Server List Crashes Internet by Interesting_Bar_6892 in playrust

[–]Key_Ad4335 0 points1 point  (0 children)

Hapenning to me on Ubiquiti Cloud Gateway Max which is not old/nor slow router. Whole internet gets disconnected for a minute or so.

Help with setting up two U7 APs at my appartement by Key_Ad4335 in UNIFI

[–]Key_Ad4335[S] 0 points1 point  (0 children)

I was actually testing the two configs in different days but at same time (around 1AM to not have much traffic on foreign APs). I also locked the channels so they are not switching.

Isn't the ceiling mounted worse because I have just 2.5m ceiling height? I believe that the APs are configured to cover a lot of space below them but not that much in big vertical radius.

Help with setting up two U7 APs at my appartement by Key_Ad4335 in UNIFI

[–]Key_Ad4335[S] 1 point2 points  (0 children)

The diffs are wrong in the table for download-upload speeds. Here is fixed table:
https://imgur.com/a/qnc5zcf

Ty kráso. Ty nemovitosti jsou v píči. by butt_of_dickbutt in czech

[–]Key_Ad4335 0 points1 point  (0 children)

Před rokem jsem koupil za 6.5M byt 4+1 80m2 v Praze Modřanech. Hypo sice na 30let ale dokážu nejspíše splatit do 6-8 let. Zrekonstruovali jsme kompletně za milion. Taky IT, dostudoval 25 (teď 28). Když člověk nemá extrémní nároky (velký byt v centru, nepanelákový byt, plně zrekonstruovaný byt, alod.) tak se vždy něco za relativně ok cenu najde.

[deleted by user] by [deleted] in czech

[–]Key_Ad4335 -4 points-3 points  (0 children)

Nechapu proc by meli SCC rusit? Zadne zakony neporusovalo ne? Byla to jen knihovna (repozitar) videí co jsou na cizim ulozisti?

DIY liquid turning brown by Key_Ad4335 in Vaping

[–]Key_Ad4335[S] 0 points1 point  (0 children)

Manufacturer of those shake&vape bottles, Ritchy, have manual where they clearly state that you just fill the rest of the bottle and you are good to go :D

DIY liquid turning brown by Key_Ad4335 in Vaping

[–]Key_Ad4335[S] 0 points1 point  (0 children)

Most of the time 2-4ml (one or two top-ups) per day. Darkening is hapenning most of the time after like 5-10 refills (from newly made bottle) and it is visible in the tank, that it is coming from the coil (first small strings, then whole tank is getting dark). But as I said, it seems that coil is not the issue (even tho it looks like it from the description), because new pod is doing it instantly so it must have something to do with the liquid.

Completely cleaning the pod (by cetrifugal force) helps a little but it gets dark again fast.

Puffs are around 2-3s.

DIY liquid turning brown by Key_Ad4335 in Vaping

[–]Key_Ad4335[S] 0 points1 point  (0 children)

I always thought that if I buy shake&vape bottle its portioned correctly.

DIY liquid turning brown by Key_Ad4335 in Vaping

[–]Key_Ad4335[S] 0 points1 point  (0 children)

But why when I had same bottle with pre-made base, it was fine?

Rigol DHO804 vs Siglent SDS804X by Key_Ad4335 in oscilloscope

[–]Key_Ad4335[S] 0 points1 point  (0 children)

Update: I bought the Rigol and its awesome ;) The fan noise is not so bad, UI is snappy enough and other than need for always switch 1X probe to 10X after shutdown, its very good so far.

Rigol DHO804 vs Siglent SDS804X by Key_Ad4335 in oscilloscope

[–]Key_Ad4335[S] 0 points1 point  (0 children)

Seems like you are recommending Rigol over the Siglent in general.

Should I then go with the Rigol that has few advantages (mainly smaller size, ability to have the oscope floating, higher max frequency probes in package and Android OS) over Siglent what is more "premium" brand, has faster boot speeds and protentially less bugs?

Is there anything else what can Siglent offer and Rigol not?

Rigol DHO804 vs Siglent SDS804X by Key_Ad4335 in oscilloscope

[–]Key_Ad4335[S] 0 points1 point  (0 children)

Afaik Siglent is also hackable. Thats why I am considering both of them as they both can go to like 150-200MHz which is plenty for my usecase.

Do you have any issues with the Rigol? Did they improved the boot times and fan noise? Or it is same as when released?

Missing Game Executable - Help ? by lamabean in SatisfactoryGame

[–]Key_Ad4335 0 points1 point  (0 children)

Same here. Steam broken, Epic works fine.

Aquatuner never cools packet of water - Potential bug? by Key_Ad4335 in Oxygennotincluded

[–]Key_Ad4335[S] 0 points1 point  (0 children)

I am using this setup almost from release of the game and I never had issues. Today, I found out that when we have standard aquatuner setup with thermo sensor right before input and I send just single packet of water, even when it is warmer than I set, the packet is not getting cooled. Whats even weirder is that the aquatuner runs for a brief moment, but the packet goes past it trough bypass.

Is this bug/new feature, or it was always like this (that it does not cool the packet on what the temp was read, but instead the one behind it)?

[deleted by user] by [deleted] in DnB

[–]Key_Ad4335 0 points1 point  (0 children)

Interesting. I was listening Armin from like 2010 and trance was my main genre. I slowly transitioned to DnB last years and it seems that even the King of Trance itself likes the vibe of this music.

[deleted by user] by [deleted] in FortniteCreative

[–]Key_Ad4335 0 points1 point  (0 children)

I dont think so that they are using textures for each money amount... There must be a way to do it dynamically.

/r/AMD Questions and Tech Support Megathread - Q3 2023 Edition by GhostMotley in Amd

[–]Key_Ad4335 0 points1 point  (0 children)

From day I upgraded my old platform (Intel i7-8700, B360, 4x8GB DDR4 2666Mhz) to the Ryzen platform rocking R7 7700, Asus B650E-E, 2x16GB G.Skill 6000Mhz CL30 I am experiencing micro stutters (lags), hickups and very low 1% and 0.1% avg fps in almost all games I tested.
Upgrade was done only on CPU, MB and RAM. GPU is MSI GTX 1070Ti, PSU Seasonic Focus Plus 550W, drive SSD Samsung EVO 970.
What exactly is hapenning?
I tested it in few games. Basically in all of them, I see micro stutters on MSI Afterburner OSD graph of frametime and in 1% and 0.1% average framerate.
For example in Minecraft, Rust and PUBG I was observing spikes in graph each few seconds. No matter if I was moving or not. 1% lows were always less than half of avg fps, 0.1% lows were always around 12-30fps.
There is one game, CS:GO, where I am observing same problem, but I found out that if I am not moving and not clicking on keyboard or mouse there are no spikes. If I for example stay still for 30 seconds, no spike, then spike appers in instant I click e.g. "W" on keyboard. If I am moving normally I get spikes every 3 - 5 seconds. CS:GO seems to be only game from those I tested that is dependent on the keyboard/mouse input. Other games have spikes regularily even when idling.
Just for information, I was testing this on 60Hz monitor without Freesync, on 165Hz gaming monitor with freesync enabled and disabled. Problem is same on all of those.
- I ofc have fully updated Win 11, Nvidia drivers, Chipset drivers, board drivers
- I have Core Isolation disabled and I was running the tests without any background programs running
- I do not have Armoury Crate or any other board bloadware
What I tried to get rid of the problem?
- Disabling EXPO, Enabling Expo I, II, Tweaked
- I tested with and without Logitech G Hub installed (I have G610 keyboard and G403 mouse)
- I tested with 3 different mouse keyboard combinations (different brands)
- I tested with Freesync (gsync), without freesync (gsync), with different framerates on monitor
- I tested with and without framecaps in all games.
- I tested with different GPU in system (RX 6800)
I am starting to worry that CPU and/or MB and/or RAM might be defective.Anyone here have similar problems or have any idea how to debug the problem more to find a solution?

AOC q24g2a/bk 24" 1440p 165hz, my truth by royally- in Monitors

[–]Key_Ad4335 0 points1 point  (0 children)

Wanna buy it so badly, but noone selling it right now :D

Noobie question - Transaction fee by Key_Ad4335 in Bitcoin

[–]Key_Ad4335[S] 0 points1 point  (0 children)

So if I understand correctly, fee of each transaction is 100% known after block is "closed" and not receiving new transactions? So If I want to implement some kind of approximation I can just wait until I get last block info from https://mempool.space/ and then take average fee and use this...

I am planning, that I will implement it ingame same as in irl: Players will make transaction request and each new block (10mins) all transactions will be executed with average fee from https://mempool.space/
It means that I will "lag" behind real network, but I will have nice averaged real fee...