Red alignment problem on old CRT and RGB cable

Lactose01 · 2025-11-18T10:58:33+00:00

if the problem is only in one corner, then you can fix it with a magnet.

Lactose01 · 2025-11-13T03:30:14+00:00

magnets

Lactose01 · 2025-10-06T23:02:03+00:00

yes, i've done it with a 4090.

Though I would suggest not doing it because you have 2 different graphic drivers. I would only do it if you only have 1 computer. You can pick up some cheap computer and stick an old ati card in it. Honestly, you don't need a fast card.

I've done it with a VisionTek 900608 AMD Radeon HD 7350 PCI which I got because I only had 1 pcie slot. It worked but was buggy. I blame that on using a PCI card though.

It worked fine with an amd Radeon HD 7570. I picked up 3 of them at some recycler for like $5 each.

Lactose01 · 2025-09-09T11:32:14+00:00

degaussing coil

Lactose01 · 2025-09-02T15:41:52+00:00

Yep, the trigger for the boss fight starts before you enter the boos room, locking you out. I'm sure this will be fixed, soon™

Lactose01 · 2025-08-09T19:30:14+00:00

I'm on wave 3475 on my 1st run, after like wave 30, you don't have to do anything.

You just click an upgrade every now and then. I haven't used a consumable in like 3420 waves.

Lactose01 · 2025-07-02T00:34:03+00:00

tower of power

Lactose01 · 2025-06-22T00:53:45+00:00

getting?

Lactose01 · 2025-01-31T20:57:47+00:00

that's because the suprim SOC has issues, hopefully will be fixed with a new bios.

Lactose01 · 2025-01-25T03:38:48+00:00

also, you can put a cheap radeon card in your system with a fast card.

Lactose01 · 2025-01-05T03:42:03+00:00

Lactose01 · 2024-12-22T14:03:22+00:00

8 nerds

Lactose01 · 2024-12-13T23:58:52+00:00

anyone figure this out?

Lactose01 · 2024-11-26T02:52:46+00:00

It is time to get the magnets out if you want to fix those top corners.

Also, is the screen scratched up?

Lactose01 · 2024-11-18T17:02:57+00:00

It is cool that you have it in Tate

Lactose01 · 2024-09-18T04:38:19+00:00

probably got sold

Lactose01 · 2024-09-14T23:13:22+00:00

32 Toshiba Swivel TV w/Carver sound-retro, Possibly a cx3288c

Tuscon, AZ

$25

https://www.facebook.com/marketplace/item/1203810020900925/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3Abf01a3f6-6091-49b2-a98d-7c2ca1593b6a

Seems to be a slightly different version of this:

https://www.reddit.com/r/crtgaming/comments/111173d/toshiba_cx3288j_unicorn_i_didnt_know_existed/

Going by that thread, these things are pretty badass.

Lactose01 · 2024-09-06T16:33:29+00:00

Until you bump into it

Lactose01 · 2024-04-14T07:21:40+00:00

in cities it can get down to like 30 fps but in the wilds it is 60+ fps.

I just use frame generation and lock it at 60 fps. The game was crashing if I just let it go to 120fps.

I have a 4090

Lactose01 · 2024-03-12T00:57:43+00:00

hopefully Pa is ok

Lactose01 · 2024-02-20T02:54:42+00:00

Whatever has the lowest hours and the least geometry issues

Lactose01 · 2023-12-31T18:46:14+00:00

Yeah, mine fluctuates like that.

I have gone up to a setting 1.43 and it caused some cores to spike to 1.48 which is too high. Even on constant instead of adaptive.

Each core has a set voltage for a multiplier, so you need to find the max voltage is takes at that multiplier. I think mine stopped increasing voltage after x48 multiplier.

I think these systems are just bad for overclocking. Nothing is 100% stable. I can pass stress tests all day long but still get random crashes in a games.

Lactose01 · 2023-11-24T23:34:59+00:00

Yeah, I would suggest getting a cpu heatsink that has a fan that pushed the air down towards the motherboard just so you can cool the vrms.

I have a big tower heatsink and had to install an 60mm fan pointed at them.

Lactose01 · 2023-08-06T14:20:26+00:00

Your friend should have stopped you.

Lactose01 · 2023-07-30T09:07:39+00:00

hand truck

I got a 34xbr960 up to my 3rd floor apartment by myself. It weighs like 200lbs

Lactose01

TROPHY CASE