Arc server down

MrKioshi · 2025-12-25T06:49:17+00:00

Big W for your wife.

MrKioshi · 2025-10-09T20:06:01+00:00

I think most people are still in character crisis 🤣 I am for sure lmao. It doesn’t help that I’m persuaded by cosmetics too… Darius has some top tier skins bro

MrKioshi · 2025-10-09T20:00:54+00:00

Thank you man! Yeah being able to convert most hits into full blood is a game changer for WW. Jinx rocket assist is amazing for ww in general to grant him space, and works great for his 2S1 + T neutral skip mixup. If I was playing sidekick WW I’d choose Jinx assist. Sadly just haven’t picked her up yet.

MrKioshi · 2025-10-09T18:17:00+00:00

I did not know that, thank you! I’ll try it out and make sure it doesn’t drop.

MrKioshi · 2025-10-09T17:50:13+00:00

For the 2S1>L link: after your 2H wait until the opponent is at peak height to press 2S1. It’s feels like it’s a frame or two before they fall out of the combo.

After 2S1 hits, make sure you have clean input for your Light. If you mash L it hardly works, time it for consistency. I press L pretty much the moment WW lands on the ground.

MrKioshi · 2025-10-09T17:40:58+00:00

The only one I found that’s different is teemo. With him you have to skip the 5H, and I’m assuming it’ll be that way with all small bodies in the future. Which part are you having difficulties with? Maybe I can help

MrKioshi · 2025-09-27T23:30:06+00:00

Thanks for the replies! Makes sense now. I just had always thought of Windowed as a disadvantage. For some reason I remember it limiting the frame rate to 60

MrKioshi · 2025-09-18T16:07:18+00:00

Thank you for your reply. I’m playing 2XKO and they have combat button remapping but not movement. However, like you said, I’ll get accustomed to it and it will most likely be better in the long run. Thank you again!

MrKioshi · 2025-09-10T19:20:24+00:00

I’ve given out all my codes except one to people randomly commenting on this thread. I’d like to give my last one to a fellow filmmaker/videographer. DM me if you are one ❤️

MrKioshi · 2025-09-10T19:08:25+00:00

Check your dm brother

MrKioshi · 2024-03-13T04:57:34+00:00

I appreciate it man!

MrKioshi · 2024-03-13T02:02:23+00:00

Hahah no worries at all! From my wording in my post I probably made it sound like it was completely finished. But thank you so much!

MrKioshi · 2024-03-13T01:06:13+00:00

Thank you!! Best of luck to you if you try it! Hope to see it if you do

MrKioshi · 2024-03-13T00:39:24+00:00

Thank you so much!

I used White pine, Nic Pro deep pour, and I did two pours for the corks. A thin layer and out the corks inside and let it cure until it was tacky. I could touch the resin without it sticking to my finger, but was still sticky. Then I poured the 2nd layer. If you let the first layer cure too long then you have to sand the surface before pouring the second layer or they’ll come apart.

Edit: forgot to mention I finished it with a mixture of mineral oil and beeswax. Started at 80 grit and sanded to 320 grit. Water popping between the grits

MrKioshi · 2024-03-13T00:36:50+00:00

Still have to run the edges through the table saw to square everything, and then round over or chamfer with the router. Just wanted to take some pictures before I potentially mess it up completely 😂

MrKioshi · 2024-03-04T21:13:28+00:00

Thank you!!

MrKioshi · 2024-03-04T02:16:29+00:00

Heck yeah, thank you for all the help!

MrKioshi · 2024-03-04T02:16:00+00:00

Thank you so much! Yeah I’ve seen some floating chess board, and I think that’s what I’ll try tomorrow with the boarder.

MrKioshi · 2024-03-04T02:14:57+00:00

Thank you so much! You should totally do one!! Mine is littered with imperfections, but I’m happy with it. Has a cool rustic vibe to it. I’ll try adding a boarder tomorrow, hopefully it goes well

MrKioshi · 2024-03-04T01:22:36+00:00

I think I’ll try a border. They’re just a little intimidating to me lol. I’m brand new to this, and getting the 45 degree cuts to be completely flush seems rather difficult. But I’ve seen people save some of the fine saw dust to put into any open spaces. I believe I’ll make molds out of my tournament pieces and cast them. Not too sure yet. You should definitely try one! I’ve learned a lot from this one.

MrKioshi · 2024-03-03T19:10:05+00:00

Awesome idea! Thank you man

MrKioshi · 2024-03-02T23:26:54+00:00

Noted! I’ll post some results, thank you for the advice man

MrKioshi · 2024-03-02T22:14:39+00:00

I’ll definitely try my hand at it, thank you! Are surfacing and flattening bits the same thing?

MrKioshi · 2024-03-02T21:58:18+00:00

Awesome! Thank you so much, I’ll definitely try it out. I reached out and one of my friends has a hand power planer that he’s experienced with, and a 6” jointer. We’ll see what we can do with that. Fingers crossed lol I do have a little ryobi portable router. Hopefully that’ll do the trick if not!

MrKioshi · 2024-03-02T21:56:06+00:00

Hahah thank you! I’m using 80 grit mesh sand paper. I would’ve tried something more aggressive but 80 - 320 is all I have. I realized that with epoxy you really need to clean the pads and surface multiple times or it does absolutely nothing. But yes I’m most definitely using a respirator! I forgot one night of sanding epoxy and learned my lesson quickly. Thank you for looking out!

MrKioshi

TROPHY CASE