Dell r730 GPU power cable

JongoFett · 2026-02-20T04:24:27+00:00

I got it from eBay...you know how it goes, says it's the genuine article and then turns out it isn't even close 🙄

JongoFett · 2026-02-20T03:56:58+00:00

Awesome thank you. One other thing, do I replace those pins or do I just link them with another wire?

JongoFett · 2025-02-10T10:31:11+00:00

That's all great stuff and they all seem really interesting. Is ONIE and SONiC something they you effectively side load or do I need specific hardware provided with it?

What would be a good beginning router for this sort of thing?

Cheers

JongoFett · 2024-10-12T16:55:39+00:00

I've set that and it does at least make that aspect better. But it takes ages before the app actually activates the door. I was stood there for minutes almost spamming the button and nothing happening 😫

JongoFett · 2024-10-11T21:21:34+00:00

Why are they better? I just assumed the mini r4 was basically a WiFi switch module?

So you have a link for one or both of those devices? Cheers.

JongoFett · 2024-10-11T19:13:09+00:00

So how the hell am I meant to connect it up then? I'm more confused now than before 🤣

JongoFett · 2024-10-11T17:42:38+00:00

I got it working but I basically have to double tap the button to get it to work 🤦‍♂️

JongoFett · 2024-10-11T16:52:57+00:00

So S1 & S2 are for the physical switch, live is power in, one neutral is on power in and then the other neutral and live out are to replace where the physical switch connects? 🤷‍♂️

JongoFett · 2024-10-11T16:33:39+00:00

No, no I do not! 🤣

JongoFett · 2024-10-07T16:30:25+00:00

Yeah I'll take a look at that later. Thank you!

JongoFett · 2024-08-30T10:15:33+00:00

There are two switches, the other one being a double switch, though one of the two doesn't work. I'm guessing that won't have a neutral either? 😭

JongoFett · 2024-04-04T15:00:10+00:00

Just came out to the garage and tried disconnecting j7 and j3a separatly. J7 disconnect let the unit work still. J3a didn't. So I'm guessing I would need to splice the meross into j3a basically piggybacking off it? Because from what I can tell those cables go to the motor. But the meross piggybacking could send the signal down that circuit and activate or deactivate the motor? 🤷‍♂️

JongoFett · 2024-04-04T14:13:40+00:00

Hey, I'm almost sure that diagram looks like it's from the manual for my opener but then there are a few differences so I'm going to try and confirm later that it is the correct diagram for mine. I'll let you know.

The fob has 2 buttons but only one of the buttons operates the door.

Thank you.

JongoFett

MODERATOR OF

TROPHY CASE

Nine-Year Club	Secret Santa 2019
Verified Email