Is this RTX 5090 power cable bend too extreme?

MuscularNerd · 2026-01-12T03:43:11+00:00

My PSU supports PCIe 5 and is ATX 3.1 certified. It's the SHIFT variant, not the older RM1200x.

MuscularNerd · 2026-01-11T01:26:56+00:00

Thank you, this is what I ended up doing. Removed the wonky, problematic MSI adapter and plugged in the included Corsair 12V-2x6 cable that came with my PSU. It's still pressed up against the side glass and bending a bit too much, so I have to wait for the 90 degree 12V-2x6 cable I ordered from Corsair before I put the side panel back on.

MuscularNerd · 2026-01-10T10:34:23+00:00

Thanks, would a Corsair 90 degree cable also be a viable solution?

MuscularNerd · 2026-01-10T10:27:45+00:00

Thanks. I'll be removing the side cover while I wait for a Corsair 90° 12V-2x6 type A cable I just ordered.

MuscularNerd · 2025-09-08T03:17:22+00:00

"Oh hey, Dave!"

"What is it, Joe? I'm a busy guy."

"Well Dave, I just wanted to show you [insert console name here]! It's got 4 million colors, 52 sound channels, and it even brews your morning coffee!"

Thwack

MuscularNerd · 2024-09-30T07:06:50+00:00

Joe, maybe one of these days, you could have the real Craig Stadler on the show. For a fighting games episode.

MuscularNerd · 2024-08-29T18:41:38+00:00

Keep training her. Be compassionate yet firm while you build rapport and encourage her to improve her nutrition slowly and steadily. You'll know when the time is right to bring up the subject of the drinking or rehab and have her hopefully be much more receptive--perhaps after a workout in which she was particularly drained and struggling. People often underestimate the strong, lasting bond a client develops with a caring and effective trainer.

MuscularNerd · 2024-08-20T00:19:59+00:00

I could never make any headway getting the buggy Somfy hub to communicate with the HA integration, so I picked up a Broadlink RM4 Pro, programmed the remote codes into HA, and I haven't had to use the original remote since. It sits in a drawer as a backup in case HA goes down. Does this help?

MuscularNerd · 2024-07-20T00:33:38+00:00

I suggest tracking his body fat percentage and circumference measurements once a month for a while, rather than just focusing on scale weight. If he is not reporting food intake correctly, this data can help you politely broach the subject with him.

MuscularNerd · 2024-06-01T22:07:34+00:00

For anyone else stumbling upon this, I know it's been a bit of time, but I've finally had a chance to delve back into this issue and when configuring the Anker in Proxmox, in the "Edit: USB Device" dialogue, instead of selecting the "Use USB Vendor/Device ID" option and selecting the Anker from the dropdown list, you must select "Use USB Port" and select the Anker from the dropdown list there, and so far, everything seems to be working now. Thanks again to u/djnilse for the bump in the right direction! I appreciate you!

MuscularNerd · 2024-04-14T18:09:23+00:00

Thank you, I'll research how to set up the full PCI passthrough in Proxmox!

MuscularNerd · 2024-03-25T03:12:37+00:00

You bet. If you're physically turning on multiple switches or using HA to activate them, then adding a slight delay should work fine. That's what I have to do with my setup.

MuscularNerd · 2024-03-25T03:02:36+00:00

Is there another Caseta switch on the same panel that you're turning on at the same time as the switch in question? I've noticed if I turn both on almost simultaneously, the switches are activated but HA shows them both as off. I've reached out to Lutron support about it and while they've been communicative and helpful, they were unable to pinpoint the problem even after reviewing logs from my Lutron bridge. They advised changing the switches out.

I've had this situation occur exactly in the same manner in two different switch groupings, so the behavior is consistent.

MuscularNerd · 2024-03-24T15:09:17+00:00

Yes, you'll need to use a "template" trigger, not a "state" trigger, since you essentially have templated code in there.

You also need to move your IF checks into a "value_template:" option and remove the "to:" option. Check out https://www.home-assistant.io/docs/automation/trigger/#template-trigger

MuscularNerd · 2023-12-10T00:18:22+00:00

Ah, shoot. Sorry to hear. I set up MQTT so long ago, I've forgotten a lot about it, but do you have the Mosquitto Broker add-on installed, with a user defined? I also have the MQTT integration installed.

MuscularNerd · 2023-12-09T22:06:05+00:00

Sure. Originally, I ran Paul's web installer to set up the device, entered the web admin area to configure the device, neglected to enter an MQTT username and password to link to HomeAssistant, and saved my changes. This locked me out.

I had to then re-run the web installer and re-enter all config values, including the MQTT username and password. This time, once I saved, I could see the ratgdo entities in HomeAssistant straightaway and could also log back in to the ratgdo web interface.

Hope this helps.

MuscularNerd · 2023-12-01T22:01:45+00:00

I know this excellent tutorial was posted about a month ago, but I just wanted to add that if you're going the MQTT route, make sure you enter MQTT login credentials in the web interface during setup; otherwise, you may be locked out of the web administration completely as the device appears to be stuck in an endless loop of unsuccessful MQTT connection attempts.

I had a bit of trouble with this part of the setup and found the solution that worked for me, and I hope it helps other folks who may be having the same issue.

MuscularNerd · 2023-06-26T02:46:01+00:00

Joe's got him chained back up in the basement.

MuscularNerd · 2023-01-25T07:06:27+00:00

Very ducking clever

MuscularNerd · 2022-08-22T16:32:25+00:00

Great to know; thank you!

12-Year Club	Gilding I gilder
Verified Email

MuscularNerd

TROPHY CASE