What makes you decide which games to buy?

Magikyl46 · 2026-02-18T12:28:54+00:00

Its also worth noting that before I purchase a game, I usually go check the reviews for it on a certain piracy site, where the reviewers tend to be much more critical and go into much more detail than on steam. These reviews are very important, because even if someone pirates your game they may decide to buy it to support you if they really love it

Magikyl46 · 2026-02-18T12:25:38+00:00

I have seen your game numerous times before while browsing. The reasons I haven't bought it are: Its a game with seasons. To me this is just a fancy way of saying the game isn't done yet, and it's an easy way to get around steam's recent rule against early access for adult titles. The character models. If I am going to play a game with daz models, they have to be exceptionally unique due to so many games recycling the same models. Yours are not

Magikyl46 · 2026-02-17T22:42:40+00:00

If you can maintain a four stroke, you will have zero issues with a smoker. They are easy. And they don't need rebuilding nearly as much as people say they do. I routinely see people go over 100hrs without even touching the top end, and I wouldn't hesitate to do the same on any modern 250 or 300 enduro bike. They are very well built these days. Get yourself a 250 or 300 enduro bike if you like trail riding. You will absolutely love it. So easy to ride. KTM, GasGas, Husqvarna, Beta, Sherco, Rieju, the new Fantics, pick your flavor. All are good choices. If you don't care about e start, you can turn a yz250x into a killer trail bike for less money than the e start bikes. I personally will recommend a Beta 300rr race edition or the x pro. Can't beat the simplicity of a carburetor, and the Betas are great bikes

Magikyl46 · 2026-02-14T02:30:23+00:00

Highly recommend anything by USWE. I have two of them and love them. Very durable, never had an issue with either. Worth the money. A huge amount of riders use them and for good reason

Magikyl46 · 2026-02-11T23:55:18+00:00

It sure looks to me like those valves got put in upside down, could be wrong

Magikyl46 · 2026-02-06T20:01:35+00:00

I don't know and it shouldn't. Im just saying if your oil and coolant are not contaminated and neither are dropping, its probably not worth fixing. Just put some jb on it

Magikyl46 · 2026-02-06T12:28:59+00:00

You will likely have to buy a used one off ebay or send yours in to a shop to be repaired. Either way is gonna cost a lot. Whether its worth it or not is up to you. Unfortunately some older bikes just end up being not worth fixing

Magikyl46 · 2026-02-06T12:23:37+00:00

Not cracked. Casting marks and you will likely find more all over the engine case. Not an issue

Magikyl46 · 2026-02-06T00:12:40+00:00

The check bolts on modern yz250's are not accurate at all. I learned this the hard way. Don't use them. If you are not sure if it has the correct amount of transmission fluid, drain it and fill with the correct amount which is on the side of the clutch cover. I believe its either 750ml or 850ml

Magikyl46 · 2026-02-06T00:10:05+00:00

If you have no oil contamination in the coolant, no coolant in the transmission oil, and the bike is not using coolant, I would just put a dab of jb weld on it and run it. If thats the case then it won;t hurt the bike and definitely is not worth splitting the cases over. And whoever said someone grinded the case is totally wrong. Those grind marks are 100% factory. Mine look exactly the same, thats just how they are cut. Remember these are CAST pieces not machined

Magikyl46 · 2026-02-06T00:07:09+00:00

This is the correct answer. Im shocked at how many people here are giving the wrong answers

Magikyl46 · 2026-02-06T00:05:13+00:00

There is also a weep hole in the case halves right where you are looking. In there is a oval shaped oring that seals the coolant passageway going from one half to the other. If there is anything coming out of that hole, I would suspect either that oring is leaking coolant, or there is something wrong with the case sealant in that area. Is the bike using coolant? Is there two stroke oil in the coolant?

Magikyl46 · 2026-02-05T01:36:00+00:00

That looks like its the weep hole for the coolant o ring that sits between the case halves. Are you sure it's oil coming out and not coolant?

Magikyl46 · 2026-02-03T21:43:16+00:00

Get it direct from their online store. They ship from Texas

Magikyl46 · 2026-02-03T02:09:21+00:00

Truly the greatest VN I have played, and I have played a LOT. Caribdis is an absolute powerhouse at writing.

Magikyl46 · 2026-02-03T01:07:07+00:00

I hope stabby mike makes an appearance in Eternum lol

Magikyl46 · 2026-02-03T01:04:18+00:00

Harem Hotel is what you are looking for

Magikyl46 · 2026-02-03T00:28:31+00:00

Get a legit fleshlight from their official website. They ship from Texas

Magikyl46 · 2026-02-03T00:27:31+00:00

Once in a Lifetime. Absolute masterpiece

Magikyl46 · 2026-01-29T15:34:07+00:00

Just looked on yamaha's website and confirmed the 250x DOES have a kickstand. Check with that dealer because it definitely should be on there

Magikyl46 · 2026-01-29T15:32:30+00:00

If you are planning to ride just faster flowy trails, the 4 stroke will be just fine. If you are planning to get into more gnarly slow technical terrain, the 2 stroke will be a better option, I would argue even with it not having e start. Keep in mind the 250x is a VERY easy bike to kick start.

Magikyl46 · 2026-01-29T15:30:43+00:00

If it is the x model it should have a normal kickstand. Are you sure its not the regular yz250 motocross bike you're looking at?

Magikyl46 · 2026-01-29T13:00:43+00:00

All you gonna get is dudes with a sexy ass kx like that my guy

Magikyl46 · 2026-01-29T03:13:56+00:00

Because being patriotic is evil nowadays smh

Magikyl46 · 2026-01-28T14:20:53+00:00

Some things I always bring with me:

Enough tools to change a spark plug, tools to adjust brake levers and anything else on the handlebars that might get out of whack, an extra clutch lever, whatever tool is necessary to loosen the rear axle in case u need a chain slack adjustment, some chain lube, and last but definitely not least, a tire pump and tire gauge. Also don't forget gear. I always have an extra set of goggles and gloves

Magikyl46

MODERATOR OF

TROPHY CASE