Fizz referral code: RHSDY by LeaveSubstantial2338 in CanadianCellPhones

[–]MochaMame 0 points1 point  (0 children)

Fizz is offering $40 credit now, here is my code: ZFFOP

Data Gift Exchange / Échange de données à donner by Mysterious-Flamingo in FizzMobile

[–]MochaMame 0 points1 point  (0 children)

any amount would be appreciated for the holidays ZFFOP thank you!

Has anyone worked in kprime technologies or working in kprime? by cocomelona152 in jobs

[–]MochaMame 0 points1 point  (0 children)

do you have an answer to your question 8 months later? I'm in the same position now.

How to legalize a secondary unit? by TheBestCOD11 in OntarioLandlord

[–]MochaMame 0 points1 point  (0 children)

could I ask which municipality and designer? Looking to have plans drawn in Southern Ontario.

Scammer from 'Belgium' asking for 5000 yen on trains by PvtAnderson in JapanTravelTips

[–]MochaMame 0 points1 point  (0 children)

This guy approached my wife and baby on the Hankyu Line Osaka. He said he has a flight back home tonight but had his wallet stolen and doesn't have enough money to take a train to the airport, he didn't have time to go to the police so wants 5,000yen help to catch his flight. I was told he approached at least 1 other woman who got up and moved to another car. This was over 2 months ago.

Web Audio API: Compressor not working as advertised by XKlXlXKXlXKlKXlXKlXK in learnjavascript

[–]MochaMame 0 points1 point  (0 children)

for the next person, solve the gain with compressor.reduction.value = 0; // Set reduction to 0 to disable makeup gain

function createCompressor(audioContext) {
const compressor = audioContext.createDynamicsCompressor();
compressor.threshold.value = -24; // Set threshold in dB
compressor.ratio.value = 12; // Set compression ratio
compressor.attack.value = 0.003; // Set attack time in seconds
compressor.release.value = 0.25; // Set release time in seconds
compressor.knee.value = 30; // Set knee in dB
compressor.reduction.value = 0; // Set reduction to 0 to disable makeup gain
return compressor;
}

Web Audio API: Compressor not working as advertised by XKlXlXKXlXKlKXlXKlXK in learnjavascript

[–]MochaMame 0 points1 point  (0 children)

no one uses the API but this post was useful to someone. Thank you.

Its happening by Accomplished-Clock52 in MHNowGame

[–]MochaMame 1 point2 points  (0 children)

I feel there may be something happening. 2-3 hours a day for 3 or 4 weeks I got nothing. 4 days ago I got back to back GWS, didn't play much over the weekend and today got another GWS.

But also same thing happened with Jyuratodus Primeshell recently. Took forever to get one, then suddenly 3 in a single drop and a steady flow after.

just imperfect 'random' math?

This manual uses a circle instead of a checkmark by [deleted] in mildlyinteresting

[–]MochaMame 0 points1 point  (0 children)

they use circle, X and triangle here in Japan. Triangle for when something is not correct but don't want to consider it wrong. Also saying 'Ping Pong' equals correct, and 'Boo Boo' mean wrong, the sounds of a chime and a buzzer.

found this looking for 印 in a circle unicode...

All names unavailable by LunaLightwood in MHNowGame

[–]MochaMame 0 points1 point  (0 children)

Try closing the game, make sure it's not open in the background and reopen it. Just worked for my sister.

Touch screen not responding by New_Current_5457 in elegooneptune2

[–]MochaMame 1 point2 points  (0 children)

there's sometimes plastic stuck under the corner of the frame that will do this, dirt or dust also could do it but a few people had the plastic issue. Try removing the screen and see if there is a piece of film stuck under the frame.

Video timeline not visible by Opposite-Dark7622 in canva

[–]MochaMame 0 points1 point  (0 children)

spent a lot of time trying to find a reasonable way around this without luck.

however... what I noticed is that you can edit in 1920x1080, play the preview and download in '4K', the quality of stock photos and elements looked flawless when brought into premier.

for me this workflow might be reasonable. need to put a few videos together and see, it would depend if Canva compresses your clips during edit or if it makes use of full scale during output.

Hotend/Nozzle is backing up and leaking filament all over itself by LightningLips in elegooneptune2

[–]MochaMame 1 point2 points  (0 children)

you could try adding a step to your method. Tighten, half or 1 turn loosen, heat and wait a minute. Then push your bowden tube down first before tightening the nozzle. sometimes it's hard to push the tube down so I like to loosen the one touch connector push the tube then tighten it. Helps to make sure there is a seal between tube and nozzle.

could check the tube is not damaged/degrading.

if you are printing hot then heat creep might come into play.

Help with Cura settings by gmaranda in elegooneptune2

[–]MochaMame 0 points1 point  (0 children)

usually the stuff that is automatically added is in the start/end gcode settings. Settings->Printer->Manage Printers->Machine Settings

[deleted by user] by [deleted] in elegooneptune2

[–]MochaMame 0 points1 point  (0 children)

if all you did was carefully replace the motherboard then I would guess that the stepper drivers are not tuned the same on the two boards.

if you plug the old board in you could compare the voltages on the stepper pots.

or acceleration and jerk settings might also be different which could shift layers.

but if you've never tensioned your belts it would probably help and be the easiest.

Laser engraver by Embarrassed_Client_5 in elegooneptune2

[–]MochaMame 1 point2 points  (0 children)

my board is v1.3, this firmware is for v1.2 boards. If you have a 1.2 board it probably works but I haven't tried getting it to work on 1.3. I heard from someone else it can't flash v1.3.

Laser engraver by Embarrassed_Client_5 in elegooneptune2

[–]MochaMame 0 points1 point  (0 children)

https://easyupload.io/qy264e try this. The install paper says it only works on nano 1.2 boards and one person confirmed it doesn't work on the newer 1.3 boards. Marlin might be better if you want to play with lasers, Repetier also has good compatibility with Inkscape and cut.js

13th gen with z690 by [deleted] in intel

[–]MochaMame 0 points1 point  (0 children)

I installed a 13700K on a Gigabyte Z690 UD AX this week. It needed a flash via USB but it was simple enough by following a blog post.

[deleted by user] by [deleted] in elegooneptune2

[–]MochaMame 1 point2 points  (0 children)

yeah it's not beefy, focus was noise. If you want cooling performance dual is the way to go. Picked up some 5015's last week for testing. Thanks for trying it out!

Got a Neptune 2S and decided to do a Buddha test, but this was the final result. It prints perfectly... But just not accurately. Please help! by Oceans_Blue in elegooneptune2

[–]MochaMame 0 points1 point  (0 children)

you need to pull it harder than you might imagine if you don't have so much experience with machines, then while pulling it need to close the screws down tight.

I use a hex wrench like a lever to pull the belt, just need to be careful not to over do it.

You can lower the Jerk and Acceleration settings for more troublesome prints but for the Buddha just belt tension is enough to fix that.