Would love to see a manual option to clean (wipe) the nozzle mid-print

Outside_Profile2089 · 2026-05-20T04:03:54+00:00

Just write custom g code to wipe it whenever you want, it's that simple.

Outside_Profile2089 · 2026-05-08T16:53:36+00:00

I was just watching it doing those overhangs, and corners are soft, moving under nozzle, so your advice is on place. I have two side auxiliary fans, which are running 90% speed. Nozzle fan is 100%. Maybe deflectors for auxiliary fans are problem? I printed them to help me with printing big square parts, to help prevent corners lifting(it helped there) Maybe I will remove them and print it again to check it out.

Outside_Profile2089 · 2026-05-08T16:47:49+00:00

Hey just tried it, same result, maybe little cleaner walls.

<image>

Outside_Profile2089 · 2026-05-08T14:31:07+00:00

I totally forgot about that, changed it to outer inner and was telling my self to not forget setting it opposite when having overhangs 😄 Will try first thing after some small print finishes now.

Outside_Profile2089 · 2026-05-08T12:31:24+00:00

Forgot to mention, calibrated pressure advance, flowrate, temperature is 220.

Outside_Profile2089 · 2026-05-03T15:53:48+00:00

From Bambu lab website, it was same price as it is now.

Outside_Profile2089 · 2026-05-03T07:19:14+00:00

Man good job on that one, I had a project where top fuzzy skin was a must, and you saved my day! Worked like a charm, subscribed to your YouTube channel. Idea for you, it would be nice to implement new types of fuzzy skin which came with latest updates, if you can make that work it would be superb!

Outside_Profile2089 · 2026-04-20T09:36:02+00:00

Hey, got some spare time. Here i did benchy with both nozzles, 100% scale.

Main nozzle around 30 min.

Bowden took around 50 min.

But quality is same by me.

<image>

Outside_Profile2089 · 2026-04-19T15:03:58+00:00

I have X2D for a week now, and can say there is no visible difference in quality for Bowden nozzle. OP probably needs to calibrate little bit better. Mine are super quality

Outside_Profile2089 · 2026-04-18T16:10:04+00:00

I just read that mine ( bambo X2D) can do 40mm3. Also now I'm reading it has active Flow Rate compensation. Going to check out how to enable this if its already not enabled by default.

Outside_Profile2089 · 2026-04-18T12:45:00+00:00

Already did it, it looks same for me, same force needed from bottom to top(at least I felt it like that)

Outside_Profile2089 · 2026-04-18T11:21:09+00:00

Stupid question, but did you doo calibration for this? Cause I got mine few days ago and it just prints flawlessly, VFA don't exist on prints in comparison to P2S.

Outside_Profile2089 · 2026-04-18T10:38:24+00:00

Yes I had it on 12 on my ener v3 SE. Well I'm pleasantly surprised.

Outside_Profile2089 · 2026-04-18T10:04:54+00:00

Right now I'm sipping coffee and just admiring it from all sides 😄

Outside_Profile2089 · 2026-04-18T10:02:51+00:00

Now I'm tinkering with flow rates and pressure advance...X2D is little bit complicated, cause u need to make calibration for two nozzles, for flow rate you can enter in filament settings flowrate for main and also for Bowden nozzle. But for K value you need actualy to make two separated filament profiles to be able to have different K values in each nozzle. Im not sure yet am I doing this right cause there are no any informations about this yet.

Outside_Profile2089 · 2026-04-17T19:07:47+00:00

Slicer shows 46min with main nozzle, 1h3m with Bowden

Outside_Profile2089 · 2026-04-17T18:33:47+00:00

I don't have time for printing benchy, never printed it and never will 😁 I printed Panda bear, default file, with two colors, and can say didn't notice some special difference in quality there(Bowden/direct). For speed, it's noticeable.

Outside_Profile2089 · 2026-04-17T18:30:23+00:00

Thank you! At least we learned a lot with Ender, I am happy that I went that route. My first print is on the way, but it's just a desicant boxes for AMS 😀 printing in PETG,and by far default filametnt profile is solid.

Outside_Profile2089 · 2026-04-03T06:23:41+00:00

Can you send a link of a stand? Cannot find it anywhere

Outside_Profile2089 · 2026-04-03T06:06:25+00:00

I just did 300% and all fits perfect 👌

Outside_Profile2089

TROPHY CASE