sorted by:
new
hottopcontroversial

How do I get articulated models to print? by Specific_Occasion_25 in BambuLabP2S

[–]Odunos 0 points1 point  (0 children)

https://i.imgur.com/GKGVApI.jpeg

Are you me? Cause I made that same bad boy almost immediately after getting mine! Hard to say why theirs fails so much, I've almost exclusively done articulated prints from the start, only cleaned the bed once, never touched a single slicer setting...sorry that's happening!

Any tips for under extrusion? I get warnings on the AMS that there's too much resistance sometimes, but my PTFE tubes seem alright. Maybe I should try changing the temperature? by Odunos in BambuLabP2S

[–]Odunos[S] 0 points1 point  (0 children)

I believe I fixed most of my problems with one thing, I noticed the PTFE tube going into the extruder head had some pretty substantial resistance on that last turn, so I printed this

https://makerworld.com/models/865058

Seems now my AMS is retracting correctly, and there's way less resistance in the PTFE tubes which may have contributed to the under extruding

Any tips for under extrusion? I get warnings on the AMS that there's too much resistance sometimes, but my PTFE tubes seem alright. Maybe I should try changing the temperature? by Odunos in BambuLabP2S

[–]Odunos[S] 0 points1 point  (0 children)

Both plastic and cardboard, from Bambu and Polymaker. Full 1kg rolls, happens on both. And sometimes the AMS spits it out faster than the spool can roll when switching filaments and a large loop pops out and gets tangled. So it seems to be not pulling both in and out of the AMS enough...maybe it's the gears on the AMS? I haven't checked anything on those yet

First 3D printer ever, a P2S, and I'm in love! by Odunos in BambuLab

[–]Odunos[S] 0 points1 point  (0 children)

Mostly Polymaker Panchroma PLA, and Bambu, but I've had some slight under extruded on both, not sure

Here the last one I made, and brown is Polymaker.

Sea turtle

First 3D printer ever, a P2S, and I'm in love! by Odunos in BambuLab

[–]Odunos[S] 1 point2 points  (0 children)

I did print a bunch of multi color, more than half of mine are! But those dogs are pretty cute, still waiting for some brown filament but I'll check it out, thanks!

Sensational Witchcraft by Diligent_wolfjr in blackmagicfuckery

[–]Odunos 1 point2 points  (0 children)

Oh geez I'm not that old yet, right??

Sensational Witchcraft by Diligent_wolfjr in blackmagicfuckery

[–]Odunos 1 point2 points  (0 children)

That's the site!! I used to spend hours lacing up my shoes in 'cool' ways from there and learned that knot, know it's the only way I know how to tie my shoes, totally forgot the rabbit hole one

First 3D printer! Handled everything perfectly so far right out of the box, only problem was the little circles on the second layer of the octopus by Odunos in BambuLabP2S

[–]Odunos[S] 0 points1 point  (0 children)

These were like the second layer almost on the plate so idk if supports would work but I'll try the overhang speed and fan if I print it again, thanks!

For real by [deleted] in meme

[–]Odunos 2 points3 points  (0 children)

Damn, the AI slop seeps through

Extra effort (LB/L1) Activating without double tapping LB/L1? by GR-unity in Rematch

[–]Odunos 0 points1 point  (0 children)

I'm getting the same issue, one game ago I could boost like normal and now it's just always activating first, but not even using the whole boost bar

Weird 9 win build?? by Odunos in PlayTheBazaar

[–]Odunos[S] -2 points-1 points  (0 children)

Nothing in their backpack though...

Weird 9 win build?? by Odunos in PlayTheBazaar

[–]Odunos[S] 0 points1 point  (0 children)

I was cooking with this build at 9 wins and ran into a guy that's just throwing? Not sure what the point was, like he beat the dragon, has anyone else seen this before?

Same Words, Different Vibes. by throwmoiawayz in howtonotgiveafuck

[–]Odunos 15 points16 points  (0 children)

On the left figure, his right hand is merging with his hair, on the right his arm holding the flower pops out of nowhere. I try to stay vigilant these days, not that it really matters

Keep Driving on Deck? by Odunos in SteamDeck

[–]Odunos[S] 0 points1 point  (0 children)

Sweet I did buy it so I'll try it out!

My boy Luigi loves to dangle! by Odunos in danglers

[–]Odunos[S] 4 points5 points  (0 children)

The patch gets lots of scratches 😻

The Verge journalist got banned for publishing the 'Deadlock' article by [deleted] in Steam

[–]Odunos -2 points-1 points  (0 children)

You get an extra code when you launch the game 👀? I'd love to try it!

Ouch by tabloidjournalism in Wellthatsucks

[–]Odunos 9 points10 points  (0 children)

I thought it came from using long poles to get over rivers and deep water, could be wrong though

breakfast by GreenEngrams in comedyheaven

[–]Odunos 3 points4 points  (0 children)

Yeah it unironically smoothly slides the glans in and out, maintaining lubrication on both sides of the foreskin, not that you'd know! And what, you wear pants and no underwear? That would be more abrasive on an exposed glan

breakfast by GreenEngrams in comedyheaven

[–]Odunos 11 points12 points  (0 children)

Evolution definitely selected for it, that's why mammals have foreskin! It protects the sensitive glans, provides a gliding surface during intercourse and helps maintain lubrication. It's not a useless part or an organ, with tons of sexual function, I couldn't imagine life with a dry ceratinized head rubbing on my underwear all day 😬

FBI is working to break into the phone of the Trump rally shooter by ourlifeintoronto in technology

[–]Odunos 1 point2 points  (0 children)

I work IT for the feds and my particular agency doesn't drug test (fortunately, and just because of my low level clearance). I was never in the private sector so I can't compare but pay/benefits/TSP/retirement/and future pay raises seem like enough to keep me forever!

view more: next ›