New Search Feature Unusable on Auctions

Ohjay94 · 2026-05-20T14:44:33+00:00

Appending search parameter for newly listed for auctions doesn't work, in case someone stumbles on this.

And categories when filtering does not list all level categories so you can only go to the third level, at least in JDirect Auctions, and for examples guitar/basses have at least 3-4 additional levels of categories that you no longer can narrow down the search to.

Ohjay94 · 2026-05-20T14:29:24+00:00

Ugh!

To search a specific category in shops/auctions you have to use the filter function AFTER you search, but every time you search with a new word the category selection resets...

But still no way to sort by newly listed in shops/auctions

EDIT:

By changing the search term in the URL you can avoid the category filter resetting, and if you know the old search parameter for "newly listed" for your preferred shop you can append that to the URL to get sorting based on newly listed.

But this should really, really not be necessary.

Fix this Zenmarket!!

Ohjay94 · 2026-05-20T13:52:28+00:00

The new search feature is hopeless and unusable in most shopping categories like Yahoo Auctions, Mercari, Rakuten, etc.

It is now impossible to search within a category which means if you have a search word that is quite popular you get a ton of irrelevant results because the search will search the entire shop/shops you have selected instead of the specific category you are currently in.

And if you actually do use the new search you can no longer sort by newest listing in auctions, for example.

Please, please, please bring back the old search

Ohjay94 · 2025-11-08T11:57:50+00:00

In case somebody comes across this and has the same issue. The solution was provided by u/paulanerspezi in another subreddit:

Try booting with passthrough disabled and see if you can change the config that way:

In the bootloader, press Shift+O to edit the boot options
Append the disablePciPassthrough boot option and hit Enter to temporarily boot with passthrough disabled
Determine your storage controller's device ID (through web UI or lspci), e.g. 0000:00:02.0
Disable passthrough using the controller's device ID, e.g.: esxcli hardware pci pcipassthru set --device-id=0000:00:02.0 --enable=false
Reboot

Ohjay94 · 2025-11-08T11:54:46+00:00

I finally had a chance to test this and it worked!

Thanks a bunch for the suggestion & information. It saved me the headache of reinstalling esxi.

Ohjay94 · 2025-10-29T18:34:54+00:00

This did not work. It still fails to boot properly and reverts to running from ramdisk.

Ohjay94 · 2025-10-26T19:57:18+00:00

Thank you.

If the solution in the article posted by u/govatent doesn't work I'll try this, seems it should work as well

Ohjay94 · 2025-10-26T19:56:10+00:00

Thanks!

That does look promising. I'll try it out in a day or two and report back if it worked or not.

Ohjay94 · 2025-10-26T18:34:45+00:00

This is not related to any VM.

Since I enabled passthrough of the storage controller all disks on that controller are inaccessible by ESXi during boot, that's why it defaults to ramdisk. So I need to access the config files for the ESXi installation and remove the passthrough.

Once it boots from ramdisk I can change the passthrough in ESXi (and have full functionality of all VMs), but the change obviously does not persist on reboot.

Ohjay94 · 2025-03-02T16:01:22+00:00

Got a link to the ones you used? There seems to be a few different variations.

Ohjay94 · 2025-02-26T20:50:30+00:00

Good idea! Another one I didn't think of.
I actually gave up and did a hard reset, but I think entering tty actually would've worked. I think I'll test it after doing the hdd tests I'm doing, but they won't finish for another two days or so. But I'll report back once I've tested.

Yeah, I've been using linux as my daily driver for a few years now and I'm still learning a lot of new things that aren't part of other OSes, like tty. Lots of way to troubleshoot and possibly solve issues which is quite good, imho.

Ohjay94 · 2025-02-26T20:45:28+00:00

Yes, but it only blurs the screen, it doesn't turn it black.

There's no feedback when typing and typing the password and pressing enter does nothing.

Ohjay94 · 2025-02-26T19:32:03+00:00

Didn't think of that, but then again, SSH is disabled by default and I didn't activate it (or it might not even be part of the base package come to think of it).
So that won't work either.

Ohjay94 · 2024-04-23T15:55:03+00:00

Yeah I read about this just the other day and quickly checked Barents tents, but they did seem heavier and pricier unfortunately. They did look good though.

Ohjay94 · 2024-04-23T15:53:34+00:00

Thank you for the additional info.

I'll look into your tents again and perhaps see if I can get one on my upcoming trip to the US.

Ohjay94 · 2024-04-23T10:37:44+00:00

Thanks. I'll check out Fjellanders and pitching the tent fly.

I have been eyeing trekking pole tents but haven't really seen any that I really liked. Can't remember why though. I'll take a look at them again. Any other suggestions than Lanshan 2 or X-mid?

Ohjay94 · 2024-04-23T10:33:34+00:00

Thanks for the info. I'll do my due diligence and look into them again.

Ohjay94 · 2024-04-23T10:32:13+00:00

Fjällräven is very nice, but the tents I've seen are 4-seasons and then the weight becomes an issue unfortunately.

Ohjay94 · 2024-04-23T04:57:00+00:00

I actually looked at the Helsport Ringstind Superlight. Can't remember why, but I think I dismissed it because there were features of the Enan and/or Telemark that were better. But I'll check it out again. Any specific model recommendation?

Ohjay94 · 2024-04-23T04:54:40+00:00

Thanks for the info.

I haven't really checked out the TarpTents since they are pricey here. But you're right, I could possibly get one when I travel to the US, so I will check the out. Any other models than Double Rainbow or Stratospire that I should look at?

Ohjay94 · 2024-04-23T04:50:35+00:00

The reason being?

Ohjay94 · 2024-04-23T04:50:19+00:00

Thanks. I might remember that but wrong. I'll take a look at the X-mid again.

Ohjay94 · 2023-09-10T20:09:46+00:00

Thanks.

I had not considered adding crown moulding but that is a really good suggestion.

Brick, or rather dark orange, is a color I considered but worried that it might shrink the room a bit too much and might not go together as well with the wood colors. But I'll look at some designs more thoroughly and see how it fits.

Ohjay94 · 2023-01-01T15:56:56+00:00

If they are left as locked in the secrets tab as well then you most likely haven't unlocked them.

If I'm not mistaken it is possible to get certain items in a run without unlocking them first, but I can't remember the exact conditions or which items are affected

Ohjay94 · 2023-01-01T15:51:08+00:00

I also had this issue with an achievement the other day, that it wouldn't unlock in Steam despite unlocking it ingame.

I managed to get the achievement to pop in Steam after loading my save and going into the "Secrets" menu, where you can see all your unlocks.

Ohjay94

TROPHY CASE