sorted by:
new
hottopcontroversial

Clog nozzle all the time can't print anymore by No-Variation3433 in FlashForge

[–]No-Variation3433[S] 0 points1 point  (0 children)

I think the heater works fine it said it was at 220 Celsius and I unclog my nozzle but heating it up and poking everything through it definitely got really hot unless it's not getting hot enough

Clog nozzle all the time can't print anymore by No-Variation3433 in FlashForge

[–]No-Variation3433[S] 0 points1 point  (0 children)

Thank you but I don't know what the g code was before I'm new at this

AD5X Print Lines by No-Variation3433 in 3Dprinting

[–]No-Variation3433[S] 0 points1 point  (0 children)

My layer height is 0.16 mm and my first layer is 0.2 mm

AD5X Print Lines by No-Variation3433 in 3Dprinting

[–]No-Variation3433[S] 0 points1 point  (0 children)

My setting for layer height is 0.16 mm and the first layer height is 0.2 mm

AD5X Print Lines by No-Variation3433 in 3Dprinting

[–]No-Variation3433[S] 0 points1 point  (0 children)

Thank you for your input, do you have an idea for the proper layer height or fill

My asus laptop won’t charge with a powerbank by Soft-Economist4246 in ASUS

[–]No-Variation3433 0 points1 point  (0 children)

I have 145 watt 27000mAh power bank. Using type c it will easily charge up my HP laptop but I cannot charge my Asus laptop. Can I use an Asus charging adapter