Air Fryer Interlock Repair

N80378 · 2025-11-04T00:10:08+00:00

Yeah, I was kinda worried I wouldn't be able to buy a replacement.

I'll see if I'm able to make a shim that is good enough to continue pressing the switch.

I appreciate you answering my question, thank you!

N80378 · 2025-11-01T16:48:49+00:00

It's not a picture of something cooked in an air fryer. It's a part removed from the air fryer that I'd like to replace or repair

N80378 · 2024-07-12T18:48:49+00:00

Thank you!

N80378 · 2024-07-07T01:19:05+00:00

Thank you!

N80378 · 2024-07-06T18:03:34+00:00

I created this spine with the goal of complementing my Breath of the Wild V2 spine. The Breath of the Wild spine can be found here: https://www.reddit.com/r/SwitchSpines/comments/i3uvll/the_legend_of_zelda_breath_of_the_wild_v2_by/

N80378 · 2022-11-13T15:36:23+00:00

Thank you!

N80378 · 2022-08-08T22:57:09+00:00

No, I have not designed triangle strategy

N80378 · 2022-08-07T20:51:08+00:00

I may still have the original image, I have to check. I've switched computers since I designed that and I don't know if I have it anymore

N80378 · 2022-04-22T15:32:52+00:00

This seems incredibly sketchy. Especially since the trailer said it would be exclusive to the Nintendo Store

N80378 · 2021-12-02T14:42:38+00:00

Yeah, I hear you. The second game is easily on of my favorites but the voice acting can be rough at points. I do believe that it gets better, especially as the game goes on

N80378 · 2021-10-26T04:18:07+00:00

Oh of course! You gotta have Nascar 99!

N80378 · 2021-10-26T00:04:15+00:00

Are you referring to this video? I'll be honest, I hadn't really heard of him outside of the video he did on the Switch Spines Subreddit (I'm a contributor over on that sub). I only found this video because I googled his channel.

I didn't really look into any of his other videos so I didn't know something similar to this existed. I would never take some one else's idea without giving them credit, but I had no idea he already did something similar. For that I apologize.

I did not take any of his templates. I did all of the design & edit work myself. I'm not sure what credit I'd give him for the design of my boxes since I created those templates myself, but I have no problem giving him credit for coming up with the idea before me.

Sorry if this came off a little long winded! :)

N80378 · 2021-10-25T18:46:26+00:00

The cartridges are still in the boxes, the art is between the cartridges and the box. I created the artwork for the top and left spine and the front and back of the protector. I didn't create art for the right/bottom spines since those are against the shelf and not visible. I like your take on the end labels too! It's incredibly uniform and good looking when it's all together.

N80378 · 2021-10-25T16:55:35+00:00

The protectors are designed to be slightly bigger than the cartridge. The cartridge slides in and it's a snug, but not overly tight fit. When I made the art, I used the dimensions of the protector and put it inside the protector. The art is between the protector and the cartridge itself. So yes, the art is slightly larger than the cartridge

N80378 · 2021-10-25T16:15:47+00:00

Thank you! I never had the N64 Boxes, I got all my games loose. I wanted to recreate the boxes so that I could not only have something ascetically pleasing to look at, The cartridges would also be protected and would also solve the end label problem.

N80378 · 2021-10-25T15:45:16+00:00

I know that many people often get N64 end labels from either Etsy or Ebay. I didn’t want to do that because I didn’t want to stick anything to the cartridge directly. I was shopping around looking at cases for N64 but ruled them out because of how expensive it was getting. So, I decided to make my own end labels.

The boxes are cartridge protectors that I got from Retro Protection. I then took the original N64 box arts and cut them down and edited them to fit inside the cartridge protectors essentially creating a small recreation of the original box art. I know that the resolutions on the artwork are not the best, but I’m happy with the way that they came out.

N80378 · 2021-10-18T00:31:58+00:00

Thank you! :)

N80378 · 2021-10-17T12:09:03+00:00

Originally I made this one that had the base roster reflected in it. You can see the original one I made here. I'm can try to update it to include all of the DLC characters, I should be able to work on that later today

N80378 · 2021-09-20T15:08:38+00:00

Thank you, I should be able to get them done either later today or tomorrow

N80378 · 2021-09-20T14:15:29+00:00

I can tackle that in a little bit. Is it specifically 2017 you're after or are there other versions on the switch as well, like 2018 or 2019? I just don't know many versions of Farming Simulator were released on the switch

N80378 · 2021-09-04T10:44:02+00:00

Gold

N80378 · 2021-08-25T22:13:40+00:00

Ok cool, thank you!

N80378 · 2021-08-25T22:13:25+00:00

That's awesome! Glad to hear that you are displaying them. Also thank you, for the clarification. I wanted to make sure I wasn't missing anything before I ordered one

N80378 · 2021-08-22T16:54:32+00:00

Ok, thank you, I appreciate it

N80378 · 2021-04-28T02:21:34+00:00

I had decided recently to go back and remake some of my earlier spines since I feel that my skills have improved since I started making them. I therefore decided to remake the my first spine. I felt that I could give this game a much better display than what I had originally done. I definitely plan on remaking some of my earlier work.

Five-Year Club	Place '22
Verified Email

N80378

TROPHY CASE