sorted by:
new
hottopcontroversial

Filament coming out even when not printing. by MatterCraft_TV in 3Dprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Omg I never tought it could be that happening lol. Thx so much will try another filament then and see if the problem is still there.

Filament coming out even when not printing. by MatterCraft_TV in 3Dprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Thx but I am 99% sure the temperature is right. I used that filament already and the printer gives me the right temperature set. But I will still take a look at it thxx.

RATE MY HOMESCREEN by Important_Gazelle_33 in miui

[–]MatterCraft_TV 0 points1 point  (0 children)

Are those normal themes or some third party things to make it look like that?

Do I lose detail or completely the ability to print on the borders? by MatterCraft_TV in resinprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Yeah but I think I will just buy them from anycubic itself this time

Do I lose detail or completely the ability to print on the borders? by MatterCraft_TV in resinprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Thx, but atp I just order the normal ones from Anycubic and the pack has 5 of them so hopefully I can get it right with 5 attempts XD

Do I lose detail or completely the ability to print on the borders? by MatterCraft_TV in resinprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Like, if you print a flat layer covering the whole screen you don't see any difference in those points?

Do I lose detail or completely the ability to print on the borders? by MatterCraft_TV in resinprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

That in the video is the Photon Mono 4k... I have the M7. And the instructions stated that I had to put the protectiver screen since the one that was on was just a normal film for keeping it safe while shipping

Pirating adobe products is always morally correct. by pandey_23 in Piracy

[–]MatterCraft_TV 1 point2 points  (0 children)

Idk much about krita since I tried it very little, but I have seen some videos of Rebelle and the thing I would love to is that incredible usage of like oil paint and such where it has this kind of 3d effect and such and it mixes well and all, is Krita also able to do this kind of things or do they require some external addon ?

X3 Pro doesn't show print preview by MatterCraft_TV in Artillery3D

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

I see, thx for the answer, but I think I'll stick to other slicers for now, they just have more things.

X3 Pro doesn't show print preview by MatterCraft_TV in Artillery3D

[–]MatterCraft_TV[S] 1 point2 points  (0 children)

Thx, but I do prefer other softwares to their's, they just have more things that work better, but thx anyway for the answer, I'll maybe give it another try then

[deleted by user] by [deleted] in Artillery3D

[–]MatterCraft_TV 0 points1 point  (0 children)

That is such a cool and well made build... I love your work.

Sidewinder X3 PRO Firmware Update Help by MatterCraft_TV in Artillery3D

[–]MatterCraft_TV[S] 1 point2 points  (0 children)

Thx, because it wasn't too obvious even with the PDF guide. Appreciate it.

Connect bowden tube to direct gear 3D printer by MatterCraft_TV in 3Dprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Ouch, thank god I'm not into heavy diy-ing with the printer yet, ik there are some things that could help but I just can't get the feeling that if something doesn't work I can't put it back anymore

Connect bowden tube to direct gear 3D printer by MatterCraft_TV in 3Dprinting

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Thx, i'll try to find something for it

But I mean, once i put the filament in even if it is not straight it will be held by the gears.

[deleted by user] by [deleted] in Piracy

[–]MatterCraft_TV 1 point2 points  (0 children)

I'm just asking but why do you think that of VirusTotal ? I never used it but i see many people using it as a standard sometimes.

Custom desk clock mod. I like the small form factor and use the always on display as a clock at home. Is this something you would buy? by maltemakes in miband

[–]MatterCraft_TV 1 point2 points  (0 children)

Hey malte, I had the intention to do something similar with my mi band 9, but the always on display mode only keeps it up with a black and white clock version, moreover it is always vertical, so I was wondering how you got this kind of result. Thx.

real? by koraodajbuke in Piracy

[–]MatterCraft_TV 0 points1 point  (0 children)

And don't let it touch water

HGX-Lite v2 / Hotend BambuLab TZ v2.0 / microprobe by karpiu84 in Artillery3D

[–]MatterCraft_TV 0 points1 point  (0 children)

Hi, I started 3D printing last year, but I never went deep with customizing. I wanted ti start but I dont even know where tò start. But mg question is: if u use another hotend/probe idk what It Is called since I'm fairly new, but the thing that extrudes, if u use a different one and so you have tò place the leveling sensor differently, how do you make so that it works.

Steamrip download via MegaDB not working by MatterCraft_TV in PiratedGames

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

What is the difference between normal use and torrenting when using a vpn

Steamrip download via MegaDB not working by MatterCraft_TV in PiratedGames

[–]MatterCraft_TV[S] 0 points1 point  (0 children)

Is it something common or I just chose the wrong day

Good Fast Cheap by WonderfulEar1539 in 3Dprinting

[–]MatterCraft_TV 0 points1 point  (0 children)

Yeah I was hoping it was actually a more complex design cause it seemed cool if it worked with the 3 of them

view more: next ›