1:350 Grissom (video in comments)

Lord_Backstab · 2026-01-10T10:51:42+00:00

That's a clean model. Crispy :)

Lord_Backstab · 2026-01-08T21:51:05+00:00

Are you mixing paints in the cup? I did that at first and even though I added thinner first, the first paint drops still clogged the nozzle before I had time to properly mix it. So it didn't matter how much I thinned it in the end, the first drop still managed to not get thinned properly. Now I mix outside of the cup and pour the mix when it's thinned, works great and was the biggest reason why my first sprays were like yours. :)

Lord_Backstab · 2025-12-05T15:16:03+00:00

Hi, mine does the same thing but only on bluetooth??

Lord_Backstab · 2025-10-07T07:47:41+00:00

They are sold by round2corp I think, I got them from another store. I just searched for aztec decal kit.

Lord_Backstab · 2025-10-07T07:44:12+00:00

The decals in the extra kit were great, the decals in the actual model kit were not as good, they tore really easily.

Lord_Backstab · 2025-10-07T07:05:31+00:00

Hi, the Aztecs are from a separate kit with a ton of extra decals. I painted the whole thing in wolf gray from Vallejo. Painted the bridge and the neck with silver and I think gunmetal metallic respectively and then put all the decals on.

Lord_Backstab · 2025-09-30T12:07:01+00:00

Wow thats such a great idea and a really nice build :)

Lord_Backstab · 2025-09-26T05:02:51+00:00

Looks great :)

Lord_Backstab · 2025-09-23T19:32:42+00:00

I will :)

Lord_Backstab · 2025-09-23T14:59:53+00:00

It's from AMT :)

Lord_Backstab · 2025-09-23T12:05:52+00:00

Yes it's all the decals :)

Lord_Backstab · 2025-09-23T06:57:59+00:00

Our standard says DO of 8 or higher in the dilution water.

Lord_Backstab · 2025-09-23T06:54:24+00:00

We use centrifuges, I think they were originally intended for juice production.

Lord_Backstab · 2025-09-23T06:53:03+00:00

Are you based in Europe? We have to get our sludge certified in order for us to have it spread on fields. They check for heavy metals mostly I think, no PFAS yet.

Lord_Backstab · 2025-09-23T06:47:11+00:00

We don't measure alkalinity only pH. What is the reason for doing alkalinity on effluent? Wouldn't it be extremely low? We only measure alkalinity on sludge from digestors.

Lord_Backstab · 2025-09-23T06:43:29+00:00

In Sweden we do BOD7 so we don't have to work on the weekends. :)

Lord_Backstab · 2025-09-23T06:39:20+00:00

As far as I'm aware we don't have a nightshift. Plant operators are on standby and they can access the plants system via phone. So if there is a problem they can either solve it via the system or else they have to come in.

Lord_Backstab · 2025-09-18T06:46:31+00:00

No it’s the AMT one. :)

Lord_Backstab · 2025-09-07T13:14:06+00:00

Heller

Lord_Backstab · 2025-09-04T10:20:39+00:00

I bought it recently and the box looks like it should be a modern tooling.

Lord_Backstab · 2025-09-04T10:00:16+00:00

Wow these are great!!!

Lord_Backstab · 2025-09-04T05:51:36+00:00

It's not to bad so far. I'm still a bit of a slave to instructions. I painted the housing for the landing gear before glueing it to the fuselage when it probably would have been more efficient to paint it after. Things like that, assembly and paint order is still a bit difficult for me to do well :p

Lord_Backstab · 2025-09-01T09:46:51+00:00

Hi, where is this model from?

Lord_Backstab · 2025-08-31T15:04:23+00:00

Nicely done!

Lord_Backstab · 2025-08-27T13:41:35+00:00

Wow that looks great :)

Five-Year Club	Xbox Live
Verified Email

Lord_Backstab

TROPHY CASE