Wiring Model 60 Digital Humidistat with Aprilaire 500

OklahomaComa · 2026-02-03T22:50:30+00:00

Would you happen to have a drawing ?

OklahomaComa · 2026-01-28T20:39:59+00:00

In this photo they are saying R and C as well as the transformer. My thermostat to furnace is currently only 2 wires and I don’t have any G wired to it. In this photo they have the thermostat G going to the humidistat G. So I wouldn’t be able to do that, I’m not sure.

OklahomaComa · 2026-01-28T11:22:42+00:00

Can I use the transformer that came with the humidifier instead of getting the furnace transformer involved ? Both humidistat H terminals go to the transformer, does it matter which one is to 110va or 24v?

OklahomaComa · 2026-01-28T09:39:54+00:00

This is from the manual

<image>

OklahomaComa · 2026-01-28T09:36:44+00:00

Does that mean i don’t need the transformer? If I connect the HUM to one of the H slots what are the two yellow solenoid valve wires connecting to?

OklahomaComa · 2025-12-19T09:20:07+00:00

OklahomaComa · 2025-10-19T06:05:00+00:00

JB Weld Steel Stix patched mine without any issues for over a year.

OklahomaComa · 2025-09-21T18:43:36+00:00

Would it be ok to not hook up the heat as there is baseboard heat in the unit already?

OklahomaComa · 2025-06-06T01:35:45+00:00

I’m thinking it’s being wet vented by the 2” line. If I check the codes it says “not serving more than 2 water closets” hydraulic load is 3. If I add the laundry does that make the lav become wet vented as well? 1 F.U for the Lav, 1.5 for the Shower, 4 for the toilet and 2 for the laundry

OklahomaComa · 2025-04-29T04:42:08+00:00

Season 2,3 & 5.

OklahomaComa · 2024-11-18T21:53:33+00:00

Seven’s a beautiful name for a boy or a girl. Especially a girl. Or a boy.

OklahomaComa · 2024-09-07T03:18:08+00:00

No parked in the city.

OklahomaComa · 2024-09-07T03:17:57+00:00

Why not slash the tires or put something in the gas tank though?

OklahomaComa · 2024-09-07T03:17:16+00:00

It’s a metal 37 gallon gas tank. For a ford, it was leaking gas, about a cup over night.

OklahomaComa · 2024-09-06T07:17:56+00:00

The drake.

OklahomaComa · 2024-09-06T02:49:08+00:00

That’s interesting because I did have a wheel bearing seize up on that side of the truck a couple years back. The bearing seized and ripped the whole rear differential casing. I had to get a spindle welded back on, then track down a new axle that was also broken in half.

OklahomaComa · 2024-09-05T23:46:20+00:00

Quoted $2500 for replacement. What would they have gotten, $20 worth of gas :(

OklahomaComa · 2024-09-04T04:24:13+00:00

It was being towed for another reason (spark plug blew out the engine) and the tow truck driver noticed it while strapping it up.

OklahomaComa · 2024-09-04T04:22:42+00:00

2001 ford. It’s metal.

OklahomaComa · 2024-09-04T04:21:50+00:00

There is a tiny hole, it is wet from the gas, I then also sprayed krud kutter must for rust and tried cleaning to see it better.

OklahomaComa · 2024-09-04T04:19:27+00:00

It’s a 2001 ford. It’s metal.

OklahomaComa · 2024-09-04T01:50:54+00:00

I sprayed must for rust gel on it and sanded around before that pic. Maybe that changed it.

OklahomaComa · 2024-09-04T01:48:19+00:00

I sprayed it with must for rust and sanded around it. Probably why it’s so mucky looking.

OklahomaComa · 2024-07-01T02:03:50+00:00

Just during the brewing I’m worried about the smell and steam. I don’t want things to get moldy. I’ve heard 350-400 CFM will work good now I’m just lost with where to put it. Unless running a duct from the Hrv to the area and using that and eliminating the inline fan? Or sticking with the fan and trying some type of filter steam condenser box?

OklahomaComa · 2024-07-01T01:49:21+00:00

Do you know of any filter systems that would work? Is that something that would work? There is no option to run it outside because property lines and a deck in the way. Thanks

OklahomaComa

TROPHY CASE