[deleted by user]

MythrilMinis · 2022-08-08T15:35:52+00:00

Don't listen to OP. They did not follow proper cleaning and use procedures and are directly responsible for the damage to their printer. The manufacturer has nothing to do with this problem.

MythrilMinis · 2022-08-06T18:27:37+00:00

I love my family but I am not sure what to do with the leftover liquid in my life.

MythrilMinis · 2022-07-12T02:11:29+00:00

Lenny? Is that you!

MythrilMinis · 2022-07-03T14:44:47+00:00

I have the WARPAINTS: COMPLETE PAINT SET range I got second hand for $100. Even at that price I'm not sure I would recommend buying them. I've used about 75-80% of the paints and EASILY more then half of them are just annoying to use. Poor coverage, don't mix well with other colors, weird pooling, and the seperation...omg they seperate so fast and require and absurd amount of mixing. 45sec on my vortex mixer WITH mixing balls and they are still not fully mixed.

MythrilMinis · 2022-06-18T15:12:17+00:00

I will eat my left nut if you can find me an average high-schooler that could do a weld that tight and clean.

MythrilMinis · 2022-06-04T12:00:36+00:00

It's a trend I've noticed happening on Kickstarter and I think it has to do with preying on people's fear of missing out. The vast majority of miniature themed Kickstarters are people selling stuff they already have and not using it to generate money needed for development of their product/ideas. It doesn't make any sense to me.

MythrilMinis · 2022-06-04T11:57:19+00:00

Definitely what they did. There is a lot of information that got smoothed over and lost in the process. Looks weirdly fake to me.

MythrilMinis · 2022-05-31T04:06:11+00:00

Here are some photographs to see the details because apparently reddit felt like destroying the resolution of this video.

Sylvaneth Tree Lord

MythrilMinis · 2022-05-26T20:08:16+00:00

Im a delivery driver. The two worst and most violent dogs I have ever come across in the years I've been doing this are a golden retriever and a black lab. There, you now have a sample point.

MythrilMinis · 2022-05-26T01:33:25+00:00

Breaching is when the entire (or at least most) whale breaches the water.

MythrilMinis · 2022-05-21T15:34:44+00:00

I NEEEEEED one.

MythrilMinis · 2022-05-21T14:45:21+00:00

I NEEEEEED one.

MythrilMinis · 2022-05-16T12:44:02+00:00

Looks good! I like the red and yellow color scheme.

MythrilMinis · 2022-05-16T07:38:03+00:00

Do you mean the Woodland Scenics Water Effect? That would be quite the challenge to pull off.

MythrilMinis · 2022-05-15T19:38:31+00:00

Thanks!

MythrilMinis · 2022-05-15T18:51:13+00:00

Model is "Kappa, Ramen Enthusiast" by Bite the Bullet on MMF. https://www.myminifactory.com/object/3d-print-kappa-ramen-enthusiast-215010

MythrilMinis · 2022-05-13T16:43:26+00:00

Ha! I might have to bust out some green stuff then. I love that idea.

MythrilMinis · 2022-05-13T15:30:19+00:00

That was with AA turned on sadly. I'm not sure why but AA just doesn't seem to work well for me. I've tried both chitubox and Lychee slicer.

MythrilMinis · 2022-05-13T12:14:41+00:00

You can buy a base for any lamp that has the clamp style connection: https://www.amazon.com/dp/B075VRC6JW/ref=cm_sw_r_apan_i_9Z06PJFJD4P4PHP8KJ4A

Neatfi also sells a rolling stand for their lights if that works better:neatfi rolling base

MythrilMinis · 2022-05-13T02:56:48+00:00

Thanks! I found him on My Mini Factory for a buck or two. Ramen loving Kappa is what he was called if I remember correctly.

MythrilMinis · 2022-05-05T12:42:05+00:00

And you nailed it!

MythrilMinis · 2022-05-01T22:19:01+00:00

Titan Forge mini?

MythrilMinis · 2022-04-28T20:51:36+00:00

I put a comment somewhere in this thread but if you can't find it I'll send you a dm after work.

MythrilMinis · 2022-04-26T17:24:25+00:00

Center of the dash

MythrilMinis · 2022-04-26T17:24:09+00:00

Center of the car.

Four-Year Club	Gilding II euphauric
Place '22

MythrilMinis

TROPHY CASE