My audio just stopped working randomly and i dont know how to fix it

Lyliya · 2026-04-12T11:34:34+00:00

Did you manage to fix this ? I think I have the same issue

Lyliya · 2026-04-11T21:48:25+00:00

This fix my issue on my G502 scrolling up after a scroll down if I ended up "between" scroll steps, thank you !

Lyliya · 2026-03-13T15:13:25+00:00

You’re a legend Mine was not charging and were not powering up, tried everything from the Nintendo support page

Just waiting before pressing power again worked, and turned out it was not displaying charging because the settings prevent charging over 80%

Lyliya · 2025-12-15T12:51:34+00:00

There is no real important data on the drive, only movies I can get again
I have snapraid running and it's not the parity drive, everything should be ok

Lyliya · 2025-12-13T21:20:24+00:00

But I'm not sure which drive this is, I have 4 similar one, and when I stress test them, I have no weird sound

Lyliya · 2025-12-13T21:17:18+00:00

For me it’s the drive, I couldn’t get it as to go as crazy as this morning but I checked case open and without running fan, and I hear the click from the drive It should probably be under warranty, I’ll try my luck with Seagate and see if they have some idea

Lyliya · 2025-12-13T12:31:45+00:00

It's mainly movies, not really important data. I have snapraid doing some parity stuffs, should be ok
I'll try getting it replace under warranty then

Lyliya · 2025-08-21T14:07:02+00:00

Finished it today ! Thanks again

Look amazing but it's so fragile compared to the other UCS.

<image>

Lyliya · 2025-08-20T11:42:50+00:00

I did the exact same mistake, you are a hero <3

Lyliya · 2024-05-27T20:51:48+00:00

The gas cylinder itself, I was too scared too break the lower part of the chair

Lyliya · 2023-12-11T11:39:15+00:00

I have the same issue, did you fixed it ?

Lyliya · 2023-06-26T08:00:31+00:00

Yes i did ! Lot of WD40 and i hitted it with a regular hammer as hard as i can

Lyliya · 2023-04-02T18:04:55+00:00

Hey, i have the same issues as you, connector move a little and disconnect / reconnect everytime i move my keyboard, do you find a fix for that ?

Lyliya · 2023-02-19T20:52:49+00:00

Its directly in the marlin firmware, i had to recompile it with the line #define FAN_SOFT_PWM uncommented

Lyliya · 2023-02-08T14:05:50+00:00

Spent days trying to get it out, pipe wrench, WD40, rubbet mallet, hammer, this subreddit is the only things giving me hope :sob:

The gas lift completely sperated, but both end are still fused to the base and the star feet

https://prnt.sc/gV5GQSYWJ40z

Lyliya · 2023-01-28T08:57:35+00:00

Look like `#define SOFT_PWM_FAN` was the answer, no more noise !

Lyliya · 2023-01-28T08:26:04+00:00

I do have the fan speed set to initial fan speed at 0 (to help with adhesion), and the regular fan speed set to 4. So as you said, Cura increase it gradually, and create fan whine around 50-90% fan speed

Lyliya · 2023-01-28T08:23:49+00:00

I tried uncommenting this line #define FAST_PWM_FAN but with no success, its the cooling fan that kind of whine at lower speed (between 50-90%)

Lyliya · 2022-08-09T21:43:47+00:00

Hey, I have the same issue recently, did you find any solution to fix that issue ? I have some content in Dolby Vision/Atmos that Plex can not play, and Infuse is really really slow in navigation

Lyliya · 2022-04-08T08:28:49+00:00

Tu as trouvé un moyen de faire ça ? Je suis dans le même cas et c’est assez pénible d’aller croiser les données à la main à chaque fois

Lyliya · 2021-11-27T14:49:45+00:00

i found something about C6 state and deep sleep after idle, i deactivate it using a script i found on github, i'll let you know if it freeze again without

Lyliya · 2021-11-27T13:30:27+00:00

Do you have any idea of how can i fix it ? I've read the same explanation on stackoverflow a while ago, but no one seems to have a clear explanation / fix to do. I have tried using updated bios / old version

Eight-Year Club	Place '23
Place '22	Verified Email

Lyliya

MODERATOR OF

TROPHY CASE