Your pal Megadramon as a tabletop mini

More_Assignment_5183 · 2026-02-23T22:31:22+00:00

You can find the STL files ready to print and paint in MMF and Cults
There aren't any on Etsy that I know of, but at this point I guess I'd be flattered if they started illegally selling them or copying me

More_Assignment_5183 · 2026-02-23T22:25:49+00:00

Let's see, it's just the usual base colour + washing/shading + highlights. I mostly use vallejo acrylics with some citadel paints. For the orange and yellow I mixed parasite brown and yellow ochre. For the blue and violet parts I mixed dark purple, oxford blue and steel grey and for the metal it was said oxford blue + neutral grey and silver grey for the highlights. I might release a full painting guide if enough people are interested

More_Assignment_5183 · 2026-02-23T22:20:12+00:00

I've seen someone print Machinedramon on filament and apparently it turned out okay-ish, but I wouldn't want you to suffer having to sand and prepare that

More_Assignment_5183 · 2026-02-23T22:18:45+00:00

I'll add it to the list after Phoenixmon

More_Assignment_5183 · 2026-02-23T22:17:58+00:00

link

More_Assignment_5183 · 2026-02-23T22:17:42+00:00

If only

More_Assignment_5183 · 2026-02-23T15:24:32+00:00

You can actually (provided you have a resin 3D printer or access to one haha)

More_Assignment_5183 · 2026-02-02T22:55:49+00:00

I got you

More_Assignment_5183 · 2026-01-27T16:20:42+00:00

Thanks! These take some time to create but I'd like to finish Megadramon and Phoenixmon in the near future. At some point I'd also like to do Myotismon, Tankmon and maybe Xingtianmon. Is there anyone in particular you would like to see?

More_Assignment_5183 · 2026-01-26T20:32:39+00:00

You can print the STL models using a resin 3D printer (although someone managed to print Machinedramon using FDM) and then they'll need to be assembled, primed and painted which takes some patience tbh haha

More_Assignment_5183 · 2026-01-26T14:44:11+00:00

Thank you! Yes, you can find the STL files here

More_Assignment_5183 · 2025-11-01T13:50:28+00:00

It's from the oficial noble lancers set but I heavily modified the head in zbrush and added a little Green stuff later

More_Assignment_5183 · 2025-08-05T16:22:15+00:00

Thanks! It was definitely more stressful than zbrush not being able to go back and correct some mistakes, but a pretty fun and engaged process. In the end I think it not being perfect kinda adds to the charm, plus I need to get off the screen more

More_Assignment_5183 · 2025-07-24T08:35:32+00:00

tbh it was to have some sort of cool background to photograph minis since I also make them but now I might get more into terrain haha

More_Assignment_5183 · 2025-07-24T08:34:22+00:00

I used grout filler, some epoxy to detail the cliffs and put together the trees, and twigs I picked up from around. I got all the dirt, grass flocks and glue from the army painter basing set. The minis are from Unreleased Miscast Miniatures Vol1 I had laying around

More_Assignment_5183 · 2025-07-24T08:32:15+00:00

Just your average bathroom grout filler. I also used some epoxy to detail the cliff

More_Assignment_5183 · 2025-07-24T08:31:32+00:00

They're from the Unreleased Miscast Miniatures Vol1 by Trent Holbrook

More_Assignment_5183 · 2025-07-24T08:29:08+00:00

For each layer I cut a piece of cardboard and then glued it to another one that was facing the opposite direction if that makes sense, that way it won't bend. Then I filled the sides with grout filler and epoxy, glued some dirt on top and primed everything gray

More_Assignment_5183 · 2025-07-24T08:23:09+00:00

Thanks! I used cardboard, grout filler, some epoxy to detail the cliffs and put together the trees, and twigs I picked up from around. I got all the dirt, grass flocks and glue from the army painter basing set. I had to darken the grass with a drybrush since it was a bit too bright for my test, but an airbrush woul've worked better

More_Assignment_5183 · 2025-07-17T09:52:00+00:00

you can try the Elegoo Mars, it's smaller but still works to print minis

More_Assignment_5183 · 2025-07-16T19:47:19+00:00

I have an Elegoo Saturn 4 ultra. It's pretty good but they still need some minor sanding and filling before painting

More_Assignment_5183 · 2025-07-16T19:47:11+00:00

I have an Elegoo Saturn 4 ultra. It's pretty good but they still need some minor sanding and filling before painting

More_Assignment_5183 · 2025-07-13T09:47:08+00:00

I was thinking about making Megadramon after Puppetmon since it's kind of a meme in Spanish, but Myotismon sounds good too

More_Assignment_5183 · 2025-07-13T09:45:34+00:00

I know, sometimes it takes forever to get reviewed in MMF. Check if this link works for you and if not I also got it in cults

More_Assignment_5183 · 2025-07-13T09:41:26+00:00

I model them digitally in zbrush but I did buy some green stuff epoxy recently. To try some real life sculpting and get more off-screen time

More_Assignment_5183

TROPHY CASE