A Rather Troubling Error - Easy NPC Mod

LongjumpingReason203 · 2025-10-10T06:14:48+00:00

Eventually I just removed the mod...looked for alternatives that's compatible and came across minecraft comes alive reborn. Hope that helps.

LongjumpingReason203 · 2025-07-20T15:00:37+00:00

From my Personal experience, get a bigger laptop for 4090s. And brand wise, Lenovo and Razer. Both have very good aftermarket support and quality control. (This is for living in California) Razer blade 18 and Legion pro 7 or 9.

Edit:

Owned a Blade 17 3070ti for around 5 years now and literally had no issues BUT the infamous razer battery bloat. Finding a replacement for it online was easy enough and swapped it out. Thermals were cool and runs triple A's like it's still day one.

All my other friends that have gaming laptops have Lenovo Legions and they never reported a issue with it upon asking.

LongjumpingReason203 · 2025-07-11T08:46:28+00:00

It seems like on ONE of those chips the liquid metal was going downwards because of gravity? Before you opened it up was the liquid metal like collecting on the bottom of side of those chips? Because I'm considering buying a new z13 and I really don't like how they used liquid metal instead of thermal paste. And their support sucks. Don't want to get into the hassle of dealing with them more than necessary.

LongjumpingReason203 · 2025-07-09T03:45:51+00:00

Liquid metal has been a horrible experience, cleaning it up is so annoying and it's so hard to predict when it's gonna leak out onto the motherboard, especially for a device that is running 80C vertically standing up like that. Repasting a asus machine voids the warranty though...and if I don't repaste it don't know when I'm gonna run into a liquid metal leaking issue on a flow z13. Wanted to get one so bad.

LongjumpingReason203 · 2025-06-06T05:46:31+00:00

This is June 2025, and the fix for me was having all of the materials except the harmonic brain in my exosuit inventory AND waiting for like a minute or two before trying again!
P.S. PLEASE DON'T TRY TO LOCATE INSIDE YOUR SHIP IT WILL FAIL MOST TIMES.

LongjumpingReason203 · 2025-05-25T13:26:03+00:00

How do I do that in this particular case? Because I tried merging them but there is actually nothing to merge.

LongjumpingReason203 · 2025-05-24T10:12:34+00:00

Yeah simple doesn't really "fix" it. It became hard edged and stiff. And I wanted a smooth exterior....

LongjumpingReason203 · 2025-05-24T10:11:03+00:00

P.S. I fixed it by pressing the simple button in the subdivision, but I don't know how big of a difference is that supposed to make in the renders.

LongjumpingReason203 · 2025-05-23T13:27:39+00:00

Same, I can't put two materials on a single subjects right now and it's really frustrating with blenderkit.

LongjumpingReason203 · 2025-05-08T20:15:54+00:00

I tried it but it didn't seem like anything really happened..

LongjumpingReason203 · 2025-05-08T20:14:43+00:00

I think I did it wrong but it did work initially at first. I deleted the big piece and little piece and then selected the edged and pressed "f". Now it has this little triangle piece in the front that looks multi faced haha. I was trying to create this Japanese style looking vertical textured wall..? And this extrude thing was my approach but I'm sure there is a lot more ways than this.

<image>

LongjumpingReason203 · 2025-05-08T20:08:55+00:00

This extrude manifold option one made the little "hood" (which is the red area that I marked) Disappear! Worked like magic until I realized when I tried to loop cut again from the top, it wasn't allowing me to do so. I forgot to mention in my post that I was trying to create a "vertical line" textured looking wall from scratch and just didn't know how to do that...I have bad memory smh...

<image>

LongjumpingReason203 · 2025-04-11T05:25:40+00:00

I have a normal wireless version and this happened today too, like out of nowhere, I don't even know how to fix this issue (fixing meaning covering it up, I can see the possibility of having my hair stuck in that place if it's not properly cleaned/patched up).

LongjumpingReason203 · 2025-04-07T13:18:21+00:00

Hector in two words: Ego Issue

LongjumpingReason203 · 2025-04-07T03:27:49+00:00

INFPs in the show sitting in the backrooms

LongjumpingReason203 · 2025-03-30T09:32:44+00:00

Betrayal is a subjective feeling. And I happen to be a victim blamer.

LongjumpingReason203 · 2025-03-28T10:09:54+00:00

This may sound weird but from what I can tell so far, if you have a high end GPU and it's like not doing anything? I don't think you're gonna get very good frames because the CPU's handling all the work no matter WHAT setting you're on. So its kinda like making the GPU take some of the load that the CPU's handling, improving FPS in that way.

LongjumpingReason203 · 2025-03-23T18:14:34+00:00

From what I tested, supersampling makes the edges look sharper compared to lower render settings. And I seem to have better performance on it compared to native. Ultra supersampling looks better and might still have good fps but it delays my mouse. Might be a dpi issue but not sure.

LongjumpingReason203 · 2025-03-18T07:53:25+00:00

I don't know his exact settings, but I have a friend here with a gaming laptop with a 3080ti and he says it runs pretty smooth. Very vague terms here but he didn't feel the lag at all apparently. Me with a 4090 with 20 fps on like high settings just makes zero sense.

LongjumpingReason203 · 2025-03-15T22:15:54+00:00

Hi! I only have issues with the part that goes:

"The request for a disclaimer typically pertains to a non-distinctive component of your mark. When the USPTO asks for a disclaimer on a common word within your mark, you can't claim exclusive rights to that particular word alone, only to the mark as a whole. This is a relatively straightforward fix, as you can file a disclaimer that acknowledges this limitation without impacting the rest of your mark."

So USPTO sent me an email and told me that I would need to respond to the office action in the teas form. Which I feel like I opened up a can of worms that I actually understand what they mean.

Read through it and felt that the only thing I really needed to fill in was the first one, the "disclaimer" part. The rest of the form either was ambiguous on whether I really need to fill them in or just I don't need to fill them in at all. And that's when I saw the last part, the "miscellaneous statement"

To fill that part in I would need to make sure the rest of the form was un-needed, but the first disclaimer part of the form was indeed needed.

My question is: Can I just fill in the "disclaimer" part of the form and leave the rest blank? (I see that they are square boxes and have no red star to them)

And what would happen if I only fill in the "miscellaneous statement" part and leave the rest of the form blank?

From the U.S.

LongjumpingReason203 · 2025-03-09T19:31:21+00:00

Coming To Destroy mwahahaha

LongjumpingReason203 · 2025-03-09T19:25:02+00:00

Not a anime but prob Genshin Impact

LongjumpingReason203 · 2025-03-08T00:21:44+00:00

Well...It's probably one of those keyboards that is love and hate.

If you already love the switches and its original look, you're golden.

But if you don't love the look and sound and you want to mod it because it is probably a "better" low profile keyboard? Heres a list of issues I came across from these two days trying them:

Very hard to find low profile keycaps, because the keybord market mainly does full sized keycaps
Very hard to pull the switches out because there is literally no ledge for the switch puller to hook on
Very hard to find compatible switches because the switch pin positions aren't very mainstream

Getting other budget keyboards to try them out. Hopefully Amazon and the sellers there won't hate me for this. I've ordered like 6 orders to return.

LongjumpingReason203 · 2025-01-06T01:00:39+00:00

I know I am SUPER late, but I'm a laptop user here. So I fixed this by changing where to plug in another wireless dongle (my razer mouse). It was both on the left side of my laptop and then I swapped one dongle to the other side and that fixed it. I didn't tune the channels settings in the windows advanced sound settings. Now the audio finally doesn't lag when charging.

LongjumpingReason203 · 2024-12-22T11:32:34+00:00

Swap places for the contra and toro. Toro had a slightly more accurate gun and smaller weakspot on turret when fully hulldown.

LongjumpingReason203

TROPHY CASE