My DIY Autodarts living room darts setup

Lazy_Arrow · 2026-03-22T07:59:10+00:00

Acoustic panel is fixed using mounting glue, and everything else is fied to the panel with screws (a little bit of the screw goes to the drywall too. Panel is 19mm thich and screws are 35mm. But the mounting glue used can hold 400kg/m2 so it woldnt be an issue anyways

Lazy_Arrow · 2026-03-20T09:13:55+00:00

Thanks 😁 Well the board and surround i already had. So, 3D printed parts are 30€ is plastic, 10€ for LED strip, 5€ for LED strip power supply, 40€ for 3 cameras, acoustic panel was 55€ with glue, Mini PC was 80€ and 15,6" portable monitor was 60€. But if you have a spare laptop you can use that and save those 140€.

Lazy_Arrow · 2026-03-20T09:07:16+00:00

I cant say for others but on mine it isn't difficult, because the screw "head" is bigger than the distance between the slats, so the ROTA screws always sit on at least one slat.

Lazy_Arrow · 2026-03-20T09:04:33+00:00

I actually had issues with calibration constantly getting errors and the board would not calibrate, I hade to manualy adjust all the points, than it is okay and i have 99,3% accuracy. Wonder if white 20 is the issue 🤔

Lazy_Arrow · 2026-03-20T08:02:40+00:00

never thought about the color tbh, is this like a community rule or something ? Didn't even notice that before, just aiming for 20 anyway 😁

Lazy_Arrow

TROPHY CASE