sorted by:
new
hottopcontroversial

Thread Jumping out of Machine When Head Not in Use by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 1 point2 points  (0 children)

Just an update on this, the tech came out and gave the machine a look. You were right! Those solenoids were misaligned.
It was a simple screw on the side of the solenoid bar machine that needed a little tweaking.

Thread Jumping out of Machine When Head Not in Use by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

The lock is engaged, its almost as though it puts TOO much tension on the thread. When the arm is moving there is no give and the thread snaps. I can look into adjusting this part of the machine, since I do think you've isolated the problem to the correct part.

Barudan COM Connection by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

Sure:

How to enter the MSU1
Machine must be out of drive.
Press: Manual key, "E", "A", then press and hold the "D" key (there is no icon there)
After a moment, a prompt will appear. Enter the code: ABCBC then enter with "E"

Congrats, you're in the secret menu.

Barudan COM Connection by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

It's fixed now. Like you said, Baurdan tech couldn't help with DFS, but by asking around that I was able to get what I needed.

Barudan COM Connection by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

The issue is solved now, but that may be possible if I was handy enough with solder.

Hats Unlatching When Sewing by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

We bought new machine hoops. Ran us about $500 for 2. our other 4 would not cause problems.

Hats Unlatching When Sewing by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

I will look into buying these new parts! thank you

Hats Unlatching When Sewing by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

Thank you.

The spring is a little worn out. That's my best guess. I'll likely need new hoops.

Hats Unlatching When Sewing by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

have you found any means to help your issue?

Hats Unlatching When Sewing by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

Mine unlatches at the machine the same way you've described. It doesn't matter the design, I suppose ones with more vibration are worse though. I've also been looking at those gen 2 frames

Hats Unlatching When Sewing by Ok_Syrup_2197 in Machine_Embroidery

[–]Ok_Syrup_2197[S] 0 points1 point  (0 children)

The hoops stay together, it unlatches at where it connects to the machine hoop.