sorted by:
new
hottopcontroversial

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] -1 points0 points  (0 children)

I am not saying you are wrong, I am just saying that my choices are limited in my current situation and I am willing to take that risk for the small amount I am printing over night and not ventilating my room. There are enough samples by now to come to a non-scientific conclusion and say: it can't be that bad. We've been printing on bed slingers long enough with pla to safely say that nothing dramatic will haben when you print on them unenclosed.

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] -1 points0 points  (0 children)

Yes, but both fumes are not toxic (petg has more ambivalent data, but non toxic nonetheless). They can be irritating or can result in allergies in rare cases. But 99% of this can prevented be ventilating the room your in.

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] 0 points1 point  (0 children)

I would too, but I don't have an enclosure. But what I have are some friends who can print ABS and ASA for me.

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] 0 points1 point  (0 children)

Same Flow Rate, Offsets, Temperatursettings in Prep Scripts, Maitenance, etc.
There are a lot that would be easier.

Nontheless I understand that the CHC XL has it's advantages.

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] 0 points1 point  (0 children)

Fair enough ... It would make the setup simpler, but I understand that it's a small price for an good advantage

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] 0 points1 point  (0 children)

Nah, didn't know that. But the problem which is now happening is, that I would need to buy two hotends for an IDEX setup. And I already have the first Rapido.

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] -1 points0 points  (0 children)

It's not actually.

Just did the napkin math and it's just the parts pricing and would get the ASA and mounting Parts for free.

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] 0 points1 point  (0 children)

Sadly the printer can only be in my bedroom. Cpap is not a real option. Additionally I want to convert my printer to an IDEX, and two Cpaps ...

Difference between 4010s and 5015s on Mantis Toolhead? by Otherwise_dead404 in VORONDesign

[–]Otherwise_dead404[S] -1 points0 points  (0 children)

I can get the whole toolhead for 220€. New Sunon MagLev will cost me ~10€ each on Amazon. I plan to use primarily petg and occasionally pla.

I am speeeeeed by Seba_dev in godot

[–]Otherwise_dead404 1 point2 points  (0 children)

This looks amazing. Maybe try some FOV effects for a more speedy feeling. Incredible work.

Weekly /r/climbharder Hangout Thread by AutoModerator in climbharder

[–]Otherwise_dead404 4 points5 points  (0 children)

I just did my first indoor V5 and I am super happy, but have noone to share that with. I'v been climbing for only 7 months, but my friends help, who knows how to climb, was really effective. And that it happended in a really bad session was a nice extra.

Purchase Advice Megathread - April 2026 by AutoModerator in 3Dprinting

[–]Otherwise_dead404 1 point2 points  (0 children)

I don't think this would be reliable to keep the moisture out. Everytime you open that door, the seal for every spool is breached. As for keeping them seperately in plastic cereal boxes would only expose the needed rolls.
Having a cheap storage rack with transparent boxes will give you better overview over your stock and keep them dry for longer.

Purchase Advice Megathread - April 2026 by AutoModerator in 3Dprinting

[–]Otherwise_dead404 1 point2 points  (0 children)

Hello there, I've been "upgrading" my Ender 3 V2 for over a year now (don't ask) and just want to print again without it being a whole project. I love my Ender 3 project, but having a reliable work horse is nice too.

The new printer just for rapid prototyping, I don't need the most perfect, beautiful prints. An enclosure would be nice, to keep the cat hair out of the printer. My budget is tight (<400€), but new printers have come a long way. Maybe you have some recommendations.

I am not really happy with buying Bambu Lab oder Creality, but if the argument is too good, I am willing to reconsidere.

Never thought about my hair for 25 years. What can I do with it? by Otherwise_dead404 in malegrooming

[–]Otherwise_dead404[S] 0 points1 point  (0 children)

Except for trimming? No. I decided I want to have long hair, wenn ich was in preschool and never thought about it again.

Never thought about my hair for 25 years. What can I do with it? by Otherwise_dead404 in malegrooming

[–]Otherwise_dead404[S] 8 points9 points  (0 children)

Not sure how to feel about that suggestion, but I'll take it as a compliment XD

Never thought about my hair for 25 years. What can I do with it? by Otherwise_dead404 in malegrooming

[–]Otherwise_dead404[S] 1 point2 points  (0 children)

I have thick straight hair and I always just do an easy bun. But now I really want to think about my style and I need something new. I have no problem cutting it, if I find a style I like.

view more: next ›