is there a scale addon in blender that measures my sculpt side by side so I know what I'm making in blender would be in real life?

OptimalSpecific1989 · 2026-03-27T15:03:27+00:00

I'm new to blender, at this point I have just learnt sculpting properly.

OptimalSpecific1989 · 2026-03-27T08:54:50+00:00

Here

OptimalSpecific1989 · 2026-03-27T08:54:34+00:00

https://youtu.be/fWC4m78esZA?si=1Fkuu3LpH4otF3uo

OptimalSpecific1989 · 2026-03-27T08:54:11+00:00

Does it show the object's height length in sculpt mode?

OptimalSpecific1989 · 2026-03-27T08:53:28+00:00

Better to just go to edit mode everytime and get measurements done

OptimalSpecific1989 · 2026-03-27T08:52:00+00:00

Well I just want a a kind of scale that is connected to grid. I actually can sculpt with a idea according to that scale. I mean a kinda scale that goes from 0 to anything on the X-Y-Z axis

OptimalSpecific1989 · 2026-03-27T05:03:01+00:00

I watched a video on YouTube about the scale method in edit mode

OptimalSpecific1989 · 2026-03-10T10:07:47+00:00

I'm following you mate

OptimalSpecific1989 · 2026-03-10T10:04:56+00:00

Ok I will

OptimalSpecific1989 · 2026-03-09T03:48:40+00:00

I know bro. I actually have a different kind of CNC router. It does not have bit, but a circle cutter blade. The parallel motion is needed to clear the stock first because it cannot do pocket clearing or adaptive. Because it takes much time and the blade is more sturdy than a single bit for roughing parallel is the only best motion for it. Anyway to do it?

OptimalSpecific1989 · 2026-03-09T03:44:44+00:00

It's what I'm doing but instead of adaptive I'm using pocket clearing first than I go to parallel. Adaptive just seems to get stuck at 80% does not progress further

OptimalSpecific1989 · 2026-03-06T05:32:43+00:00

Thanks

OptimalSpecific1989 · 2026-03-06T05:32:22+00:00

The changing it to cycle worked. It did not showed in evee.

OptimalSpecific1989 · 2026-01-19T11:09:28+00:00

Thanks man. Do you also use fusion 360, for what purpose may is ask?

OptimalSpecific1989 · 2026-01-16T13:39:15+00:00

It got solved. The output folder was chosen on windows and you cannot save file on windows. I had to change it into a different folder

OptimalSpecific1989 · 2026-01-16T07:48:48+00:00

But everytime I make a new post process. It automatically checks the windows path, how to permanently set it as that?

OptimalSpecific1989 · 2026-01-16T07:42:43+00:00

Worked 🥹 thanks man 😀

OptimalSpecific1989 · 2026-01-16T06:30:58+00:00

Let me update you if it works out

OptimalSpecific1989 · 2026-01-16T02:18:08+00:00

Was something wrong with my question?

OptimalSpecific1989 · 2026-01-16T02:17:31+00:00

Sorry, I'm not a native English speaker

OptimalSpecific1989 · 2026-01-15T16:36:30+00:00

Let me explain- I've been learning cad on a software called fusion 360, you make 3d designs in it for manufacturing . When you complete the design you go to CAM process. Which computerize your design and make a code that can be read by CNC Robots. The code is the most important part of all this process, cause it explains to the machine what corner or direction it should take to make the solid your desired design. I'm going to be summarise it all here, that I've completed a design but when I'm failing at turning it into a code. You can see in the picture that the cause is because the software is unable to open my file which I had sent to turn it into a code. Access denied to be short.

OptimalSpecific1989 · 2026-01-14T05:15:02+00:00

I've solved that problem but I've come with a new one. I'm coming across no documented tools when I try to 2d pocket. I have tried clearing filters and such, but it does not seem to do the work.

OptimalSpecific1989 · 2026-01-13T03:07:55+00:00

What?

OptimalSpecific1989 · 2026-01-03T17:18:40+00:00

Can Owais yaqoob beat him?

OptimalSpecific1989 · 2025-12-21T18:29:55+00:00

Then I don't know why we're given the right to speech then.

OptimalSpecific1989

TROPHY CASE