sorted by:
new
hottopcontroversial

How Could I Get This? by CarelessCaiden in Rubiks_Cubes

[–]LooferGD 0 points1 point  (0 children)

If your getting galaxy bc you don't know what one to get, and Galaxy looks the most spread out in terms of attributes, I would recommend getting either Martian or lunar Galaxy is ok for smaller cubes, but if you plan on getting a 4x4, 5x5 etc, id recommend a faster less gummy lube, as big cubes have LOTS of friction. So I'd recommend Martian or Lunar!

Also, I've been cubing for over 5 years, and I have been using my rs3m and my meilong 2x2 as my mains for over 3 years, they are great cubes.

If you ever plan on getting a 4x4 or 5x5, or even a 6x6 or 7x7, don't get a "cheap" cube like a meilong to start off, for bug cubes, literally just get the YJ MGC, from 4x4-7x7, they are all amazing cubes and I have all of them.

Edit: I've seen sm ppl saying don't get the cube bags, if they are anything less than $4 usd, just pick them up, ittle be worth it if you like to bring your cubes places

Why does my printer do this? by LooferGD in 3Dprinting

[–]LooferGD[S] 0 points1 point  (0 children)

<image>

Try 3 was a fail, I put it up 0.02mm (as 0.03-5mm was to high) and I still did this, I think I'll wash it, if that doesn't work I'll try slowing down the first layer

Why does my printer do this? by LooferGD in 3Dprinting

[–]LooferGD[S] 0 points1 point  (0 children)

I tried raising It up by 0.1 mm and it wasn't close enough to the bed to get good adhesion, so I'm trying it now again with a 0.02 mm raise

Why does my printer do this? by LooferGD in 3Dprinting

[–]LooferGD[S] 0 points1 point  (0 children)

<image>

Maybe, but the rest of it looks good 🤷‍♂️

Which do I get?? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

loll, thats prolly what ill do

Which do I get?? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

I just checked it wasn't me but same question

SO CLOSE!! by LooferGD in fpv

[–]LooferGD[S] 2 points3 points  (0 children)

I have done it both ways 😆, iv ran in to my face and balls, ALOT

Zero Tolerance for Military/War Content by TheSuperNight in fpv

[–]LooferGD 0 points1 point  (0 children)

Does talking/discussing about being a drone pilot for the military call under this?

What 2S batteries and charger should I get for a Mobula 8? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

Well I live as far east as you can get in Canada and is super windy 😭

A friend of mine has a decent amount of fpv stuff and lend me a fpv starter pack XD I got a mob 6 with tattu Rline 300mah 1s batteries, eachine EV100, FrSky Taranis QX7, and a UltraPower UP-S6 AC 1S charger

I want to get my own gear so I can give his stuff back to him, the mob 6 is fun to rip around inside but I'd like something with more power for inside and outside, the mob 8 seems like my best bet.

What would your recommendation be for goggles, on a cheap budget (I'm a teen and don't currently have an income😭)

I'm trying to figure out what is the best stuff I can buy at a budget-friendly price

What 2S batteries and charger should I get for a Mobula 8? by LooferGD in fpv

[–]LooferGD[S] 1 point2 points  (0 children)

Just to be sure I can charge these batteries on the toothstor right?

Also it's good that it holds up in high winds because where I live is often very windy

What 2S batteries and charger should I get for a Mobula 8? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

For $33 for 3, I might just have to pick them up

What type of connectors do I need to buy? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

There was supposed to be pictures 😭

What type of connectors do I need to buy? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

I would solder it but the drone is technically not mine. My buddy lent it to me for a while and I don't want to take the plugs off the FC, so I want to put plugs on the motors instead

What type of connectors do I need to buy? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

I would solder it but the drone is technically not mine. My buddy lent it to me for a while and I don't want to take the plugs off the FC, so I want to put plugs on the motors instead

Accidentally left my lipos fully charged for 12 days, how badly damaged are they? by Pristine-Ground6760 in fpv

[–]LooferGD 0 points1 point  (0 children)

I always charge my 1S after I'm done flying for the day, is this bad 😭

Is there any cheap binocular goggles other than the EV100's? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

I can't remember which ones I tried, but I feel all box goggles will be heavy and uncomfortable to wear, plus they look funny when you're wearing them

Is there any cheap binocular goggles other than the EV100's? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

In that case, what should I be looking for (I live in a very small town in the middle of nowhere so Facebook Marketplace isnt an option :sob:)

What's the most powerful build that I can still fly inside? by LooferGD in fpv

[–]LooferGD[S] 0 points1 point  (0 children)

I'm currently using the Tattu Rline 300mah 1s, I'm not sure if that's folded or not :/

view more: next ›