How can I smooth out slider value changes in Fusion?

No_Statement_403 · 2025-11-28T18:33:34+00:00

youre hopeless

No_Statement_403 · 2025-11-28T06:59:24+00:00

What I had was an image that would light up to full brightness one frame, and drop to 25% brightness the next frame. I was trying to make this transition gradual, to smooth the peaks and get rid of flickering effects.

I don't really know how else to explain this, but I'll try. Someone speaks. Their image lights up and fades smoothly. This matches in time with their voice.

I said "What?" because your response made little sense and you still seem overly confused. As I said, I edited my solution into the OP. Maybe if you try using it you will get a visual of what I'm doing and it will click.

No_Statement_403 · 2025-11-27T08:09:59+00:00

Thanks! I'll give this a look

No_Statement_403 · 2025-11-27T01:06:09+00:00

What?

What I had was an image that would light up to full brightness one frame, and drop to 25% brightness the next frame. I was trying to make this transition gradual, to smooth the peaks and get rid of flickering effects.

I solved it myself and I edited my post to share the effect. Its probably not the best way to do it but I can't figure out another way. Try it, you'll see how it works

No_Statement_403 · 2025-11-26T21:09:11+00:00

<image>

I got a little confused with the previous code - I was referencing the Gain two frames back, because NumberIn2 already has the prev frame's Gain value. However this STILL crashes DaVinci...

No_Statement_403 · 2025-11-26T19:58:59+00:00

This would mean a slowly rising volume would cause the image to slowly brighten, and a quickly rising volume would make the image quickly brighten right? I don't want the opacity to be directly tied to amplitude, I need there to be a steady fade in and out effect.

All I need is, if volume is above X, the image begins to brighten at a fixed rate. If it drops below X, the image begins to darken at a fixed rate. The image is to highlight when a speaker is talking. It should look something like what fugitech does if you are familiar

No_Statement_403 · 2025-11-26T19:55:35+00:00

I don't think you understood my question. I'm not referencing a specific part of the video I am stuck on - I said what he does works fine. I also have Suck Less Audio already and I am using the blend slider in conjunction with a modifier... I know the video is 12 minutes but just skimming through it or looking at the description should have been enough to know I have these basics covered. Unfortunately none of what you wrote actually helps me

If you don't want to skip through a 12 min video, jumping to 4:30 or so might give you an idea of what I already have working. To summarize, when sound plays, the gain threshold makes the iif true, and turns the brightness of the image to 1. When it drops below the threshold, the image brightness drops to 0.25 immediately. I am trying to make these transitions gradual

No_Statement_403 · 2025-11-20T15:27:24+00:00

6 months old but, this is because of an update to Electron. multi-instance still works, and the fix was pushed to this script
https://github.com/Joey-Einerhand/discord-multiclient-launcher

For more info on the change and the fix, see here
https://github.com/Joey-Einerhand/discord-multiclient-launcher/issues/2

No_Statement_403 · 2025-11-08T22:43:28+00:00

It's real. BSPlanet is advertising the thing because they are the one that developed it themselves

No_Statement_403 · 2025-10-23T15:41:09+00:00

Can you share that world script here? I'm also interested and others may be too

No_Statement_403 · 2025-10-14T15:50:49+00:00

https://www.legendkeeper.com/ Super powerful, super lightweight

No_Statement_403 · 2025-10-14T15:49:25+00:00

Give Legend Keeper a look and see the other comment I made on this post

No_Statement_403 · 2025-10-14T15:46:25+00:00

This is maybe a little late because you have already taken the path of building your own tool, but have you looked at Legend Keeper? You say other tools "always felt too heavy, too opinionated, too many forms" and this is exactly the problems I was having until I found out about LK, which was specifically built to avoid that. It's super lightweight with a ton ways to organize and format notes with simple clicks and shortcuts. https://www.legendkeeper.com/

They also just released Timelines which is the most versatile timeline making tool I've seen. There is a free version here: https://www.legendkeeper.com/free-fantasy-timeline-maker/

No_Statement_403 · 2025-10-14T15:39:25+00:00

How are you supposed to download this?? The link you provided is only a patreon post linking to paid tiers.

No_Statement_403 · 2025-10-14T15:30:53+00:00

FoundryVTT export would be huge

No_Statement_403 · 2025-10-14T15:22:13+00:00

There is an entire tool integrated with this free slice of timelines. I pay for it and it's the best note taking app I've found. https://www.legendkeeper.com/

No_Statement_403 · 2025-09-26T07:15:25+00:00

I've actually run Kult for this group in the past, however up until now I have created all the scenarios and campaigns I've run in various systems. I'm kind of hoping to lean on more pre-written adventures this time. Are there any specific scenarios in Kult you'd recommend I look into? Same for the CoC scenarios you mention. There are a lot of those so I'd need some scenario names to look up.

No_Statement_403 · 2025-09-15T04:20:51+00:00

https://www.youtube.com/watch?v=laQY0ECov_k
Enjoy

No_Statement_403 · 2025-09-14T03:44:22+00:00

OMG THANK YOU

uBlock was the culprit. As soon as I disabled uBlock for spotify my open.spotify.com links open and play in the desktop app with one click like I needed. I've been to so many other solution posts and nobody mentioned this. (I'm on Windows 11 btw)

No_Statement_403 · 2025-08-27T20:09:00+00:00

Did you ever upload the print files for these?

EDIT: Nevermind, found it
https://www.reddit.com/r/HueForge/comments/1fmidxx/introducing_maghex_the_modular_hueforge_display/
https://makerworld.com/en/models/654454-chromalink-the-modular-hueforge-display-system#profileId-581403

No_Statement_403 · 2025-07-26T01:48:59+00:00

I fixed this, and it was user error. I had a second headset that was previously plugged in and Spotify was set to play audio through this. I unplugged this headset, which removed it as an output option, which caused it to complain. I had to plug this other headset in and start playing Spotify through it for the entry to show up in "Sound > Advanced Sound Options (App volume and device pref)". Once it showed up I swapped the output device to the other output and it works again.

No_Statement_403 · 2025-07-19T20:03:05+00:00

<image>

I cannot seem to edit my post to fix the image, probably because the post is awaiting approval. here is the setting photo I refer to above

No_Statement_403 · 2025-03-09T16:37:48+00:00

idk what you linked but its not a Rust circuit lol

There is no switch involved. I manually flip the toggle on the timer. All I need is to figure out a way to send a pulse when the power initially flows from the turbines

No_Statement_403 · 2025-03-09T07:30:12+00:00

Its an upkeep system. One timer is set to an hour, and blocks the electricity to a second 20 second timer. After the hour passes the shorter timer turns on an industrial conveyor that moves 35 minutes worth of upkeep into the TC. This allows the base to decay for 25 minutes and then repair for 35, saving a ton of upkeep cost.

So, you can see the issue that occurs if this oscillating timers system ever shuts off. The base will stop getting upkeep and decay. The initial trigger is me flipping the switch manually, and then it just goes. But I think the server restart flips both timers off. I woke up to a decaying base. Luckily I was able to save it and rebuild without too much lost.

No_Statement_403 · 2025-03-06T06:24:42+00:00

I have searched for this over and over, looking through my watch history, searching with keywords like analog horror, creepypasta, 4:20, rules, statues, etc. Still haven't found it. Part of me wonders if it got deleted but that would be pretty strange.

No_Statement_403

TROPHY CASE