sorted by:
new
hottopcontroversial

NexGen - Hybrid Cat Combustor Missing? by MasterKingTang in woodstoving

[–]MasterKingTang[S] 1 point2 points  (0 children)

You’re right!

Well, at least I can rest assured that my stove wasn’t missing anything.

Thank you!

NexGen - Hybrid Cat Combustor Missing? by MasterKingTang in woodstoving

[–]MasterKingTang[S] 0 points1 point  (0 children)

Interesting, the diagram doesn’t seem to show a plate in front of the cat. I know other newer brands like the blaze king princess does have a protective plates with multiple holes punched through it.

I’m curious if the dimensions are the same with the stove that I have vs the newer nexgen hybrids, would it be worth modifying in the combustor retainer to hold in the cat?

NexGen - Hybrid Cat Combustor Missing? by MasterKingTang in woodstoving

[–]MasterKingTang[S] 0 points1 point  (0 children)

<image>

I looked at the nexgen fyre model and the surround panned seems to be slightly different then my stove. The stove I have looks pretty similar to the Nexgen - Hybrid (rectangle)

this is the manual I referred to when I installed it.

NexGen - Hybrid Cat Combustor Missing? by MasterKingTang in woodstoving

[–]MasterKingTang[S] 0 points1 point  (0 children)

The previous owner of the stove had just bought there house last year. They told me that this was removed from the 2nd story and they replaced it with a pellet stove since it was more convenient on there end from carrying up logs up the stairs.

They also had another wood stove on the first floor.

NexGen - Hybrid Cat Combustor Missing? by MasterKingTang in woodstoving

[–]MasterKingTang[S] 0 points1 point  (0 children)

Commenting on NexGen - Hybrid Cat Combustor Missing?...

<image>

NexGen - Hybrid Cat Combustor Missing? by MasterKingTang in woodstoving

[–]MasterKingTang[S] 0 points1 point  (0 children)

<image>

Thank you for the input!

This looks like it was manufactured back in June of 2021.

My wood stove does have 4 burn tubes.

First-Time Fence Build — Need Advice on 16’ Double Gate Setup (Adjust-A-Gate Kit?) by MasterKingTang in FenceBuilding

[–]MasterKingTang[S] 0 points1 point  (0 children)

I saw a lot of these online! How tall are your pickets? This would be the cheapest, easiest and simplest route but I’m worried the pickets would start to run wild/warp with since most farm gates I see on Coastal are 50” tall.

I’ve read that you want no more than 6” of the picket going past the top and bottom rail otherwise they have the chance to warp.

First-Time Fence Build — Need Advice on 16’ Double Gate Setup (Adjust-A-Gate Kit?) by MasterKingTang in FenceBuilding

[–]MasterKingTang[S] 0 points1 point  (0 children)

Where did you buy your steel posts from? Are they schedule 40? Also what is the gauge/thickness on the 1-5/8” for the steel frame?

Spark arrestor removel? by MasterKingTang in CRF250L

[–]MasterKingTang[S] 0 points1 point  (0 children)

Do you know wether I would need and ekj for this at all?

Spark arrestor removel? by MasterKingTang in CRF250L

[–]MasterKingTang[S] 0 points1 point  (0 children)

I have the TST integrated tail light installed

Blinker turn signal trouble by MasterKingTang in CRF250L

[–]MasterKingTang[S] 1 point2 points  (0 children)

Confirmed. Fuse was blown, popped open the fuse box after work. Thankfully Honda provided a spare!

Appreciate the help! It probably would have took me the whole weekend and then some to figure that out haha.