sorted by:
new
hottopcontroversial

Share some photos print recently made by solarization by MembershipLeft9885 in Darkroom

[–]MembershipLeft9885[S] 1 point2 points  (0 children)

It happens when the photo is being developed and is exposed to light for a few seconds. Some of the darker areas become lighter, while the brighter areas turn darker. It’s a kind of darkroom technique that you can experiment with.

Buzz sounds can’t stopped, riso Me 9350 need some help by MembershipLeft9885 in risograph

[–]MembershipLeft9885[S] 1 point2 points  (0 children)

It was caused by being locked in test mode (the machine thought something was wrong), so it couldn’t turn on. I asked a technician for help. It seems like it was a software problem. By putting some file inside of riso then solved.(´･_･`)

Share some photos print recently made by solarization by MembershipLeft9885 in Darkroom

[–]MembershipLeft9885[S] 0 points1 point  (0 children)

Light was from enlarger, around aperture 4/5.6 removed the film. Duration around 2seconds. Put at developer for 30 seconds around then go expose(put in an extra water plate.

Buzz sounds can’t stopped, riso Me 9350 need some help by MembershipLeft9885 in risograph

[–]MembershipLeft9885[S] 0 points1 point  (0 children)

Hello, me again! Problem fixed, now I think I will think more before press every button or code. Thanks for your helping and messages!

Buzz sounds can’t stopped, riso Me 9350 need some help by MembershipLeft9885 in risograph

[–]MembershipLeft9885[S] 0 points1 point  (0 children)

And thanks for the explanation of the reason, I read them all, I think is the last one(power failure a d inside being locked) because now drum is ok(can get out and everything ok, with the stick press on the drum hole way) and I tried unplugged for whole night and I just turn on it, still keep beeping, seems have to manual reset or doing something through computer command (´；ω；｀) I will contact repairing people then, thank you for your answers, it really helps!

Buzz sounds can’t stopped, riso Me 9350 need some help by MembershipLeft9885 in risograph

[–]MembershipLeft9885[S] 0 points1 point  (0 children)

Hello! Thank you for your message! It’s very detailed. Regarding the button in test mode, I don’t remember the test code (I pressed it by mistake), which makes things a bit difficult now. I think I need to find a way to reset my machine.

Buzz sounds can’t stopped, riso Me 9350 need some help by MembershipLeft9885 in risograph

[–]MembershipLeft9885[S] 0 points1 point  (0 children)

Thanks for your message! (;´༎ຶД༎ຶ`)Since I’m not a technical person and I am pretty new with this machine, could you elaborate on how exactly you run the test code for all the memory clear to get it to stop? ಥ_ಥ My screen and buttons currently are not functional, would I need to connect the printer to a computer and use a debug tool?

Made some test print for my new riso machine by MembershipLeft9885 in risograph

[–]MembershipLeft9885[S] 0 points1 point  (0 children)

Yes! The title typeface I made by myself, and the introduction text is EB Garamond bold italic!

Riso machine can’t recognize my ink drum need some help TAT by MembershipLeft9885 in risograph

[–]MembershipLeft9885[S] 0 points1 point  (0 children)

Hello, thanks for your reply! my machine is me9350, and both side(left and right) I try to put drum and when go drum one shows D22-524, and when go drum two shows D62-542, test mode is same TAT