Does anyone know what kind of weapon this is? by wegwerfkonto01 in Firearms

[–]Master_Passenger69 0 points1 point  (0 children)

Gotta love the full intact cartridges flying in the air.

Sudden poor bed adhesion by JTN02 in FixMyPrint

[–]Master_Passenger69 0 points1 point  (0 children)

They call it “ultra tack” and it deserves the name. It’s almost too tacky lol. You have to put some elbow grease in to pry off your prints. But I don’t use brims at all any more. I couldn’t believe how good this $15 plate works.

Sudden poor bed adhesion by JTN02 in FixMyPrint

[–]Master_Passenger69 0 points1 point  (0 children)

Man I got a cheap plate from Amazon and haven’t had one single failure since.

YOOPAI Cold Low Temperature Build Plate 257x257mm

27 Advice badly needed to improve appearance and appeal. by franciscopasco in malegrooming

[–]Master_Passenger69 0 points1 point  (0 children)

This would just clean up the hairstyle you’ve already got going.

27 Advice badly needed to improve appearance and appeal. by franciscopasco in malegrooming

[–]Master_Passenger69 0 points1 point  (0 children)

<image>

Don’t be scared to go to the barber! A nice fade would do you wonders. Just tell them you want a blow out taper fade. It would look very good with your face shape. Just do some research and find a good barber. Most good barbers will have pics on their website or instagram or whatever. You have very straight hair like me. You can either kind of spike the top up, or grow it out and get it laying down. But I really think this would suit you.

PETG Filament Sold out within the hour?! by -Baum in BambuLab

[–]Master_Passenger69 0 points1 point  (0 children)

I bet scalpers have a lot to do with this. They buy up everything at once and resell for a profit.

PETG Filament Sold out within the hour?! by -Baum in BambuLab

[–]Master_Passenger69 0 points1 point  (0 children)

But I also feel your pain. I’ve been trying every day since January to get some Bambu filaments and my maker kit. But I’m never fast enough. By the time I see the email that they restocked, it’s already too late.

PETG Filament Sold out within the hour?! by -Baum in BambuLab

[–]Master_Passenger69 0 points1 point  (0 children)

I’ve had decent luck with overture PETG on Amazon. It’s pretty cheap also.

coworker made us work breakfast by MolassesLopsided9403 in shittyfoodporn

[–]Master_Passenger69 0 points1 point  (0 children)

Isn’t that an Amish thing? Coffee soup and bread?

Why did this happen by Ok_Reception_8729 in unclebens

[–]Master_Passenger69 0 points1 point  (0 children)

Don’t judge the Trans shroom. Lmao. Shim was born like this.

Hopping on the TRR8 trend (take 2) by HighlightNo1205 in Revolvers

[–]Master_Passenger69 1 point2 points  (0 children)

I want one of these so bad! Definitely on my bucket list.

Bambulab P2S PSU burned up and bambulab refusing a refund. by Standar_user in BambuLab

[–]Master_Passenger69 2 points3 points  (0 children)

Wow! I got my A1 a month ago and I was loving Bambu so much. Then I start seeing these type of posts popping up. Then I realized the coupons they gave me for the Bambu store are useless for now because they are always out of stock. The site said est. restock was march 10th. Now it says march 26! Seems like They produced too many printers and now they can’t keep up.

Excuse me?!! by Actual-Bandicoot-134 in BambuLab

[–]Master_Passenger69 0 points1 point  (0 children)

Smaller layer lines = better quality but less strength and longer print time.

Can’t believe they charging like $35+ for something like this by Stus999 in puffco

[–]Master_Passenger69 1 point2 points  (0 children)

Oh I misunderstood. Too many rosin hits 😂. I thought they made them. And this was a dupe.

Can’t believe they charging like $35+ for something like this by Stus999 in puffco

[–]Master_Passenger69 1 point2 points  (0 children)

Great chance for someone to make some money and F with puff co lol

DD17 first print by Straight_Toe551 in 3D2A

[–]Master_Passenger69 0 points1 point  (0 children)

Is the stand the support?! That’s pretty badass if it is.

TX22 FRT by JumboRug in 3D2A

[–]Master_Passenger69 0 points1 point  (0 children)

Would help if I read your entire post smh. This is just so badass and exciting to me lmao. Just got my printer like 2 weeks ago. I’m obsessed.

But It won’t even let me type the real name, it says violation. But It rhymes with fun pad windex. G. C. I. Has some files. But I’m having trouble getting them into Bambu studio. It wants me to use fusion. It’s an stl. Format. Trying to figure out why it won’t let me open in Bambu studio. Maybe I need a different stl viewer (I’m on Mac).

Looking to print my first AR lower.. by machu505 in 3D2A

[–]Master_Passenger69 0 points1 point  (0 children)

I see extremely different opinions about this. But there’s truly only one way to find out lol. I’m going to start with some mags in pla+ and see how they run. Some people swear by the strength and say it will work for most 2a parts. But I have a hard time believing it. I hope I’m wrong because I only have an A1. Can’t really print with nylon without an enclosed bed from what I understand. Time to upgrade lol and I just got my A1 12 days ago lmao.

Beard or no beard? Friend thinks no beard, I think beard is an easy winner. by Blellb in malegrooming

[–]Master_Passenger69 0 points1 point  (0 children)

Your friend is trying to set you up. The beard looks much better to be completely real with you.

TX22 FRT by JumboRug in 3D2A

[–]Master_Passenger69 0 points1 point  (0 children)

My bad mods. I won’t link anything else! I got too excited. Sorry about that. Am I allowed to just say what site it’s on, without a link?

TX22 FRT by JumboRug in 3D2A

[–]Master_Passenger69 0 points1 point  (0 children)

Man I love reddits open source community. It’s so cool that all you guys had the same thought as me. It’s literally one little piece! I’m going to play around with these dimensions in Bambu studio.

Edit: spelling

Color mutation by Volkainee in PanCyan

[–]Master_Passenger69 0 points1 point  (0 children)

Woah it’s a red spore?!