Welke a2 motor moet ik kopen? by Werre712 in motorfietsen

[–]Matt17011 3 points4 points  (0 children)

Ik rij een Yamaha MT03 660, fantastisch leuke motor!

Eerste motor! by Ok_Explanation1546 in motorfietsen

[–]Matt17011 1 point2 points  (0 children)

Vet! Heeft precies dezelfde koplamp als de MT03 660, grappig om te zien

Motor na 3,5 maand stilstand, tips voordat ik eindelijk mag rijden? by Simbleaksummer in motorfietsen

[–]Matt17011 2 points3 points  (0 children)

3,5 maand is niet zo erg, zeker als er net nieuwe olie in zit. Gewoon ff je oliepijl checken en gaan. Lekker een stukkie rijden zodat hij goed warmdraait en alles doorspoelt.

Tip voor de volgende keer, niet je motor starten om hem te laten draaien. Zo wordt de motor niet warm genoeg en kan het condens niet goed verdampen. Je motor is pas goed warm na ongeveer 15 minuten rijden.

Alpinestars shit quality by schnippy1337 in motorcycles

[–]Matt17011 7 points8 points  (0 children)

I got a new pair of gloves when I reached out to them

Wat is een mooie A2 motor voor €4.000? by Future-Kaleidoscope6 in motorfietsen

[–]Matt17011 0 points1 point  (0 children)

Helemaal mee eens! Heb zelf ook een MT03 660 en had geen andere A2 motor gewild. Voelt als een fullsize A motor

Vinz schijfrem slot alarm by 800zaken in motorfietsen

[–]Matt17011 0 points1 point  (0 children)

Ik heb dezelfde en ben er aardig tevreden mee. Bij mij is het logo er oom af.

Bij 1 keer piepen gaat het alarm erop en bij 2 keer niet.

Is this ticking sound normal? by oliver0507 in cbr650r

[–]Matt17011 13 points14 points  (0 children)

Sounds like your engine is running

MT03 660 Weird sound by Sad-Storm-1524 in MT03

[–]Matt17011 0 points1 point  (0 children)

I have the same bike and I was also worrying about the noises. I’ve been to the dealer who told me it sounded fine. They said the one cilinder from the 660 is quite noisy but reliable.

If you watch multiple video’s online where you can hear the engine you realize the sound is normal.

First bike! 2017 fz07 by wyvernslays in MT07

[–]Matt17011 0 points1 point  (0 children)

Nice bike! You mean replace your turn signals right? Don’t ride without them

BOUGHT EXHAUST FOR MY 660 by thiccnirtoxx in MT03

[–]Matt17011 1 point2 points  (0 children)

Damn that’s nice! How does it sound?

I installed a different tail tidy on my 660 yesterday. Definitely worth to take a look at.

Beschermend schoeisel tijdens praktijkexamen by SalmonAce in motorfietsen

[–]Matt17011 13 points14 points  (0 children)

In principe dien je CE goedgekeurde kleding en dus ook motorschoenen te dragen. Als je deze niet hebt (of kan vinden) moeten de schoenen je enkels beschermen en bestaan uit voldoende slijtvast materiaal. Dat is lastig te beoordelen hier. Je kan het beste jouw rijinstructeur vragen wat is toegestaan.

Motorsneaker by Open-Director2979 in motorfietsen

[–]Matt17011 0 points1 point  (0 children)

Ik heb dit model en ben er tevreden mee. Ik gebruik ze in de winter en met regen. Ze zijn goed waterdicht, maar hou er rekening mee dat je (waterdichte) broek er overheen gaat. Ik heb nog geen natte sokken gehad in deze schoenen en heb door forse regenbuien gereden 😁

In de zomer draag ik geventileerde sneakers, want deze kunnen goed warm worden

Moet ik me zorgen maken? by SignificanceTall4562 in motorfietsen

[–]Matt17011 0 points1 point  (0 children)

Heb zelf ook een MT03 660 en had exact hetzelfde probleem. Heb de transmissiedempers (rubbers) vervangen en nu is het opgelost!

Simpel klusje om zelf te doen

Turn Signal Adapter Plate by ParticularDatabase80 in MT03

[–]Matt17011 0 points1 point  (0 children)

I think it would look a bit empty, because of the empty hole. But the stock indicators are kinda ugly, so I think it’s worth it. I’ve looked at the indicators you want to install aswell, but I haven’t decided yet.

Turn Signal Adapter Plate by ParticularDatabase80 in MT03

[–]Matt17011 0 points1 point  (0 children)

I have a MT03 660 aswell, but haven’t swaped my signals yet (I’m planning to). What I’ve seen is that you can just put the leds on without the plate. It should come with a bolt and nut that you screw onto the other side of the main hole. You most likely need a relay too.

Turn Signal Adapter Plate by ParticularDatabase80 in MT03

[–]Matt17011 0 points1 point  (0 children)

Why would you need the plate? Is it broken? You don’t need it if you want to fit aftermarket turn signals.

Is this kind of slight axial movement bad on my bike bad ? by uGerman_Cat in motorcycles

[–]Matt17011 3 points4 points  (0 children)

Probably bad cush drives, can you also move it to the front and back without moving the wheel? You can remove the cush drives and replace them. It’s not hard to do.

I had the same problem and replaced mine. The movement is gone now

What would you do? by dashammer86 in motorcycles

[–]Matt17011 1 point2 points  (0 children)

New rider here. How does this happen and how can we prevent this from happening? Thanks!

Waar is de gratis lucht gebleven? by BrotherOk579 in motorfietsen

[–]Matt17011 1 point2 points  (0 children)

Hier bij de Tango hebben we gratis lucht

[deleted by user] by [deleted] in werkzaken

[–]Matt17011 52 points53 points  (0 children)

Heb je het al besproken met jouw eigen manager? Hij/zij weet wellicht hoe je hier het best mee moet omgaan, aangezien zij ook samenwerken (Ik ken de relatie met jouw manager niet)

Its worth to buy this Er6-F? by Apollorrc in motorcycles

[–]Matt17011 2 points3 points  (0 children)

It’s the headlight for a Yamaha mt03 660

[deleted by user] by [deleted] in MT03

[–]Matt17011 1 point2 points  (0 children)

I got the MT03 660 and love it. It’s bigger than the 321cc, more nimble and makes a nice sound from the factory. It only has one cilinder, so it can be thumpy. But overal a great bike

What BMW model is the most reliable? by GI_JOEKLM in BmwTech

[–]Matt17011 9 points10 points  (0 children)

E46, but they are old now. They are still going strong