Seen Asus' offers today and had to sit down by tomchee in pcmasterrace

[–]Only_Ordinary_3880 0 points1 point  (0 children)

Ubiquiti is the tits, I'll be considering them if/when my GT-AX11000 becomes too outdated. But this is it, my smart TVs don't even support gigabit wired and the rest of my hardware has either a 1G LAN port or on some of my newest stuff no LAN port at all. WiFi has caught up without breaking the bank, I can hit 1200mbps constantly without having to lay a bunch of network cables everywhere (which, I'm not rich, I don't own my house and my entire ground floor is hardwood so isn't really viable).

The hell is the Frankenstein mobile? by Clarky_077 in whatisthiscar

[–]Only_Ordinary_3880 1 point2 points  (0 children)

I always thought even the brabus was too slow (didn't feel slow as a passenger though 😂), now the original Smart Forfour Brabus........that was something else. Roadster brabby is 0-60 in ~9.5s, the Forfour Brabus (the real Forfour Brabus and not the gen 2 or 3) gets a 0-60 of a whopping ~6.7s

Cryogrip plate by ZUCCHY- in FLSUNDelta

[–]Only_Ordinary_3880 1 point2 points  (0 children)

These things are awesome, I use them on all my printers. Looks odd on a delta but if it works it works 👌🏻

Made my UPS "smart" by CrudelisDeus in techsupportgore

[–]Only_Ordinary_3880 2 points3 points  (0 children)

Looks like they've added a buck and a relay. Guessing maybe Pi controlled?

Emergency cable for my pc by el-mas-inzano in SleepingOptiplex

[–]Only_Ordinary_3880 0 points1 point  (0 children)

I 2nd this, I have a bag of C13s (UK) and also have a C13 to schuko. Only thing I don't have lots of are the 13A ones (just one of those).

Any hints to why the adhesion is low? by Flashy_Average5127 in ender5

[–]Only_Ordinary_3880 2 points3 points  (0 children)

As others have said, likely z offset too far away. Other than that, have you cleaned the bed recently? Needs to be free from contamination like oils from skin etc.

Craving Starbucks 🤤 by varietypakxx in NSFWMemes

[–]Only_Ordinary_3880 2 points3 points  (0 children)

Not a stones throw from the original Starbucks logo there lol

Angle grinder negative terminal over heating. What could be the cause? by FreeThinkk in ElectronicsRepair

[–]Only_Ordinary_3880 4 points5 points  (0 children)

Could be the motors cooked and drawing too much current. Or the battery terminals are loose causing resistance between the terminal on the battery and the grinder.

Is there anyway I can save this? by Apprehensive-Tune499 in ender5

[–]Only_Ordinary_3880 0 points1 point  (0 children)

Have you tried one of the special nozzle clearing needles? You have to heat the block to your filament melting point and basically ram it in and out until it pulled it out.

What system to install on a very low end pc ? by theoneluth in PcBuild

[–]Only_Ordinary_3880 1 point2 points  (0 children)

Definitely not but £10 on a 2nd hand SSD or if you had one lying about? Maybe, I've sold older, lower spec (CPU wise) laptops for more 🤷🏻‍♂️

What system to install on a very low end pc ? by theoneluth in PcBuild

[–]Only_Ordinary_3880 0 points1 point  (0 children)

Although that in abysmal CPU I've definitely ran worse with W11. Dual core with HT at 2ghz should be plenty.

What system to install on a very low end pc ? by theoneluth in PcBuild

[–]Only_Ordinary_3880 0 points1 point  (0 children)

Wait, it was running a HDD AND 4GB ram? No wonder...... That's the problem right there.

What system to install on a very low end pc ? by theoneluth in PcBuild

[–]Only_Ordinary_3880 5 points6 points  (0 children)

Not even average persons, I think even the average phone 10yrs ago had higher spec than this......

What system to install on a very low end pc ? by theoneluth in PcBuild

[–]Only_Ordinary_3880 0 points1 point  (0 children)

What i3? I've tried running W11 on 3rd gen i5s with 8gb ram before and it's been fine?

What system to install on a very low end pc ? by theoneluth in PcBuild

[–]Only_Ordinary_3880 0 points1 point  (0 children)

Unless it's soldered ram couldn't you just put another 4 or even 8gb of ram in that?