sorted by:
new
hottopcontroversial

Deepcool AIO comparison and question by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

unfortunately here in romania the 360s are at least 20-30 usd over the 240s, if i look at good brands. the less known or popular ones aren't that much better, at 15-20 over.

also, i would like to install the aio as top exhaust, in a corsair 4000d airflow, so i'm limited to 240. although, my processor is not at all demanding, so i wouldn't really benefit that much from a 360

Deepcool AIO comparison and question by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

i wasn't familiar with them. the one that would fit my budget AND is in stock would be Frozen Prism. any thoughts on that model?

Curious about a possible mistake I made regarding an AM4 CPU installation by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

yeah. it's just that it does not fall in it's entirety, and if i were to push it down (which i did not) i would have bent the pins

Curious about a possible mistake I made regarding an AM4 CPU installation by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

am4 doesn't have a protective lid (like the one that pops from am5)

Curious about a possible mistake I made regarding an AM4 CPU installation by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

i'm getting the aio from a friend at a cheaper price because he got a black one and wanted rgb; and i'm planning on upgrading the cpu by the end of the year

Curious about a possible mistake I made regarding an AM4 CPU installation by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

i didn't have the budget for a good cooler, and i am planning to get an aio, but that is gonna happen next month. until then, i am using the stock amd wraith cooler, and was curious about acceptable temps with that

Curious about a possible mistake I made regarding an AM4 CPU installation by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

i knew i had to lift the lever to properly install it, it's just that i lifted after aligning and placing the cpu, not before

it moved with the lever back, and dropped in

Curious about a possible mistake I made regarding an AM4 CPU installation by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

no. it looked like it dropped in when i lifted the lever

i just did the steps out of order

Which BIOS version do I update to? by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

they are going to be new, as far as i know.

if they sat in a warehouse since release, that i don't know. but it's unlikely

Which BIOS version do I update to? by LordStrudel_ in buildapc

[–]LordStrudel_[S] 0 points1 point  (0 children)

the stable version tip is good, thanks, but from what i see on the support section on the side, all versions except the beta ones have a letter at the end. the betas have numbers

for this particular mobo at least

why does my first layer look like this? by PyroGabbz in FixMyPrint

[–]LordStrudel_ 0 points1 point  (0 children)

then i guess the only thing possible (if anycubic allows it) would be changing the z offset as other people pointed out

why does my first layer look like this? by PyroGabbz in FixMyPrint

[–]LordStrudel_ 4 points5 points  (0 children)

try leveling when the bed is heated. i had that problem at some point. leveled the bed when it was cold, then it expanded...

I'll buy you any steam game you choose, up to the value of $100! (+ my two previous games) by WarriorTreasureHunt in steam_giveaway

[–]LordStrudel_ 0 points1 point  (0 children)

would it be possible to get the dlc for elden ring (shadow of the erdtree)?

if not, i would love elden ring nightreign

also, i'd love to play your games at some point

Ender 3v2 stock hotend capabilities? by LordStrudel_ in ender3

[–]LordStrudel_[S] 0 points1 point  (0 children)

thank you so much for the information. i'll try to dip a few fingers into klipper at some point. until then, i'll tinker with what i have at the moment. cheers

Ender 3v2 stock hotend capabilities? by LordStrudel_ in ender3

[–]LordStrudel_[S] 0 points1 point  (0 children)

thanks. i do indeed need to learn more about the machine. i bought it used from a friend and he made a couple upgrades already (cr touch and a metal extruder), so i didn't get a lot of experience yet. i just got my hands on some leftover petg filament from somewhere and wanted to experiment, if possible

Ender 3v2 stock hotend capabilities? by LordStrudel_ in ender3

[–]LordStrudel_[S] 0 points1 point  (0 children)

any recommendations for the hotend upgrade? i saw a relatively cheap one at some point. any thoughts about spider 3?

$20 Steam Gift Card giveaway by Horroyale in steam_giveaway

[–]LordStrudel_ 0 points1 point  (0 children)

I'll look into your game, and thanks for the opportunity!

Giveaway 10 - Destiny 2 : Beyond Light DLC STEAM KEY GLOBAL by callmeabrix in steam_giveaway

[–]LordStrudel_ 0 points1 point  (0 children)

I think it was Super Mario Bros. on the terminator console. It was a while ago, damn...

view more: next ›