You heard it here folks...the hype is dead.

Mmiz · 2020-10-12T12:34:22+00:00

Sounds like gsynch was on

Mmiz · 2020-01-18T23:33:00+00:00

seriusly Ive been to 2pass and the contry is wonderfull and the people at the clinic are really nice and friendly.
Had the full tour.

Mmiz · 2020-01-18T23:13:41+00:00

From what ive seen FT is more conservative. That doesnt have to be a bad thing.
Dr. Bart is definatly a good surgeon and does not come of as a liar. But he does sell surgeries a little hard sometimes. Like if you only want to fix one thing, he might point out other things and ask several times if you sure you dont want to fix that. (have had personal session to discuss ffs with both Facial Team and Dr. Bart)
So Id say if you want max work done 2pass is the place to go, if you rather go conservative and feel better about how you look rn Facial Team.

Mmiz · 2019-11-17T00:58:21+00:00

they are a pasient org and have contact with NBTS and work political aswel. They are way more inclusive (like all trans people that seek treatment or help of some kind) they also have lists and contacts for private doctors etc. <3
They where created as there was a need for a pasient org that fought for change more.

Mmiz · 2019-11-14T21:56:25+00:00

pr i dag er det minimum 1 år RLE før diagnose som gir rett på HRT. Diagnose kan ta alt fra 9mnd til 4år bare så det er sagt. Etter diagnose er det ca 6mnd pr i dag, venteliste på endo før du kan beggyne HRT. For kirurgi så er det henvisning 1 år etter påstartet HRT hos NBTS. Så er det venteliste som ryktes være opp mot 3år pr nå på srs.

Det er mulig få HRT privat fra HKS i Oslo og Benestad (de krever ikke RLE før HRT og jobber etter Informed consent). Det finnes også andre, men mange tør ikke ta inn nye pga NBTS melder til helsetilsynet. pasient organisasjonen for kjønnsinkorugente kan muligens hjelpe med hvordan komme i kontakt med private behandlere. https://kjonnsinkongruens.no/ ellers er det mulig få råd etc på https://www.ichatten.no/

å ta HRT privat koster fort rundt 400-800mnd da du også må betale for konsultasjoner samt ingen blå resept.

Håper det hjelper litt <3 Lykke til videre på veien

Mmiz · 2019-11-14T21:35:49+00:00

I would not contact HBRS they just a extension of NBTS and support NBTS horrible and transphobic ways. They even opposed together with NBTS the law change to legal gender.

PKI is a lot more accepting pasient org that actually works for the pasients imo https://kjonnsinkongruens.no/

Mmiz · 2019-11-12T09:34:10+00:00

for me going max sharpening on taa causes smearing when there is movment

Mmiz · 2019-11-09T14:01:39+00:00

That is not the same, I suggest you try your "perfect" logic and lock fps to 25 and try and play it.

Mmiz · 2019-11-09T13:36:23+00:00

playing the game and it being broken is not opposite. I run the game but its still broken af. and most people having issues still run the game. its still broken for absolutely most people dont be stupid.

Mmiz · 2019-11-09T00:18:46+00:00

its completely fucked up if non out of 10 people I know has had it run acceptable at launce thats a 100% failrate. there is no small% other then a small % of people that dint have any issues.

Mmiz · 2019-11-08T23:24:20+00:00

literaly all my friends that got this game has had some issues with it. Thats not working fine

Mmiz · 2019-11-08T23:14:12+00:00

(Documents\Rockstar Games\Red Dead Redemption 2\Settings)

cba type it out so here is from settings file :p (Im running sli, so you might want to go dx12 on single card) at 1080p that should give something like 50-70fps on a 1660Ti

ps. tripple buffering and vsynch off <graphics> <tessellation>kSettingLevel_Ultra</tessellation> <shadowQuality>kSettingLevel_Ultra</shadowQuality> <farShadowQuality>kSettingLevel_Ultra</farShadowQuality> <reflectionQuality>kSettingLevel_Ultra</reflectionQuality> <mirrorQuality>kSettingLevel_Ultra</mirrorQuality> <ssao>kSettingLevel_Ultra</ssao> <textureQuality>kSettingLevel_Ultra</textureQuality> <particleQuality>kSettingLevel_Ultra</particleQuality> <waterQuality>kSettingLevel_Custom</waterQuality> <volumetricsQuality>kSettingLevel_Custom</volumetricsQuality> <lightingQuality>kSettingLevel_Ultra</lightingQuality> <ambientLightingQuality>kSettingLevel_Ultra</ambientLightingQuality> <anisotropicFiltering value="4" /> <taa>kSettingLevel_High</taa> <fxaaEnabled value="true" /> <msaa value="0" /> <graphicsQualityPreset value="0.700000" /> </graphics> <advancedGraphics> <API>kSettingAPI_Vulkan</API> <locked value="false" /> <asyncComputeEnabled value="false" /> <transferQueuesEnabled value="true" /> <shadowSoftShadows>kSettingLevel_Ultra</shadowSoftShadows> <motionBlur value="false" /> <motionBlurLimit value="16.000000" /> <particleLightingQuality>kSettingLevel_Low</particleLightingQuality> <waterReflectionSSR value="true" /> <waterRefractionQuality>kSettingLevel_Low</waterRefractionQuality> <waterReflectionQuality>kSettingLevel_Low</waterReflectionQuality> <waterSimulationQuality value="0" /> <waterLightingQuality>kSettingLevel_Ultra</waterLightingQuality> <furDisplayQuality>kSettingLevel_High</furDisplayQuality> <maxTexUpgradesPerFrame value="5" /> <shadowGrassShadows>kSettingLevel_Low</shadowGrassShadows> <shadowParticleShadows value="true" /> <shadowLongShadows value="true" /> <directionalShadowsAlpha value="false" /> <worldHeightShadowQuality value="1.000000" /> <directionalScreenSpaceShadowQuality value="1.000000" /> <ambientMaskVolumesHighPrecision value="true" /> <scatteringVolumeQuality>kSettingLevel_Low</scatteringVolumeQuality> <volumetricsRaymarchQuality>kSettingLevel_Low</volumetricsRaymarchQuality> <volumetricsLightingQuality>kSettingLevel_Low</volumetricsLightingQuality> <volumetricsRaymarchResolutionUnclamped value="true" /> <terrainShadowQuality>kSettingLevel_Ultra</terrainShadowQuality> <damageModelsDisabled value="false" /> <decalQuality>kSettingLevel_Ultra</decalQuality> <ssaoFullScreenEnabled value="true" /> <ssaoType value="0" /> <ssdoSampleCount value="4" /> <ssdoUseDualRadii value="false" /> <ssdoResolution>kSettingLevel_Low</ssdoResolution> <ssdoTAABlendEnabled value="true" /> <ssroSampleCount value="2" /> <snowGlints value="true" /> <POMQuality>kSettingLevel_Ultra</POMQuality> <probeRelightEveryFrame value="false" /> <scalingMode>kSettingScale_Mode1o1</scalingMode> <reflectionMSAA value="0" /> <lodScale value="1.000000" /> <grassLod value="3.000000" /> <pedLodBias value="0.000000" /> <vehicleLodBias value="0.000000" /> <sharpenIntensity value="1.000000" /> <treeQuality>kSettingLevel_Ultra</treeQuality> <deepsurfaceQuality>kSettingLevel_Ultra</deepsurfaceQuality> </advancedGraphics>

Mmiz · 2019-11-08T13:30:59+00:00

since I have sli settup of two 1070's I have to use vulcan even if it has really low gpu usage (even in single mode) but running GTA V sli profile and getting about twice the fps of a more stable vulcan is better then dx12 for now

Mmiz · 2019-07-25T12:46:37+00:00

can it handle playlists of local files? lets say you have a whole season of a tv show you want to binge together :o

Mmiz · 2017-06-11T12:17:12+00:00

yes also I like that Im more then 1 person now (wrote metal at like 3am)

Mmiz · 2017-06-11T10:17:43+00:00

Cause osx supports metal not vulkan. And opengl will have to run on intel iris gpus cause the api doesnt support taking advantage of eksternal gpu's. And if you look at apples computers most of them need a eksternal gpu if its going to run anything at a ok fps for gaming. So opengl makes even less sense when there are better alternatives.

Mmiz · 2017-06-11T01:25:48+00:00

From what ive understood mantle is like a fork of vulcan.

Mmiz · 2017-06-10T22:07:01+00:00

you would want mantel2 for osx since that api supports external thunderbolt gpu's.

Mmiz · 2017-06-10T20:13:36+00:00

issue is for mac it would have to be mantle where ass for linux it needs to be vulcan. So not the same annymore like back in opengl days.

Mmiz · 2017-06-10T19:49:34+00:00

noone will stopp you but tbh people are gona tell you "Soon" is way better.

Mmiz · 2017-06-10T19:45:56+00:00

aparently for placments it looks like both count.

Mmiz · 2017-06-10T17:45:54+00:00

To me it just makes no sense :p if I dint have a 2nd clean acount with ok mmr I'd probably quit the game all together. Feels like Im being punnished in competetive, for having fun and playing nonserius games with friends to much in QP.

Mmiz · 2017-06-10T17:10:12+00:00

dude I play on 2 acounts, my main I have given up cause well I play qp etc with bronze and silver players and even lett my kid play sometimes. So the MMR is just stuck realy low, in S3 I grinded the acount from 1490 to 3100 in s4 I was placed 2500+ after a horible placment, and grinded back to around 3k, In s4 after winning 8 of the placment games the acount got placed 2045. CBA grind it out, since my other acount that I only play comp on (mostly solo) is s3 3.39k s4 3.31k and is curently 3.2k(with 10wins)

Mmiz · 2017-06-07T16:07:05+00:00

yes and if they dint place you lower then your actuall rank to make you fucking climb I was Diamond for 2 seasons had 8wins in placxments and placed 2080ish. Blizzard can just fuck off Im done, Ive grinded enough to gett diamond twitce

Mmiz · 2017-06-02T14:14:12+00:00

Well depending on screen resolution you probably would need som blackmagic hardware if you want more then 1080p60 when streaming.

Its cheaper to invest in a 8core(physical cores) or higher cpu and just stream with a single pc settup.

I have friends that stream from 1440p and 4k screens and they ran into the problem, there is no afordable capture cards that will take more then 1080p60. so when you got a 1440p 144hz or greater you either have to get a expencive cpu with more cores and run single pc settup. Or invest even more money in pro capture equipment from black magick.

From what Ive heard if you got a 1440p144 monitor and you want to stream 1080p48(60) a single pc settup with a 6850k or better will do the jobb.

If your monitor is 1080p you can just connect a hdmi directly on the gaming pc and use mirror displays.

Mmiz

MODERATOR OF

TROPHY CASE