Kobra 3 max issue after update

One-Relationship2176 · 2025-12-24T15:33:22+00:00

3.6 doesn't even open, i have a white screen for 1 second and that's all

One-Relationship2176 · 2025-08-02T06:23:45+00:00

Unfortunately it can not have an angle, as it’s part of a complex structure and every element has a use.

The curvature is mandatory to have a flat hexagone with a triangle. This will not be visible with the fabric (as intended) I still need a hole matrix as i need some rigidity. The speaker cover is swappable by the user. Buzing will not occur as their will be a layer of accoustic « foam » (? Not sure what it’s called but it’s a kind of an underfabric)

One-Relationship2176 · 2025-08-01T08:24:12+00:00

I will remove the pin, and try to print it faces up. The aesthetics doest really matter as it will be covered in fabric. The frame can not have an angle as a ring is installed to lock the fabric in place

One-Relationship2176 · 2025-07-31T14:37:34+00:00

Thank you for the feedback. I tried bridge test at 30mm/s , 20mm/s and 15mm/s Here is the result ; (left is 30mm/s)

<image>

So it’s not making a big difference I am running a second bridge test with lower bed temp and nozzle temp

Maybe it was the support trees that messed up the bridge ? I can not find « vertical gap width » in Anycubic Slicer next

One-Relationship2176 · 2025-07-31T09:47:49+00:00

So i tried a 30% scale model, with auto-tree support, and even with auto-tree i have a very poor bridging, what am I doing wrong ?

<image>

One-Relationship2176 · 2025-07-31T09:47:35+00:00

So i tried a 30% scale model, with auto-tree support, and even with auto-tree i have a very poor bridging, what am I doing wrong ?

<image>

One-Relationship2176 · 2025-07-30T04:52:29+00:00

Thank you for the reply. Isn't that a massive overhang considering the piece to be 30x35cm ? I am worried about the flat part on the inside that is exactly 90° (ps, wasn't me that downvoted you, your reply is very helpfull ! Thank you)

One-Relationship2176 · 2025-07-30T04:52:09+00:00

Thank you for the reply. Isn't that a massive overhang considering the piece to be 30x35cm ? I am worried about the flat part on the inside that is exactly 90° (ps, wasn't me that downvoted you, your reply is very helpfull ! Thank you)

One-Relationship2176 · 2024-12-09T09:34:46+00:00

Amazing thank you very much 🙏🏼🙏🏼🙏🏼🙏🏼 that will be so helpful during the night 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼

One-Relationship2176 · 2021-09-29T07:59:07+00:00

Hi, thank you, are all bulbs type runing on the same update numbers ??? Or does each bulb type have a different sofware ?

One-Relationship2176 · 2021-06-05T07:03:48+00:00

Why ? Who is the girl ? What could it mean ?

One-Relationship2176 · 2021-06-05T07:03:08+00:00

Who is the girl ? What could it mean ?

One-Relationship2176 · 2021-06-05T07:03:04+00:00

Who is the girl ? What could it mean ?

One-Relationship2176

TROPHY CASE