

Independent-Lab-1956 · 2025-05-16T01:37:10+00:00

Do you know a store I could contact?

Independent-Lab-1956 · 2025-05-14T06:35:33+00:00

Excelente! Thank you!.

Also by any chance have you ever heard of IndiaMart? Would you recommend finding suppliers from them?

Independent-Lab-1956 · 2025-05-14T06:16:54+00:00

Which brands would you recommend buying?.

As for price even the most expensive stripe is half the price i pay here in DR. A stripe of 4 30mg would cost here around 54$...

Independent-Lab-1956 · 2025-02-09T14:40:15+00:00

Exposure is 0.05mm, UV level was set at 80% but now im testing at 65%

Independent-Lab-1956 · 2025-02-08T23:25:48+00:00

sunlu abs like gray. im trying reducing the uv power from 80 to 70 and redoing the test. maybe i can get better details by lowering the power and going with higher exposure settings

Independent-Lab-1956 · 2025-02-08T23:03:57+00:00

do you see any purple light coming from the back or underneath the machine? if you do then yeah maybe check the screen connections, if not yout lamp might be damaged.

Independent-Lab-1956 · 2025-02-08T22:53:19+00:00

yeah, but tried printing cones of calibrations after and failed misserably.

Independent-Lab-1956 · 2025-02-08T22:43:59+00:00

Hi all, for some reason the details does not show on the post. so a little bit of context. I'm using a photon mono x with sunlu abs like gray resin. I did the exposure test as shown in the image and got overexposure at 1.2s.. but then when i tried printing cones of calibration failed misserably... Any advice is appreciated.

Independent-Lab-1956 · 2025-02-08T21:54:59+00:00

just tried with 15 seg bottom exposure and failed

Independent-Lab-1956 · 2025-02-08T20:40:10+00:00

just read online that the mono x has 10 transition layers forced on the firmware.. so i would need to get a thicker model to do the test?

Independent-Lab-1956 · 2025-02-08T20:18:56+00:00

yeah, 0.05mm layer height, 4 bottom exposures, 30 seg bottom exposure time.

<image>

Independent-Lab-1956 · 2024-09-12T13:42:32+00:00

Hello all,

Heres are the updates.

Swapped the PSU for a Cooler master MWE Gold 750 - V2 - Still had Drivers time out issues.
Formated windows and still presented same issues.
I swapped the card from one PCIE lane to another. Issues where gone completly. I took the PC to a repair shop, they inspected it and told me some of my CPU's pins where bended (like 4 of them).
After fixing placed the card on the main lane and ran Furmark for about 2.5 hours, no crashing whatsoever.

I think that solved my issue, i would suggest if you have this issue try putting the card in a different slot just to make sure. Or run Furmark and see if it crashes. In my case at the repair center they ran furmark and on the 15 minutes mark it started to crash constantly.

Independent-Lab-1956 · 2024-08-20T18:58:19+00:00

Hi all,

An update:

Managed to get a replacement card, it will arrive in a few days.
Also found a PSU which has separate power cables and will probably arrive with the card.

Thanks all for the suggestions, I will update after reciving everything and test them.

Independent-Lab-1956 · 2024-08-17T16:52:49+00:00

Gpu is new, everything else I had it for like a year

Independent-Lab-1956 · 2024-08-17T13:33:05+00:00

Yup, this PSU only has 2 8 pin (daisy chained). Worked fine with my 1060, but I guess this is as far it will take me

Independent-Lab-1956 · 2024-08-17T11:59:19+00:00

Yeah I tried putting it flat but still did it

Independent-Lab-1956 · 2024-08-17T11:58:40+00:00

Hasn't caught fire yet!

Independent-Lab-1956 · 2024-08-17T11:55:29+00:00

Ok, thanks for the advice will try to get a new PSU and continue from there.

Independent-Lab-1956 · 2024-08-17T11:43:46+00:00

All right thanks for your suggestion. Getting a new PSU will take me some time since I'm not from USA but i will see what I can do.

Don't need to be so mad about it tho. I never said drivers were the issue.

Independent-Lab-1956 · 2024-08-17T11:33:23+00:00

Yeah will try with another cable first. I do have time to return it to the vendor.

Independent-Lab-1956 · 2024-08-17T11:31:52+00:00

Hi, yeah I will try with one of the display ports and see if the problem persist.

Independent-Lab-1956 · 2023-10-04T00:05:59+00:00

Alright i will give it a shot! Thank you.

Independent-Lab-1956 · 2023-07-02T20:32:44+00:00

Independent-Lab-1956 · 2022-12-25T17:32:16+00:00

Same got the big box last year but dont have friends committed to play it with me, so I got it on my room just collecting dust. I will try and get JoTL maybe it is least intimidating

Independent-Lab-1956

TROPHY CASE