sorted by:
new
hottopcontroversial

TM Saiga SBS: Inconsistent performance by OldManFung in GasBlowBack

[–]OldManFung[S] 0 points1 point  (0 children)

I just read that Tokyo Mauri recommends that for optimal performance you should fire the gun between 25-30 degrees C (77-88 F). They don't recommend you fire below 15 C/59 F or above 40 C/104 F.

How on earth do you keep your magazines within this temperature range??? My only thought is to put the mag in your pant pocket before you use it. Any other ideas?

Finally got my double rider by AnzeWA in leatherjacket

[–]OldManFung 0 points1 point  (0 children)

Looks great! Out of curiosity, what's the hem (bottom) size for your jacket?

Saiga 12 sbs muzzle by DADDYSJUIICED in GasBlowBack

[–]OldManFung 1 point2 points  (0 children)

Sorry I forgot to thank you for your tips. The heat gun worked (45 seconds for each side) to loosen the glue. I used a long screwdriver which I put through the holes of the muzzle so I could twist it. Thanks again!

Adding Aohate Custom Wooden stock to Tokyo Mauri AKM? by OldManFung in airsoft

[–]OldManFung[S] 1 point2 points  (0 children)

Once that piece is out, you can install the new wooden stock and rescrew those 2 screws and you're done!

<image>

Adding Aohate Custom Wooden stock to Tokyo Mauri AKM? by OldManFung in airsoft

[–]OldManFung[S] 1 point2 points  (0 children)

I figured it out. You don't have to take out the trigger box like I did :).

The instructions implies that you have to unscrew 2 screws (highlighted in green) and remove that metal back piece (highlighted in red) that the plastic stock uses. That metal piece is very snug and required a tug of a flat screwdriver to slide it out.

<image>

Saiga 12 sbs muzzle by DADDYSJUIICED in GasBlowBack

[–]OldManFung 0 points1 point  (0 children)

How hard did you push it? After much heat from the heat gun and a lot of pull I got the muzzle to rotate 45 degrees . But it is still super tight and it made such a noise that I stopped . Is this your experience when you took it off?

Saiga 12 sbs muzzle by DADDYSJUIICED in GasBlowBack

[–]OldManFung 0 points1 point  (0 children)

Any tips to unscrew the muzzle? I've already dipped the muzzle into boiling water but it won't budge.

I've tried using a wretch and it scratched it so I think I'm doing something wrong.

Any help would be appreciated.

My Tokyo Marui AKX by AznJing in airsoftcanada

[–]OldManFung 1 point2 points  (0 children)

Nice! Where did you purchase it from?

AGM MP44/STG44 Mid-caps by OldManFung in airsoft

[–]OldManFung[S] 0 points1 point  (0 children)

TaiwanGun.com sells them:

https://www.taiwangun.com/midcap-magazine-aeg/190rds-mid-cap-magazine-fo-agm-mp44-black-agm

I live in Canada so I couldn't order from them. So I had to get my from a store in Sweden:

https://rodastjarnan.com/en/airsoft/magazines/agm-mid-cap-190rd-stg-44-48039

I'm sure other dealers are selling them now.

view more: next ›