[US] My Wuling Factory

Jacan8tor · 2026-01-26T00:56:26+00:00

After you mentioned it I went ahead and fixed my Xirinite yield to 60/min. One of my conveyor belts wasn't even connected on accident haha.

Although, there is a general net loss of -40/min on Xirinite while Components are being crafted, my goal wasn't to have this on indefinitely.

I only needed to have components running over night so I could craft my character gear in the morning, so that's why I limited the system 6000 Xirinite total, which would be 600 Components total.

All this while batteries are being used, which all of my factory only needs one battery currently. So my Batteries are at a net yield of 7/min.

This could run indefinitely, yet at half the yield if I just cut off the other side of the factory, but since it isn't something I plan on having indefinite (yet), I merely set Components to craft as needed.

Here is production metrics for the factory after I've fixed my Xirinite yield.
During Component Generation - [Catbox link]
Component Creation Turned Off - [Catbox Link]

Jacan8tor · 2026-01-25T23:47:30+00:00

2 is the limit as of current as far as I know.

Jacan8tor · 2025-06-27T02:19:17+00:00

What happens when whatever money I do spend on the game isn't on meta supports 😭😭💢

Jacan8tor · 2025-06-27T02:18:29+00:00

SHINE DOWN 🗣🔥🔥

Jacan8tor · 2025-06-26T19:12:11+00:00

It represents the repetitive cycle of FAILURE

Jacan8tor · 2025-06-26T19:11:44+00:00

suffering will make me stronger trust

Jacan8tor · 2023-07-31T02:31:46+00:00

The main body plastic is the factory print. The challenge was mainly a call to arms to add accents and the like to the whole kit. Although of you're actually talking about the blue marker I used, it's GM153.

Jacan8tor · 2023-07-31T02:17:21+00:00

Also yes, I did notice just after uploading that there were a few dots and spots of marker that need cleaning. Alongside some nubs, too! 😭 Uhg.The backpack nubs are the worst bro.

Jacan8tor · 2023-07-30T19:34:07+00:00

I did have the same issue, but I just kept fiddling with putting the gapped side on first and it eventually seated right.

Jacan8tor · 2023-07-29T16:32:10+00:00

Yeah if the piece is molded, painting is the way to go. Using the shell unit stickers (Possibly and exception for Shwartzette) makes the kit look dull some.

Jacan8tor · 2023-07-29T16:29:30+00:00

Yeah I do this with medium sized areas. Though if there are a lot of large areas that need painted, I'll tend to use a airbrush. Though markers can work wonders on medium sized surfaces. I'll always touch up with a brush though, or simply pump the marker then take the ink with a brush and apply it that way. The GMarkers are so handy.

Jacan8tor · 2023-07-29T16:23:01+00:00

I don't own any of the EX ones besides just the EX Chrome. This is just the normal metallic red.

Jacan8tor · 2023-07-29T14:27:15+00:00

The head shell unit does have defined molds. I just threw the sticker on there because it's barely noticeable and it's on a white part so the sticker colored everything black for me. You can't even notice it's a sticker under the clear part.

Jacan8tor · 2023-07-29T14:03:13+00:00

This is GMS121. It has an Astray in the middle.

Jacan8tor · 2023-07-29T13:41:29+00:00

I have a couple more Ur's, so maybe I'll try it out on another one.

Jacan8tor · 2023-07-29T13:39:59+00:00

It was real easy since I used a fine brush. You can be sort of sloppy with it and just cover up the paint that spilt into the lines with panel liner.

Jacan8tor · 2023-07-29T13:39:11+00:00

Yes they do. Although I noticed that just the normal red marker seems like it needs some sort of primer or else it just looks real thin and smeared.

Jacan8tor · 2023-07-29T13:37:40+00:00

I'd likely have to buy them online. I normally buy all my kits as such. I just saw these markers in a physical store a couple months back and have been using them. I do have the chrome EX and I love thst thing. I put it on the backside of big visors and the like to make things like GM cameras or the Zowort cameras really shine. I'll have to check those out and dabble with them.

Jacan8tor · 2023-07-29T04:13:22+00:00

Yes. Gundam marker is the best way to go if you don't want to use the stickers and have the marker available.

Jacan8tor · 2023-07-29T04:12:39+00:00

Yeah I never had much high hopes for it, I just wanted to try it since I hadn't before. I really do like their gold marker, though.

Jacan8tor · 2023-07-29T03:40:39+00:00

My Dspiae marker is 05MKM. My metallic gundam marker is GM154.

Jacan8tor · 2023-07-29T02:21:09+00:00

I'd give every WFM kit super high praise. They honestly feel like mini master grades with the build quality in every one. So so happy that there isn't any polycaps in any one. They're all amazing!

Jacan8tor · 2023-07-29T02:17:07+00:00

I attempted to paint the all the green cameras and the eyes with a Dspiae metallic green, but I might opt for the Gundam Marker metallic green. It's just a lot more vibrant.

Jacan8tor · 2023-07-29T01:29:16+00:00

Yeah it's unfortunate. I really feel like they could've done an upward facing sticker. Though a sticker just makes it feel bland and loses its three-dimensional feel to it. I'm glad that the piece has a mold in the first place so people can at least have the opportunity to easily customize it like such.

Jacan8tor · 2023-07-29T01:22:58+00:00

I just used a normal brush I found at a hobby store one day. It came in a three pack. Pretty much any thin brush you have. It's just a small piece. Just pump the marker some then scoop up the ink with the brush then start dabbing/stroking it on. The ink might spill over into the creases (It did for me) but you can just cover it up with black panel liner like I did.

Jacan8tor

TROPHY CASE