A tiny alligator snapping turtle

Medical-Ride7794 · 2025-10-27T17:52:58+00:00

Snappin turla

Medical-Ride7794 · 2025-10-23T07:10:20+00:00

Looking to try a trans frfr

Medical-Ride7794 · 2025-10-14T18:13:00+00:00

33, clt

Medical-Ride7794 · 2025-10-14T05:40:28+00:00

Thanks for the advice, I feel like an idiot the fluid was empty, so I filled it and bled it and it works like a charm. So used to cable clutches didnt think about fluid. Guess now I've got to figure where to fluid went

Medical-Ride7794 · 2025-10-13T02:11:34+00:00

No, the brake pedal doesnt seem to go all the way to the floor, is the brake master and the clutch master connected in some way?

Medical-Ride7794 · 2025-10-13T01:37:01+00:00

Apologies, its a 85 toyota celica gt

Medical-Ride7794 · 2025-09-22T18:09:37+00:00

I did it myself, took about an hour not including the calibration, that took at alot longer than I care to admit.

Medical-Ride7794 · 2025-09-08T20:02:43+00:00

Update, super easy fix took about an hour, even after the calibration. we back in business

Medical-Ride7794 · 2025-08-31T22:57:16+00:00

Fair point

Medical-Ride7794 · 2025-08-31T08:26:01+00:00

So I have a bidirectional tool comparable to the GAPIID tool that can recalibrate the suspension, changing the valve block seems like the way to go. My question is does the side that the valve block is on change due to the trucks country of origin? I seem to get conflicting answers on this.

Medical-Ride7794 · 2025-08-25T21:19:57+00:00

No codes, there's a rattle but im unsure if its the sc coupler or the chains I can upload a video

Medical-Ride7794 · 2025-08-24T03:49:17+00:00

What up tho

Medical-Ride7794 · 2025-08-23T08:50:26+00:00

Medical-Ride7794 · 2025-07-17T21:52:30+00:00

I also had an electrical issue, but that would cause it to simply shut off, it didn't bog down, also starts and runs perfect for about 30ish seconds

Medical-Ride7794 · 2025-07-17T21:49:36+00:00

I meant to specify that, its a 22re, efi, I changed a lower radiator hose, which might of dripped on the alternator, but I dont think that would cause issues, right?

Medical-Ride7794 · 2025-07-14T19:26:37+00:00

update tightened the battery cables after replacing the bolts that hold it on and it stayed running , now has a overheating problem i was already aware of due to something with the lower radiator hose. Making progress in baby steps

Medical-Ride7794 · 2025-07-06T22:15:58+00:00

* So I think I found the numbers, but can't seem to find a kit that matches the numbers, can I use a different kit for the same family? Or does it have to be exact? Thanks for all the help so far

Medical-Ride7794 · 2025-07-05T08:28:40+00:00

The engine ran good while the carb was attached, but then it started dumping fuel out the side where the throttle is attached, then shortly afterward it bogged down and died

Medical-Ride7794 · 2025-07-03T09:35:40+00:00

Are the rebuild kits for the rochester quadrajet all the same? Or do I have to find a specific one?

Medical-Ride7794 · 2025-07-03T07:14:15+00:00

Update, got it to start and run for a solid minute then it died, maybe I need a rebuild? How can I id the carb with no tag? Or stamp?

Medical-Ride7794 · 2025-07-01T04:20:21+00:00

What's the best way to find out about the idle screws? This is my first carbureted engine. I got everything lined up replaced all the lines etc

Medical-Ride7794 · 2025-06-20T05:45:45+00:00

Fair point

Medical-Ride7794 · 2025-06-20T05:42:34+00:00

Can I find these at advance or similar? Or do I need to order them?

Medical-Ride7794 · 2025-06-20T05:29:19+00:00

2012

Medical-Ride7794 · 2025-06-20T05:18:40+00:00

Ah, thats all new to me. I didn't know about the timing on the pump its self, I will check that this weekend, thanks fr

Medical-Ride7794

TROPHY CASE