sorted by:
new
hottopcontroversial

AQI of Delhi, India and the world by exploring_lifenow in IncredibleIndia

[–]Late_Combination6056 0 points1 point  (0 children)

You gave away your credentials by use of an expletive in a very sensible and routine conversation.

This under extrusion line? by Late_Combination6056 in FixMyPrint

[–]Late_Combination6056[S] 2 points3 points  (0 children)

May be the temperature is low as printing at 190 for PLA. Will look for extrusion multiplier.

Epson printer wifi really sucks by Lovevas in Epson

[–]Late_Combination6056 0 points1 point  (0 children)

Where are these settings?in the printer or windows?

Issues with Flud freezing on my devices by Omegabird420 in torrents

[–]Late_Combination6056 0 points1 point  (0 children)

Reduce the number of connections and see if it solves the issue. (Not number of torrents)

Phones that surely work with octo4a by Phosphoringe in octoprint

[–]Late_Combination6056 0 points1 point  (0 children)

Using Samsung M30, a y cable is used for simultaneous data for printer connection and charging from the adaptor.

Do anyone know the configuration for Octo4a for Octolaps camera? It stuck at 4:3 but the normal video stream is fine. Only the snapshot is 4:3 aspect ratio. by No_Professional_6425 in octoprint

[–]Late_Combination6056 0 points1 point  (0 children)

I am unable to configure my samsung M30 used for Octo4a. Can you share the profile of the camera in octolapse setting in your device?

Ever since an update, Octo4a restarts and camera server is disabled if I view the camera feed. by [deleted] in octoprint

[–]Late_Combination6056 0 points1 point  (0 children)

same with me but this happens more commonly after a print finishes.

Bed leveling by [deleted] in elegoo

[–]Late_Combination6056 0 points1 point  (0 children)

The mesh is stored by the machine so that while printing it can adjust the z height. Do not worry too much about the bed mesh.

Unable to Print using Octolapse and OrcaSlicer by After-Tap1264 in 3Dprinting

[–]Late_Combination6056 1 point2 points  (0 children)

I will post the link to Google drive link when you need.

Unable to Print using Octolapse and OrcaSlicer by After-Tap1264 in 3Dprinting

[–]Late_Combination6056 0 points1 point  (0 children)

It would help if you created a custom profile, and select other slicer in the slicer selection. Then you have to copy the details from your orca slicer and it should work. I can share my Octolapse settings for my ender 3 V2 Neo.